hello all,
i just upgrade from release 3 to 4, and i'm not sure that everything is ok.
With release 3, a snoop shows:
t2000-root% snoop port 67
Using device /dev/e1000g0 (promiscuous mode)
192.168.1.84 -> t2000 DHCP/BOOTP DHCPREQUEST
t2000 -> 192.168.1.84 DHCP/BOOTP DHCPACK
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPDISCOVER
nagios.moi.fr -> BROADCAST DHCP/BOOTP DHCPDISCOVER
t2000 -> BROADCAST DHCP/BOOTP DHCPOFFER
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPDISCOVER
t2000 -> BROADCAST DHCP/BOOTP DHCPOFFER
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPREQUEST
t2000 -> BROADCAST DHCP/BOOTP DHCPACK
192.168.1.242 -> BROADCAST DHCP/BOOTP DHCPINFORM
t2000 -> 192.168.1.242 DHCP/BOOTP DHCPACK
192.168.1.242 -> BROADCAST DHCP/BOOTP DHCPINFORM
but with release 4:
fury-root% snoop port 67
Using device /dev/e1000g0 (promiscuous mode)
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPDISCOVER
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPDISCOVER
nagios.moi.fr -> BROADCAST DHCP/BOOTP DHCPDISCOVER
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPDISCOVER
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPDISCOVER
i ran dhcpd in debug mode, and i never see the client appearing in the logs.
Is it possible to stay at release 3, but with SMF enabled?
thanks in advance,
gerard
_______________________________________________
users mailing list
[email protected]
https://lists.opencsw.org/mailman/listinfo/users
