Thanks for the response Juergen!
index.html and definitions.html should be created automatically after your
configured hosts are checked for the first time. About the other files I'm not
sure at the moment.
Currently I'm moving into another city. I will take a look for these files -
and correct this - as soon as I get a broadband speed internet connection,
which should be in the next few days. I will upgrade then to 1.4.3 too.
Thank you for your feedback!
Juergen
So far I have the base config as I'm using the system in a VM on my
notebook to test as I will be using them on a SPARC system soon.
Munin-node was up and running; since I only have the local host defined
the system *should* scan itself as when cross-comparing the config from
my current setup which resides on a Linux Box - they are exactly the
same for the internal machine.
Ok a few little notes now as I'm just cross-comparing further as typing
this:
Munin-check response:
# /opt/csw/bin/munin-check
Check /var/opt/csw/munin/www
Check miscelaneous
# /var/opt/csw/munin/db : Wrong permissions (755 != 744)
stat: cannot stat `/var/opt/csw/munin/db/datafile': No such file or
directory
# /var/opt/csw/munin/db/datafile : Wrong owner ( != munin)
stat: cannot stat `/var/opt/csw/munin/db/datafile': No such file or
directory
# /var/opt/csw/munin/db/datafile : Wrong permissions ( != 644)
stat: cannot stat `/var/opt/csw/munin/db/limits': No such file or directory
# /var/opt/csw/munin/db/limits : Wrong owner ( != munin)
stat: cannot stat `/var/opt/csw/munin/db/limits': No such file or directory
# /var/opt/csw/munin/db/limits : Wrong permissions ( != 644)
stat: cannot stat `/var/opt/csw/munin/db/*.stats': No such file or directory
# /var/opt/csw/munin/db/*.stats : Wrong owner ( != munin)
stat: cannot stat `/var/opt/csw/munin/db/*.stats': No such file or directory
# /var/opt/csw/munin/db/*.stats : Wrong permissions ( != 644)
# /var/opt/csw/munin/db/plugin-state : Wrong owner (munin != nobody)
# /var/opt/csw/munin/db/plugin-state : Wrong permissions (755 != 775)
Check done. Please note that this script only checks most things,
not all things.
Please also note that this script is very new and may be buggy.
I also created a cron job which I inserted into /etc/cron.d as there
wasn't any pre-installed:
*/5 * * * * munin test -x /usr/bin/munin-cron && /usr/bin/munin-cron
> /dev/null 2>&1
This was directly copied from Linux so I changed the file locations to
/opt/csw/bin/munin-cron!
There currently is a PID of munin-node running so that's a good sign:
# ls /var/opt/csw/munin/run
munin-node.pid
This is all I could evaluate at the present moment!!
I will wait a bit and see if the index.html file does actually appear;
if not I'll compare the munin-check output with my working version on
Linux and see what happens there....
Regards,
Kaya
_______________________________________________
users mailing list
[email protected]
https://lists.opencsw.org/mailman/listinfo/users
