OK, the problem with the vncviewer was yet another beginners' mistake. I am now
able to log into the ttylinux-VM and perform a "ifconfig". Here's what I get:
eth0 Link encap:Ethernet Hardware Adresse 02:00:C0:A8:00:05
inet Adresse:192.168.0.5 Bcast:192.168.0.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
Metrik:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:321 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 B) TX bytes:19260 (18.8 KB)
Interrupt:11 Basisadresse: 0xc100
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436
Metrik:1
RX packets:320 errors:0 dropped:0 overruns:0 frame:0
TX packets:320 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:35840 (35.0 KB) TX bytes:35840 (35.0 KB)
And still I can't ping whether the host PC (192.168.0.3), nor the ONE-frontend
(192.168.0.1). Obviously it's some kind of virtual-network configuration issue.
However, strangely the migration and suspend/resume etc. are working, but only
the ping won't do!
________________________________
Von: Adnan Pasic <[email protected]>
An: "[email protected]" <[email protected]>
Gesendet: 12:13 Dienstag, 31.Mai 2011
Betreff: [one-users] Yet another problem with connecting to ttylinux via ssh
Hello,
I've been trying to enter my ttylinux-VM from the tutorial, but somehow the
connection just cant be established. Every time I get a "no route to host"
error, when I try the various IP's. First of all, here are my ifconfig data,
after the VM has been created:
eth0 Link encap:Ethernet Hardware Adresse 00:19:99:03:b0:3e
inet Adresse:192.168.0.3 Bcast:192.168.0.255 Maske:255.255.255.0
inet6-Adresse: fe80::219:99ff:fe03:b03e/64
Gültigkeitsbereich:Verbindng
UP BROADCAST RUNNING MULTICAST MTU:1500
Metrik:1
RX packets:21659 errors:0 dropped:0 overruns:0 frame:0
TX packets:10582 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:31304320 (31.3 MB) TX bytes:776923 (776.9 KB)
Interrupt:17
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436
Metrik:1
RX packets:70 errors:0 dropped:0 overruns:0 frame:0
TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:5584 (5.5 KB) TX bytes:5584 (5.5 KB)
virbr0 Link encap:Ethernet Hardware Adresse fe:00:c0:a8:00:06
inet Adresse:192.168.122.1 Bcast:192.168.122.255 Maske:255.255.255.0
inet6-Adresse: fe80::a8e2:ff:fe60:a424/64
Gültigkeitsbereich:Verbindugn
UP BROADCAST RUNNING MULTICAST MTU:1500
Metrik:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:230 (230.0 B) TX bytes:5750 (5.7 KB)
vnet0 Link encap:Ethernet Hardware Adresse fe:00:c0:a8:00:06
inet6-Adresse: fe80::fc00:c0ff:fea8:6/64
Gültigkeitsbereich:Verbindun UP BROADCAST RUNNING MULTICAST
MTU:1500 Metrik:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:17
errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:500
RX bytes:300 (300.0 B) TX bytes:1040 (1.0 KB)
The VM has been created with the IP 192.168.0.5, but when I try to ssh onto it,
I get the above mentioned error. Strangely, when I perform a "sudo vncviewer
localhost:6789" I get the screen of the VM, but can't also do anything in it. I
try to type in the password, but no keystrokes get taken over and the vncviewer
screen looks more like just a screenshot through which I can scroll up and down.
This is my network-configuration:
NAME = "Small Network"
TYPE = FIXED
BRIDGE = virbr0
LEASES = [IP=192.168.0.5]
Anyone got an idea???
Thanks!
_______________________________________________
Users mailing list
[email protected]
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
_______________________________________________
Users mailing list
[email protected]
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
