Dear Vladimir, On Mon, Feb 27, 2012 at 3:33 PM, Oemer Suermen <[email protected]>wrote:
> Hello Tino,**** > > ** ** > > i can connect without problems over telnet (port 443) to the ESXi-Host.*** > * > > ** ** > > *These are will be shown, if I type the virsh -c command:* > > ** ** > > opennebula.local.de:~ # virsh -c esx://esxi01.local.de/?no_verify=1--readonly > nodeinfo > **** > > Enter username for esxi01.local.de [root]: oneadmin**** > > Enter oneadmin's password for esxi01.local.de: **** > > CPU model: Intel Xeon CPU X5450 @ 3.00GHz**** > > CPU(s): 8**** > > CPU frequency: 3000 MHz**** > > CPU socket(s): 2**** > > Core(s) per socket: 4**** > > Thread(s) per core: 1**** > > NUMA cell(s): 1**** > > Memory size: 33551960 kB > Good > **** > > ** ** > > My problem is that the VM´s, which running on the ESXi-Host, before I > beginning the work with opennebula, will not shown.**** > > ** ** > > Can opennebula the existing VMs on the ESXi-Host, which before was creates > with the vSphere from vmware, in opennebula shown? > Nope, OpenNebula assumes an exclusive management of resources, and it won't import them automatically. > **** > > Is it possible that I all my ESXi-hosts and the VM´s on it, centrally can > administrating with opennebula? > Certainly, but you need to create them through OpenNebula. Regards, -Tino > **** > > ** ** > > I unfortunately will not help if I can just create VM´s on opennebula via > templates, i hope it is not so.**** > > ** ** > > Find also nothing in the mail archives.**** > > ** ** > > Thanks for your help.**** > > ** ** > > Nice greetings,**** > > Ömer**** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > **** > > *Von:* Tino Vazquez [mailto:[email protected]] > *Gesendet:* Donnerstag, 23. Februar 2012 12:24 > *An:* Oemer Suermen > *Cc:* users > > *Betreff:* Re: [one-users] ERROR after create a Host over Sunstone or > over front-end**** > > ** ** > > Dear Omer,**** > > ** ** > > That looks like a network connectivity problem, not related to OpenNebula > configuration. Please make sure that you can telnet the 443 from the > front-end to the ESX host.**** > > ** ** > > Regards,**** > > ** ** > > -Tino**** > > > -- > Constantino Vázquez Blanco, MSc > Project Engineer > OpenNebula - The Open-Source Solution for Data Center Virtualization > www.OpenNebula.org | @tinova79 | @OpenNebula > > **** > > On Thu, Feb 23, 2012 at 11:37 AM, Oemer Suermen <[email protected]> > wrote:**** > > Hi Tino,**** > > **** > > here the output from virsh -c**** > > **** > > opennebula.local.de.easynet.net:/etc/one # virsh -c gsx:// > esxi01.local.de.easynet.net/?no_verify=1 --readonly nodeinfo**** > > Enter username for esxi01.local.de.easynet.net [root]: > myusername**** > > Enter oneadmin's password for esxi01.local.de.easynet.net: > **** > > error: internal error curl_easy_perform() returned an > error: Couldn't connect to server (7) : couldn't connect to host**** > > error: failed to connect to the hypervisor**** > > **** > > **** > > *++++ Here my vmwarerc ++++***** > > **** > > # User configurable variables (Ruby syntax)**** > > LIBVIRT_URI = "esx://esxi01.local.de.easynet.net/?no_verify=1"**** > > QEMU_PROTOCOL = "qemu"**** > > **** > > # Username and password of the VMware hypervisor**** > > USERNAME = "oneadmin"**** > > PASSWORD = "mypassword"**** > > DATACENTER = "Datacenter" #only for > vMotion**** > > VCENTER = "vCenter" > #only for vMotion**** > > **** > > **** > > **** > > # Loading the vmware library for mads**** > > # Please leave this uncommented**** > > ONE_LOCATION=ENV["ONE_LOCATION"] if !defined?(ONE_LOCATION)**** > > **** > > if !ONE_LOCATION**** > > LIB_LOCATION = "/usr/lib/one" if !defined?(LIB_LOCATION)**** > > else**** > > LIB_LOCATION = ONE_LOCATION+"/lib" if !defined?(LIB_LOCATION)**** > > end**** > > **** > > load LIB_LOCATION + "/ruby/vmwarelib.rb"**** > > **** > > ENV['LANG']='C'**** > > **** > > **** > > **** > > **** > > **** > > Thanks for your help.**** > > **** > > Greetings,**** > > Ömer**** > > **** > > **** > > **** > > **** > > **** > > -----Ursprüngliche Nachricht----- > Von: Tino Vazquez [mailto:[email protected]] > Gesendet: Freitag, 17. Februar 2012 15:26 > An: Oemer Suermen > Cc: [email protected] > Betreff: Re: [one-users] ERROR after create a Host over Sunstone or over > front-end**** > > **** > > Dear Omer,**** > > **** > > What is the output of "virsh -c**** > > gsx://esxi01.local.de.easynet.net/?no_verify=1 --readonly nodeinfo"?**** > > If there seems to be a connectivity problem, please make sure that your > network configuration allows the connection between the ONE front-end and " > esxi01.local.de.easynet.net".**** > > **** > > Regards,**** > > **** > > -Tino**** > > **** > > --**** > > Constantino Vázquez Blanco, MSc**** > > Project Engineer**** > > OpenNebula - The Open-Source Solution for Data Center Virtualization > www.OpenNebula.org | @tinova79 | @OpenNebula**** > > **** > > **** > > **** > > **** > > **** > > On Thu, Feb 16, 2012 at 1:54 PM, Oemer Suermen <[email protected]> > wrote:**** > > > Hi guys,**** > > > **** > > > i have a new problem.**** > > > **** > > > I try to create a new Host over the sunstone gui and over the front-end > but always in ERROR.**** > > > **** > > > Here is a little snapshot from the oned.log with this ERROR, maybe you > can help to resolve this problem.**** > > > **** > > > Thu Feb 16 14:21:10 2012 [AuM][I]: ExitCode: 0**** > > > Thu Feb 16 14:21:10 2012 [AuM][D]: Message received: **** > > > AUTHENTICATE SUCCESS 2 -**** > > > **** > > > Thu Feb 16 14:21:10 2012 [ReM][D]: HostInfo method invoked**** > > > Thu Feb 16 14:21:12 2012 [ReM][D]: HostInfo method invoked**** > > > Thu Feb 16 14:21:15 2012 [InM][I]: Monitoring host **** > > > esxi01.local.de.easynet.net (17)**** > > > Thu Feb 16 14:21:17 2012 [InM][I]: Command execution fail: **** > > > /var/lib/one/remotes/im/run_probes vmware 17 **** > > > esxi01.local.de.easynet.net**** > > > Thu Feb 16 14:21:17 2012 [InM][I]: [VMWARE] cmd failed > [/usr/bin/tty_expect -u oneadmin -p XXX virsh -c gsx:// > esxi01.local.de.easynet.net/?no_verify=1 --readonly nodeinfo]. Stderr:**** > > > Thu Feb 16 14:21:17 2012 [InM][I]: error: internal error **** > > > curl_easy_perform() returned an error: Couldn't connect to server (7) ** > ** > > > : couldn't connect to host**** > > > Thu Feb 16 14:21:17 2012 [InM][I]: error: failed to connect to ** > ** > > > the hypervisor**** > > > Thu Feb 16 14:21:17 2012 [InM][I]: . Stdout: ExitCode: 1**** > > > Thu Feb 16 14:21:17 2012 [InM][I]: ./vmware.rb:72: private **** > > > method `split' called for 1:Fixnum (NoMethodError)**** > > > Thu Feb 16 14:21:17 2012 [InM][E]: Error executing vmware.rb**** > > > Thu Feb 16 14:21:17 2012 [InM][I]: ExitCode: 1**** > > > Thu Feb 16 14:21:17 2012 [InM][E]: Error monitoring host 17 : *** > * > > > MONITOR FAILURE 17 Error executing vmware.rb**** > > > **** > > > **** > > > Here a message from the Sunstone GUI:**** > > > **** > > > Host template**** > > > ERROR**** > > > **** > > > TIMESTAMP Thu Feb 16 14:21:17 2012**** > > > MESSAGE Error monitoring host 17 : MONITOR FAILURE 17 *** > * > > > Error executing vmware.rb**** > > > **** > > > Status = Error**** > > > State = Error**** > > > **** > > > I thank you in advance for your help, you responds very quickly, which > work with the opennebula agreeably.**** > > > Even if there are problems here and there.**** > > > **** > > > Regards,**** > > > Ömer**** > > > **** > > > _______________________________________________**** > > > Users mailing list**** > > > [email protected]**** > > > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org**** > > ** ** >
_______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
