Dears, after almost one month nothing changes...
2012/5/28 cloud.b.lab <[email protected]> > ** > Erico, > > Quick cross checks: > > Try connecting to the VM using VNC and check if the IP assigned is same as > the one below [Hope you are using Contextualization]. > It isn't possible to use VNC if I'm not able to ping, nmap or ssh the image. > See if the ICMP protocol is blocked. > No, it isn't ... running image through virtualbox, I'm able to ping, nmap and ssh the image. > Try by switching off the firewall > Firewall has no rules: $ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination But, now, it's clear that the problem is with our image. When configure and run ttyimage, all works fine. Nevertheless, we use our image on ON 2.1 and it works fine. It's all customized image, with all applications installed and running. We simple do not have any creative ideas to solve the problem ... we try everything possible, and we can not connect image. any further suggestions? thanks a lot, Erico. > > Regards, > anil. > > ---- On Mon, 28 May 2012 18:12:24 -0700 *Erico Augusto Cavalcanti Guedes < > [email protected]>* wrote ---- > > Dears OpenNebula Users, > > $ /srv3/cloud/one/bin/onevm list > ID USER GROUP NAME STAT CPU MEM > HOSTNAME TIME > 11 oneadmin oneadmin CloudProxy runn 0 128M mc3-node03 > 3d 04:02 > > $ tail -n 6 /srv3/cloud/one/var/11/vm.log > Mon May 28 20:59:39 2012 [VMM][I]: ExitCode: 0 > Mon May 28 20:59:39 2012 [VMM][D]: Monitor Information: > CPU : 0 > Memory: 131072 > Net_TX: 0 > Net_RX: 489564544 > > $ /srv3/cloud/one/bin/onevm show 11 > ... > NIC=[ > BRIDGE="br0", > IP="192.168.15.2", > MAC="02:00:c0:a8:0f:02", > NETWORK="Modcs", > NETWORK_ID="0", > VLAN="NO" ] > ... > > ifconfig from frontend > $ ifconfig > br0 Link encap:Ethernet HWaddr 00:1f:d0:e2:4e:b9 > inet addr:192.168.15.254 Bcast:192.168.15.255 > Mask:255.255.255.0 > ... > > eth0 Link encap:Ethernet HWaddr 00:1f:d0:e2:4e:b9 > inet addr:192.168.15.200 Bcast:0.0.0.0 Mask:255.255.255.0 > ... > > > As can be viewed, VM status is runn and it is logging, but no contact can > be made with it: > > $ ping 192.168.15.2 > PING 192.168.15.2 (192.168.15.2) 56(84) bytes of data. > From 192.168.15.254 icmp_seq=1 Destination Host Unreachable > From 192.168.15.254 icmp_seq=2 Destination Host Unreachable > From 192.168.15.254 icmp_seq=3 Destination Host Unreachable > > bridge, datastore, vnet and image are properly created and tested. > I used arp-scan, trying to visualize VM IP, but it doesn't works. > > Some advices? > > Thanks, > > Erico. > > > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > > >
_______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
