Dear Jairo, The IP of the OpenNebula VMware Sandbox appliance is set by DHCP, so "192.168.122.1" is the value you should use to configure your ESX datastores with this IP as the server IP. The "192.168.2.122" is just the IP used for the sandbox during the confection of the documentation, you can safely disregard it.
BTW, the appliance has been taken down for maintenance, so you may want to stay tuned for next week, since we plan to put it back with an updated OpenNebula. Best regards, -Tino -- Constantino Vázquez Blanco, MSc Project Engineer OpenNebula - The Open-Source Solution for Data Center Virtualization www.OpenNebula.org | @tinova79 | @OpenNebula On Thu, Oct 4, 2012 at 10:56 PM, Jairo Iván Velez Bedoya <[email protected]> wrote: > Greetings to all, > > I have followed each step of the process to install and configure the vmware > test appliance -sandbox- and when I try to add the datastores I get stucked > because the guide shows the server ip : 192.168.2.122 and the appliance has > the ip: 192.168.122.1. Is this correct or should I change something, because > I get NFS error even if I write the appliance IP or the ESX server IP?; by > the way the ESX has the ip: 192.168.174.128, and if I do ping from the esx > server to the appliance´s IP it works perfectly but not at the contrary. > > If anyone can give me a possible solution that would be great. > > Thanks in advance > JV > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > _______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
