Tino,
This is challenging:-)
--------------------------------------------------------------------------------------------------------------------------------------------------------
<domain type='vmware'>
<name>one-58</name>
<vcpu>2</vcpu>
<memory>4120576</memory>
<os>
<type arch='x86_64'>hvm</type>
</os>
<devices>
<disk type='file' device='disk'>
<source file='[0] 58/disk.0/disk.vmdk'/>
<target dev='sda' bus='scsi'/>
</disk>
<disk type='file' device='cdrom'>
<source file='[0] 58/disk.1.iso'/>
<target dev='hda'/>
<readonly/>
</disk>
<interface type='bridge'>
<source bridge='usr-dsrg-td-reserved1'/>
<mac address='02:00:ac:11:4d:d3'/>
<model type='vmxnet3'/>
</interface>
<graphics type='vnc' listen='0.0.0.0' port='5958'/>
</devices>
</domain>
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I commented the driver section and now getting the error related to
CDROM. I suppose that this can be set in the template?
Thu Oct 18 07:53:00 2012 [VMM][I]: Command execution fail:
/var/lib/one/remotes/vmm/vmware/deploy /var/lib/one/58/deployment.0
172.17.70.38 58 172.17.70.38
Thu Oct 18 07:53:00 2012 [VMM][D]: deploy: Successfully defined domain one-58.
Thu Oct 18 07:53:00 2012 [VMM][E]: deploy: Error executing: virsh -c
'esx://172.17.70.38/?no_verify=1&auto_answer=1' start one-58 err: ExitCode: 1
Thu Oct 18 07:53:00 2012 [VMM][I]: out:
Thu Oct 18 07:53:00 2012 [VMM][I]: error: Failed to start domain one-58
Thu Oct 18 07:53:00 2012 [VMM][I]: error: internal error Could not start
domain: GenericVmConfigFault - The IDE device (disks/CD-ROM) configuration is
incorrect. There is an IDE slave with no master at ide0:1. This configuration
does not work correctly in virtual machines. Move the disk/CD-ROM from ide0:1
to ide0:0 using the configuration editor.
Since I want to solve the problem I edited the libvirt domain to change
the CDROM to use 'hda' instead of 'hdb'
<disk type='file' device='cdrom'>
<source file='[0] 58/disk.1.iso'/>
<target dev='hda'/>
<readonly/>
</disk>
Next I got the error related to 'other' issues:
/var/lib/one/remotes/vmm/vmware/deploy /var/lib/one/58/deployment.0
172.17.70.38 58 172.17.70.38
DEBUG: deploy: Successfully defined domain one-58.
ERROR: deploy: Error executing: virsh -c
'esx://172.17.70.38/?no_verify=1&auto_answer=1' start one-58 err:
ExitCode: 1
out:
error: Failed to start domain one-58
error: internal error Could not start domain: GenericVmConfigFault -
Module DevicePowerOn power on failed.
On cloud-b-lab portal I read that this due bad thin provisioning
operation of the disk from the VM reference machine. But I did
vmkfstools with "-d thin" option.
The content of the vmx file is bellow. I'm curious if this might be
related to VM container type which should be guestOS = "windows7srv-64"?
--------------------------------------------------------------------------------------------------------------------------------------
.encoding = "UTF-8"
config.version = "8"
virtualHW.version = "8"
guestOS = "other-64"
uuid.bios = "45 a0 cb 5a 4d 7b e0 ad-be 24 65 5f 64 3a 17 e6"
displayName = "one-58"
memsize = "4024"
numvcpus = "2"
RemoteDisplay.vnc.enabled = "true"
RemoteDisplay.vnc.port = "5958"
RemoteDisplay.vnc.ip = "0.0.0.0"
scsi0.present = "true"
scsi0:0.present = "true"
scsi0:0.deviceType = "scsi-hardDisk"
scsi0:0.fileName = "/vmfs/volumes/606147ee-7de1a2bf/58/disk.0/disk.vmdk"
ide0:0.present = "true"
ide0:0.deviceType = "cdrom-image"
ide0:0.fileName = "/vmfs/volumes/606147ee-7de1a2bf/58/disk.1.iso"
floppy0.present = "false"
floppy1.present = "false"
ethernet0.present = "true"
ethernet0.virtualDev = "vmxnet3"
ethernet0.networkName = "usr-dsrg-td-reserved1"
ethernet0.connectionType = "bridged"
ethernet0.addressType = "static"
ethernet0.address = "02:00:AC:11:4D:D3"
ethernet0.checkMACAddress = "false"
svga.vramSize = "4194304"
uuid.location = "56 4d 70 20 d5 25 a0 8f-76 7c 19 46 aa ed 40 9b"
virtualHW.productCompatibility = "hosted"
replay.supported = "FALSE"
sched.swap.derivedName =
"/vmfs/volumes/606147ee-7de1a2bf/58/disk.0/one-58-4a8b1028.vswp"
replay.filename = ""
scsi0:0.redo = ""
scsi0.pciSlotNumber = "16"
ethernet0.pciSlotNumber = "21"
-------------------------------------------------------------------------------------------------------------------------------------
Hi Marcin,
comments interspersed,
On Tue, Oct 16, 2012 at 1:25 PM, Marcin Jarzab<m...@agh.edu.pl> wrote:
Tino,
Applying raw 'devices' section creates two XML devices tags. This due the
implementation of 'core' vmware driver. :-)
That is ok.
I'm not sure about the exact problem but i'm getting following error:
-----------------------------------------------------------------------------------------------------------------------------------------------------
on Oct 15 09:37:43 2012 [LCM][I]: New VM state is BOOT
Mon Oct 15 09:37:43 2012 [VMM][I]: Generating deployment file:
/var/lib/one/52/deployment.0
Mon Oct 15 09:37:43 2012 [VMM][I]: ExitCode: 0
Mon Oct 15 09:37:43 2012 [VMM][I]: Successfully execute network driver
operation: pre.
Mon Oct 15 09:37:48 2012 [VMM][I]: Command execution fail:
/var/lib/one/remotes/vmm/vmware/deploy /var/lib/one/52/deployment.0
172.17.70.38 52 172.17.70.38
Mon Oct 15 09:37:48 2012 [VMM][E]: deploy: Error executing: virsh -c
'esx://172.17.70.38/?no_verify=1&auto_answer=1' define
/var/lib/one/52/deployment.0 err: ExitCode: 1
Mon Oct 15 09:37:48 2012 [VMM][I]: out:
Mon Oct 15 09:37:48 2012 [VMM][I]: error: Failed to define domain from
/var/lib/one/52/deployment.0
Mon Oct 15 09:37:48 2012 [VMM][I]: error: internal error Unknown driver name
'file'
---------------------------------------------------------------------------------------------------------------------------------------------------------
This may be related to bad default values. Could you check your
/etc/one/vmm_exec/vmm_exec_vmware.conf, and comment or erase the
following line
DISK = [ DRIVER = file ]
Regards,
-Tino
The driver 'file" is not related to vga anyway.
CPU="2"
DISK=[
BUS="scsi",
IMAGE="Win2K8r2-TD-Image-v4",
IMAGE_UNAME="oneadmin",
TARGET="sda" ]
GRAPHICS=[
LISTEN="0.0.0.0",
TYPE="vnc" ]
MEMORY="3024"
NAME="TD-Win2K8r2-VM-Template-vmxnet3"
NIC=[
MODEL="vmxnet3",
NETWORK="SBvNet-td-reserved1-210_220",
NETWORK_UNAME="oneadmin" ]
OS=[
ARCH="i686" ]
RAW=[
DATA="<devices><video><model type='vmvga'
vram='16384000'/></video></devices>",
TYPE="vmware" ]
TEMPLATE_ID="7"
VCPU="2"
Libvirt domain config:
-------------------------------------------------------------------------------------------------------------------------------------------
<domain type='vmware'>
<name>one-52</name>
<vcpu>2</vcpu>
<memory>3096576</memory>
<os>
<type arch='i686'>hvm</type>
</os>
<devices>
<disk type='file' device='disk'>
<source file='[0] 52/disk.0/disk.vmdk'/>
<target dev='sda' bus='scsi'/>
<driver name='file'/>
</disk>
<disk type='file' device='cdrom'>
<source file='[0] 52/disk.1.iso'/>
<target dev='hdb'/>
<readonly/>
</disk>
<interface type='bridge'>
<source bridge='usr-dsrg-td-reserved1'/>
<mac address='02:00:ac:11:4d:d4'/>
<model type='vmxnet3'/>
</interface>
<graphics type='vnc' listen='0.0.0.0' port='5952'/>
</devices>
<devices><video><model type='vmvga'
vram='16384000'/></video></devices>
</domain>
-------------------------------------------------------------------------------------------------------------------------------------------
Hi,
The translation is not performed by a script but rather the OpenNebula
core. What you are looking for resides in
src/vmm/LibVirtDriverVMware.cc in the source core.
Regards,
-Tino
--
Constantino Vázquez Blanco, MSc
Project Engineer
OpenNebula - The Open-Source Solution for Data Center Virtualization
www.OpenNebula.org | @tinova79 | @OpenNebula
On Wed, Sep 26, 2012 at 12:30 PM, Marcin Jarzab<m...@agh.edu.pl> wrote:
Tino,
Could you provide the information about the ONE script which is responsible
for translation of the input data
and creation of domain xml file? In case of problem I want to get into the
source code:-)
Hi Marcin,
The RAW attribute will instruct OpenNebula to pass the information
down to libvirt, and this is true also for the VMware drivers. I
haven't tried this myself, but I think libvrit should pass this
correctly to the ESX, and thus it should work. I would be interested
in knowing if you succeeded with a template including the RAW
attribute you pasted, changing KVM for VMWARE.
Regards,
-Tino
--
Constantino Vázquez Blanco, MSc
Project Engineer
OpenNebula - The Open-Source Solution for Data Center Virtualization
www.OpenNebula.org | @tinova79 | @OpenNebula
On Wed, Sep 26, 2012 at 12:47 AM, Marcin Jarzab<m...@agh.edu.pl> wrote:
Hello,
I'm getting such an error:
error: Failed to start domain one-41
Tue Sep 25 15:45:27 2012 [VMM][I]: error: internal error Could not start
domain: GenericVmConfigFault - Insufficient video RAM. The maximum
resolution of the virtual machine will be limited to 1176x885. To use the
configured maximum resolution of 2560x1600, increase the amount of video
RAM
allocated to this virtual machine by setting svga.vramSize="16384000" in
the
virtual machine's configuration file.
In "google" (http://www.digipedia.pl/usenet/thread/11667/7791/) I found
sth.
about the RAW section:
RAW = [ TYPE="KVM", DATA="<video><model type='cirrus' vram='16384'
heads='1'/><address type='pci' domain='0x0000' bus='0x00' slot='0x02'
function='0x0'/></video>"]
Does it work for vmware?
--
Ph.D. Eng. Marcin Jarzab
m...@agh.edu.pl
http://www.ics.agh.edu.pl/people/mj
Department of Computer Science
AGH University of Science and Technology
Kawiory 21, Building D17, 30-055 Krakow, POLAND
phone: +48 (12) 328 33 72
==========================================================================
_______________________________________________
Users mailing list
Users@lists.opennebula.org
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
--
Ph.D. Eng. Marcin Jarzab
m...@agh.edu.pl
http://www.ics.agh.edu.pl/people/mj
Department of Computer Science
AGH University of Science and Technology
Kawiory 21, Building D17, 30-055 Krakow, POLAND
phone: +48 (12) 328 33 72
==========================================================================
--
Ph.D. Eng. Marcin Jarzab
m...@agh.edu.pl
http://www.ics.agh.edu.pl/people/mj
Department of Computer Science
AGH University of Science and Technology
Kawiory 21, Building D17, 30-055 Krakow, POLAND
phone: +48 (12) 328 33 72
==========================================================================
--
Ph.D. Eng. Marcin Jarzab
m...@agh.edu.pl
http://www.ics.agh.edu.pl/people/mj
Department of Computer Science
AGH University of Science and Technology
Kawiory 21, Building D17, 30-055 Krakow, POLAND
phone: +48 (12) 328 33 72
==========================================================================
_______________________________________________
Users mailing list
Users@lists.opennebula.org
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
