Hello everybody.
We are testing Debian 7.0 Wheezy Xen 4.1.4 hypervisor using Opennebula
3.8.3 and we have found several deployment problems.
We added the host to the infrastructure and Sunstone seems to monitor it
correctly.
[InM][I]: Monitoring host xen-hv (14)
[InM][D]: Host 14 successfully monitored.
When we try to deploy a Xen VM, Opennebula creates the network bridge
correctly:
[TM][D]: Message received: TRANSFER SUCCESS 224 -
[VMM][D]: Message received: LOG I 224 pre: Executed "sudo /sbin/brctl
addbr br_test".
[VMM][D]: Message received: LOG I 224 pre: Executed "sudo /sbin/ip link
set br_test up".
[VMM][D]: Message received: LOG I 224 Device "eth1.4000" does not exist.
[VMM][D]: Message received: LOG I 224 pre: Executed "sudo /sbin/vconfig
add eth1 4000".
[VMM][D]: Message received: LOG I 224 pre: Executed "sudo /sbin/ip link
set eth1.4000 up".
[VMM][D]: Message received: LOG I 224 pre: Executed "sudo /sbin/brctl
addif br_test eth1.4000".
[VMM][D]: Message received: LOG I 224 ExitCode: 0
[VMM][D]: Message received: LOG I 224 Successfully execute network
driver operation: pre.
[VMM][D]: Message received: LOG D 224 deploy: Credits set to 128
[VMM][D]: Message received: LOG I 224 Error: Subcommand sched-cred not
found!
[VMM][D]: Message received: LOG E 224 deploy: Unable to set VM credits
[VMM][D]: Message received: LOG I 224 ExitCode: 0
[VMM][D]: Message received: LOG I 224 Successfully execute
virtualization driver operation: deploy.
Xen VM is launched and it boots correctly at the Xen 4.1.4 hypervisor.
We can access it using xm console.
However, Opennebula fails and returns the following error (VM is shown
as FAILED in Sunstone):
[VMM][D]: Message received: LOG I 224 Command execution fail:
/var/lib/one/remotes/vnm/802.1Q/post ---XXXbase64codeXXX--- Usage: xm
<subcommand> [args]
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 Control, list, and manipulate Xen
guest instances.
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 Common 'xm' commands:
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 console Attach to
<Domain>'s console.
[VMM][D]: Message received: LOG I 224 vncviewer Attach to
<Domain>'s VNC server.
[VMM][D]: Message received: LOG I 224 create Create a
domain based on <ConfigFile>.
[VMM][D]: Message received: LOG I 224 new Adds a domain
to Xend domain management
[VMM][D]: Message received: LOG I 224 delete Remove a
domain from Xend domain management.
[VMM][D]: Message received: LOG I 224 destroy Terminate a
domain immediately.
[VMM][D]: Message received: LOG I 224 dump-core Dump core for
a specific domain.
[VMM][D]: Message received: LOG I 224 help Display this
message.
[VMM][D]: Message received: LOG I 224 list List
information about all/some domains.
[VMM][D]: Message received: LOG I 224 mem-set Set the
current memory usage for a domain.
[VMM][D]: Message received: LOG I 224 migrate Migrate a
domain to another machine.
[VMM][D]: Message received: LOG I 224 pause Pause
execution of a domain.
[VMM][D]: Message received: LOG I 224 reboot Reboot a domain.
[VMM][D]: Message received: LOG I 224 reset Reset a domain.
[VMM][D]: Message received: LOG I 224 restore Restore a
domain from a saved state.
[VMM][D]: Message received: LOG I 224 resume Resume a Xend
managed domain
[VMM][D]: Message received: LOG I 224 save Save a domain
state to restore later.
[VMM][D]: Message received: LOG I 224 shell Launch an
interactive shell.
[VMM][D]: Message received: LOG I 224 shutdown Shutdown a
domain.
[VMM][D]: Message received: LOG I 224 start Start a Xend
managed domain
[VMM][D]: Message received: LOG I 224 suspend Suspend a
Xend managed domain
[VMM][D]: Message received: LOG I 224 top Monitor a
host and the domains in real time.
[VMM][D]: Message received: LOG I 224 unpause Unpause a
paused domain.
[VMM][D]: Message received: LOG I 224 uptime Print uptime
for all/some domains.
[VMM][D]: Message received: LOG I 224 usb-add Add the usb
device to FV VM.
[VMM][D]: Message received: LOG I 224 usb-del Delete the
usb device to FV VM.
[VMM][D]: Message received: LOG I 224 domstate get the state
of a domain
[VMM][D]: Message received: LOG I 224 vcpu-set Set the
number of active VCPUs for allowed for
[VMM][D]: Message received: LOG I 224 the domain.
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 <Domain> can either be the Domain
Name or Id.
[VMM][D]: Message received: LOG I 224 For more help on 'xm' see the
xm(1) man page.
[VMM][D]: Message received: LOG I 224 For more help on 'xm create' see
the xmdomain.cfg(5) man page.
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 For a complete list of subcommands
run 'xm help'.
[VMM][D]: Message received: LOG I 224 one-224
*[VMM][D]: Message received: LOG I 224 bash: lÃnea: error sintáctico
cerca del elemento inesperado `('*
[VMM][D]: Message received: LOG I 224 bash: lÃnea:
`(/var/lib/one/remotes/vnm/802.1Q/post ---XXXbase64codeXXX--- Usage: xm
<subcommand> [args]Control, list, and manipulate Xen guest
instances.Common 'xm' commands: console Attach to
<Domain>'s console. vncviewer Attach to
<Domain>'s VNC server. create Create a
domain based on <ConfigFile>. new Adds a
domain to Xend domain management delete Remove
a domain from Xend domain management. destroy
Terminate a domain immediately. dump-core
Dump core for a specific domain. help
Display this message. list
List information about all/some domains. mem-set
Set the current memory usage for a domain. migrate
Migrate a domain to another machine. pause
Pause execution of a domain. reboot
Reboot a domain. reset
Reset a domain. restore
Restore a domain from a saved state. resume
Resume a Xend managed domain save
Save a domain state to restore later. shell
Launch an interactive shell. shutdown
Shutdown a domain. start
Start a Xend managed domain suspend
Suspend a Xend managed domain top
Monitor a host and the domains in real time. unpause
Unpause a paused domain. uptime
Print uptime for all/some domains. usb-add
Add the usb device to FV VM. usb-del
Delete the usb device to FV VM. domstate
get the state of a domain vcpu-set
Set the number of active VCPUs for allowed for *the domain.<Domain> can
either be the Domain Name or Id.For more help on 'xm' see the xm(1) man
page.For more help on 'xm create' see the xmdomain.cfg(5) man page.For
a complete list of subcommands run 'xm help'.one-224); echo "ExitCode:
$? EOF_ERR" 1>&2; echo "EOF_OUT"'*
[VMM][D]: Message received: LOG I 224 ExitSSHCode: 2
[VMM][D]: Message received: LOG E 224 Error connecting to xen-hv
[VMM][D]: Message received: LOG I 224 Command execution fail:
/var/lib/one/remotes/vmm/xen/cancel Usage: xm <subcommand> [args]
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 Control, list, and manipulate Xen
guest instances.
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 Common 'xm' commands:
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 console Attach to
<Domain>'s console.
[VMM][D]: Message received: LOG I 224 vncviewer Attach to
<Domain>'s VNC server.
[VMM][D]: Message received: LOG I 224 create Create a
domain based on <ConfigFile>.
[VMM][D]: Message received: LOG I 224 new Adds a domain
to Xend domain management
[VMM][D]: Message received: LOG I 224 delete Remove a
domain from Xend domain management.
[VMM][D]: Message received: LOG I 224 destroy Terminate a
domain immediately.
[VMM][D]: Message received: LOG I 224 dump-core Dump core for
a specific domain.
[VMM][D]: Message received: LOG I 224 help Display this
message.
[VMM][D]: Message received: LOG I 224 list List
information about all/some domains.
[VMM][D]: Message received: LOG I 224 mem-set Set the
current memory usage for a domain.
[VMM][D]: Message received: LOG I 224 migrate Migrate a
domain to another machine.
[VMM][D]: Message received: LOG I 224 pause Pause
execution of a domain.
[VMM][D]: Message received: LOG I 224 reboot Reboot a domain.
[VMM][D]: Message received: LOG I 224 reset Reset a domain.
[VMM][D]: Message received: LOG I 224 restore Restore a
domain from a saved state.
[VMM][D]: Message received: LOG I 224 resume Resume a Xend
managed domain
[VMM][D]: Message received: LOG I 224 save Save a domain
state to restore later.
[VMM][D]: Message received: LOG I 224 shell Launch an
interactive shell.
[VMM][D]: Message received: LOG I 224 shutdown Shutdown a
domain.
[VMM][D]: Message received: LOG I 224 start Start a Xend
managed domain
[VMM][D]: Message received: LOG I 224 suspend Suspend a
Xend managed domain
[VMM][D]: Message received: LOG I 224 top Monitor a
host and the domains in real time.
[VMM][D]: Message received: LOG I 224 unpause Unpause a
paused domain.
[VMM][D]: Message received: LOG I 224 uptime Print uptime
for all/some domains.
[VMM][D]: Message received: LOG I 224 usb-add Add the usb
device to FV VM.
[VMM][D]: Message received: LOG I 224 usb-del Delete the
usb device to FV VM.
[VMM][D]: Message received: LOG I 224 domstate get the state
of a domain
[VMM][D]: Message received: LOG I 224 vcpu-set Set the
number of active VCPUs for allowed for
[VMM][D]: Message received: LOG I 224 the domain.
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 <Domain> can either be the Domain
Name or Id.
[VMM][D]: Message received: LOG I 224 For more help on 'xm' see the
xm(1) man page.
[VMM][D]: Message received: LOG I 224 For more help on 'xm create' see
the xmdomain.cfg(5) man page.
[VMM][D]: Message received: LOG I 224
[VMM][D]: Message received: LOG I 224 For a complete list of subcommands
run 'xm help'.
[VMM][D]: Message received: LOG I 224 one-224 xen-hv 224 xen-hv
*[VMM][D]: Message received: LOG I 224 bash: lÃnea: error sintáctico
cerca del elemento inesperado `('
[VMM][D]: Message received: LOG I 224 bash: lÃnea:
`(/var/lib/one/remotes/vnm/802.1Q/post
*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
Usage: xm <subcommand> [args]Control, list, and manipulate Xen guest
instances.Common 'xm' commands: console Attach to
<Domain>'s console. vncviewer Attach to
<Domain>'s VNC server. create Create a
domain based on <ConfigFile>. new Adds a
domain to Xend domain management delete Remove
a domain from Xend domain management. destroy
Terminate a domain immediately. dump-core
Dump core for a specific domain. help
Display this message. list
List information about all/some domains. mem-set
Set the current memory usage for a domain. migrate
Migrate a domain to another machine. pause
Pause execution of a domain. reboot
Reboot a domain. reset
Reset a domain. restore
Restore a domain from a saved state. resume
Resume a Xend managed domain save
Save a domain state to restore later. shell
Launch an interactive shell. shutdown
Shutdown a domain. start
Start a Xend managed domain suspend
Suspend a Xend managed domain top
Monitor a host and the domains in real time. unpause
Unpause a paused domain. uptime
Print uptime for all/some domains. usb-add
Add the usb device to FV VM. usb-del
Delete the usb device to FV VM. domstate
get the state of a domain vcpu-set
Set the number of active VCPUs for allowed for *the domain.<Domain> can
either be the Domain Name or Id.For more help on 'xm' see the xm(1) man
page.For more help on 'xm create' see the xmdomain.cfg(5) man page.For
a complete list of subcommands run 'xm help'.one-224); echo "ExitCode:
$? EOF_ERR" 1>&2; echo "EOF_OUT"'*
[VMM][D]: Message received: LOG I 224 ExitSSHCode: 2
[VMM][D]: Message received: LOG E 224 Error connecting to xen-hv
[VMM][D]: Message received: LOG I 224 Failed to execute virtualization
driver operation: cancel.
[VMM][D]: Message received: LOG I 224 Failed to execute network driver
operation: post.
[VMM][D]: Message received: DEPLOY FAILURE 224 Error connecting to xen-hv
We are using OpenNebula 3.8.3 without problems using Debian 6.0.7
Squeeze and Xen 4.0.1.
Please, can you help us?
Best Regards,
Alberto Picón
:
_______________________________________________
Users mailing list
[email protected]
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
