Sorry to ask you this basic question, but, what exactly do you mean by When upgrade my first test installation from 4.0 à 4.2 it changed those > definitions from /vmfs/voluems to /var/lib/one/datastore
Do you mean that before the upgrade you did "onedatastore show <id>|grep BASE_PATH" and it pointed to /vmfs/volumes and after the upgrade the output was /var/lib/one/datastores ?? That shouldn't be happening at all. On Wed, Aug 14, 2013 at 8:14 AM, Michael Curran < [email protected]> wrote: > The problem is – when I installed ON4.0 – I was able to re-direct the > datastores to the /vmfs/volumes instead of /var/lib/one/datastores **** > > ** ** > > So my system (0) and images (1) datastores did not have to be re-recreated > **** > > ** ** > > When upgrade my first test installation from 4.0 à 4.2 it changed those > definitions from /vmfs/voluems to /var/lib/one/datastores and I had to > create my own datastores because they were not customizable by me**** > > ** ** > > Originally thought it was part of the upgrade process – however when I > built a clean installation of 4.2 I ran into the same problem 0/1/2 > datastores all expect ONLY local volumes to the ON node and I had to create > my own datastores for the cluster I built.**** > > ** ** > > I would expect that I should be able to do one of the following**** > > ** ** > > **n **Delete and recreate the 0/1/2 datastores for use as VMFS volumes > instead of locally mounted datastores**** > > **n **Modify or change those datastore definitions from locally mounted > directories to vmfs mounts (which is what I set in the oned.conf file, and > is adopted by the datastores)**** > > ** ** > > Michael Curran | connectsolutions | Lead Network Architect**** > > Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com**** > > ** ** > > *From:* Jaime Melis [mailto:[email protected]] > *Sent:* Tuesday, August 13, 2013 5:36 PM > > *To:* Michael Curran > *Cc:* [email protected] > *Subject:* Re: [one-users] Datastores**** > > ** ** > > Hi Michael,**** > > ** ** > > would you care to explain the problem again? we don't quite understand > what might be the issue. Do you have any further comments on the matter?** > ** > > ** ** > > regards,**** > > Jaime**** > > ** ** > > On Thu, Aug 8, 2013 at 12:44 PM, Michael Curran < > [email protected]> wrote:**** > > An update to this –**** > > **** > > I ran into the same issue with the DS names, before creating them myself – > and they only point locally**** > > **** > > I’ve created the system/images DS’s on my ESXi hosts as 102/103 – and > working on getting them to monitor **** > > **** > > So far just get errors if I run > /var/lib/one/remotes/datastore/vmfs/monitor **** > > **** > > Are they any options at the end of monitor?**** > > **** > > **** > > Michael Curran | connectsolutions | Lead Network Architect**** > > Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com**** > > **** > > *From:* Ruben S. Montero [mailto:[email protected]] > *Sent:* Thursday, July 25, 2013 12:55 PM**** > > > *To:* Michael Curran > *Cc:* [email protected] > *Subject:* Re: [one-users] Datastores**** > > **** > > Ok Thanks. We've been looking at the upgrade process and it should not > modify the base path of the datastores....**** > > **** > > **** > > Cheers**** > > **** > > Ruben**** > > **** > > On Thu, Jul 25, 2013 at 6:21 PM, Michael Curran < > [email protected]> wrote:**** > > Okay – I re-created the images DS from the Sunstone GUI and when I > uploaded an image it now captures the right size – bug report maybe? I’ll > find out tomorrow when I transfer this to our DC lab machines from our > office labs on a clean build**** > > **** > > Michael Curran | connectsolutions | Lead Network Architect**** > > Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com**** > > **** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Michael Curran > *Sent:* Thursday, July 25, 2013 11:26 AM > *To:* [email protected]**** > > > *Cc:* [email protected] > *Subject:* Re: [one-users] Datastores**** > > **** > > The problem exists because when I upgrade from 4.0.1 à 4.1.80 it > recreated the images datastore with a path of /var/lib/one/datastores/1 and > since I am on vmfs – it should be /vmfs/volumes/1**** > > **** > > Is there a way to modify that path? Or will I have to re-create the > datastore in OpenNebula and then rename the datastore?**** > > **** > > Michael Curran | connectsolutions | Lead Network Architect**** > > Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com**** > > **** > > *From:* Michael Curran > *Sent:* Thursday, July 25, 2013 9:06 AM > *To:* [email protected]; Michael Curran > *Cc:* [email protected] > *Subject:* RE: [one-users] Datastores**** > > **** > > What does the monitor command look like from the CLI ? My logs only show > successful response, not what it ran to check > > But your right, if I do a list on the datastores - my system/images sore > zero or nothing...so that's my issue > > Sent from my Android phone using TouchDown (www.nitrodesk.com) > > -----Original Message----- > *From:* Michael Curran [[email protected]] > *Received:* Wednesday, 24 Jul 2013, 2:23pm > *To:* Ruben S. Montero [[email protected]] > *CC:* [email protected] [[email protected]] > *Subject:* Re: [one-users] Datastores**** > > Ive been on the datastores – I will check the monitor data since that > makes the most sense – something must be amiss there **** > > **** > > My test env has 2 1tb volumes with one image and 2 running VM’s – neither > is more than 2% used**** > > **** > > So monitoring seems the likelier culprit – Ill investigate that piece.**** > > **** > > Michael Curran | connectsolutions | Lead Network Architect**** > > Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com**** > > **** > > *From:* Ruben S. Montero > [mailto:[email protected]<[email protected]>] > > *Sent:* Wednesday, July 24, 2013 1:04 PM > *To:* Michael Curran > *Cc:* [email protected] > *Subject:* Re: [one-users] Datastores**** > > **** > > This error is because of the space left in the datastore. Can you check > that datastores are being monitor, and capacity data is get without errors? > Are there any error or message relative to monitor datastores in oned.log? > What is the size available/total shown in onedatastore show ?**** > > **** > > Cheers**** > > **** > > Ruben**** > > **** > > On Wed, Jul 24, 2013 at 5:30 PM, Michael Curran < > [email protected]> wrote:**** > > Can the images DS and the filestore DS be the same physical volume? Or > must they be 2 separate volumes?**** > > **** > > When I try to upload files to the images DS – I get **** > > **** > > Req:752 UID:0 ImageAllocate result FAILURE Not enough space in datastore** > ** > > **** > > I also tested images files – and I get the same error**** > > **** > > I logged into the ESX host and made my way to the images datastore in > /vmfs/volumes/1 – and as oneadmin (ssh , no passwd) I am able to create and > remove files within the datastore itself**** > > **** > > p.s. – commands also fail the same way via CLI and oneimage command**** > > **** > > Michael Curran | connectsolutions | Lead Network Architect**** > > Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com**** > > **** > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org**** > > > > **** > > **** > > -- **** > > -- **** > > Join us at OpenNebulaConf2013 in Berlin, 24-26 September, 2013**** > > -- **** > > Ruben S. Montero, PhD > Project co-Lead and Chief Architect > OpenNebula - The Open Source Solution for Data Center Virtualization > www.OpenNebula.org | [email protected] | @OpenNebula**** > > > > **** > > **** > > -- **** > > -- **** > > Join us at OpenNebulaConf2013 in Berlin, 24-26 September, 2013**** > > -- **** > > Ruben S. Montero, PhD > Project co-Lead and Chief Architect > OpenNebula - The Open Source Solution for Data Center Virtualization > www.OpenNebula.org | [email protected] | @OpenNebula**** > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org**** > > > > **** > > ** ** > > -- **** > > Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> in > Berlin, 24-26 September, 2013 > --**** > > Jaime Melis > Project Engineer > OpenNebula - The Open Source Toolkit for Cloud Computing > www.OpenNebula.org | [email protected]**** > -- Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> in Berlin, 24-26 September, 2013 -- Jaime Melis Project Engineer OpenNebula - The Open Source Toolkit for Cloud Computing www.OpenNebula.org | [email protected]
_______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
