Sent from my LG Mobile
[email protected] wrote: Send Users mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://lists.opennebula.org/listinfo.cgi/users-opennebula.org or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Re: vmware and scsi disk setup (Tino Vazquez) 2. Re: vmware and scsi disk setup (Michael Curran) 3. vnc grep (hansz) 4. Re: opennebula + esxi 5.1 (Michael Curran) ---------------------------------------------------------------------- Message: 1 Date: Thu, 22 Aug 2013 11:05:00 +0200 From: Tino Vazquez <[email protected]> To: Michael Curran <[email protected]> Cc: "[email protected]" <[email protected]> Subject: Re: [one-users] vmware and scsi disk setup Message-ID: <cahfkwc3ch6wr78cvnke4linkqdvhjffs5ql+el28cezv3pv...@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Hi Michael, At first sight, it looks like the first .vmx refers to a VM with a SCSI SAS disk, while the second uses a LSI logic driver for it. Does changing the second VM to use a lsisas driver work? Regards, -Tino -- Constantino V?zquez Blanco, PhD, MSc Senior Infrastructure Architect at C12G Labs www.c12g.com | @C12G | es.linkedin.com/in/tinova -- Confidentiality Warning: The information contained in this e-mail and any accompanying documents, unless otherwise expressly indicated, is confidential and privileged, and is intended solely for the person and/or entity to whom it is addressed (i.e. those identified in the "To" and "cc" box). They are the property of C12G Labs S.L.. Unauthorized distribution, review, use, disclosure, or copying of this communication, or any part thereof, is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify us immediately by e-mail at [email protected] and delete the e-mail and attachments and any copy from your system. C12G thanks you for your cooperation. On Wed, Aug 21, 2013 at 7:21 PM, Michael Curran <[email protected]> wrote: > So -- the issue is I have a windows VM in ESXi that is currently installed > and runs fine with SCSI disks set -- but when I deploy it with OpenNebula , > windows boots in recovery mode because of a suspected change in hardware > > This is scsi is identified in the VMX file, by VMWare > > scsi0.present = "true" > scsi0.sharedBus = "none" > scsi0.virtualDev = "lsisas1068" > scsi0:0.present = "true" > scsi0:0.fileName = "Vanilla-w2k8r2.vmdk" > scsi0:0.deviceType = "scsi-hardDisk" > sched.scsi0:0.shares = "normal" > sched.scsi0:0.throughputCap = "off" > scsi0:0.redo = "" > scsi0.pciSlotNumber = "160" > scsi0.sasWWID = "50 05 05 66 41 49 80 90" > > > This is how the SCSI device is created in VMX, by OpenNebula (not sure why it > creates the VM with a snapshot diskname, and not just disk.vmdk) > > scsi0.present = "true" > scsi0.virtualDev = "lsilogic" > scsi0:0.present = "true" > scsi0:0.deviceType = "scsi-hardDisk" > scsi0:0.fileName = "disk-000001.vmdk" > scsi0.pciSlotNumber = "-1" > scsi0:0.redo = "" > > There appears to be several fields missing > > Michael Curran | connectsolutions | Lead Network Architect > Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com > > -----Original Message----- > From: Tino Vazquez [mailto:[email protected]] > Sent: Wednesday, August 21, 2013 6:28 AM > To: Michael Curran > Cc: [email protected] > Subject: Re: [one-users] vmware and scsi disk setup > > Hi Michael, > > The SCSI configuration of a disk is better left our to OpenNebula, rather > than setting it manually. Could you try setting a disk like: > > DISK=[IMAGE_ID="0", DEV_PREFIX="sd"] > > and remove the DATA_VMX field altogether (although keeping the DATA field)? > > Best regards, > > -Tino > -- > Constantino V?zquez Blanco, PhD, MSc > Senior Infrastructure Architect at C12G Labs www.c12g.com | @C12G | > es.linkedin.com/in/tinova > > -- > Confidentiality Warning: The information contained in this e-mail and any > accompanying documents, unless otherwise expressly indicated, is confidential > and privileged, and is intended solely for the person and/or entity to whom > it is addressed (i.e. those identified in the "To" and "cc" box). They are > the property of C12G Labs S.L.. > Unauthorized distribution, review, use, disclosure, or copying of this > communication, or any part thereof, is strictly prohibited and may be > unlawful. If you have received this e-mail in error, please notify us > immediately by e-mail at [email protected] and delete the e-mail and attachments > and any copy from your system. C12G thanks you for your cooperation. > > > On Tue, Aug 20, 2013 at 6:54 PM, Michael Curran > <[email protected]> wrote: >> I am trying to get my windows hosts to deploy with SCSI devices >> instead of IDE >> >> >> >> I have modified the disk type to be SD instead of HD - and it starts >> up with SCSI now , however I don't think its building the VMX file >> correctly as I get this error >> >> >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: out: >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: error: Failed to start domain >> one-24 >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: error: internal error Could not >> start >> domain: GenericVmConfigFault - >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: Failed to configure scsi0. >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: ExitCode: 1 >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: Failed to execute virtualization >> driver >> operation: deploy. >> >> Tue Aug 20 09:44:08 2013 [VMM][E]: Error deploying virtual machine >> >> Tue Aug 20 09:44:08 2013 [DiM][I]: New VM state is FAILED >> >> >> >> >> >> I have tried setting the RAW settings for SCSI env. In the VMX file, >> but it puts the disk name before it finds if the SCSI device is present. >> >> >> >> scsi0:0.fileName = >> "/vmfs/volumes/51ff8fa7-5a076f91-1cb4-b499bac14752/24/disk.0/disk.vmdk" >> >> scsi0.present = "true" >> >> scsi0.sharedBus = "none" >> >> scsi0.virtualDev = "lsisas1068" >> >> scsi0:0.present = "true " >> >> scsi0:0.deviceType = "scsi-hardDisk" >> >> sched.scsi0:0.shares = "normal" >> >> sched.scsi0:0.throughputCap = "off" >> >> scsi0.pciSlotNumber = "21" >> >> scsi0.sasWWID = "50 05 05 60 ed 9f 4c 80" >> >> >> >> Are there any recommended best practices for this type of setup? Here >> is what my template looks like >> >> >> >> TEMPLATE 0 INFORMATION >> >> ID : 0 >> >> NAME : Windows 2k8r2 >> >> USER : oneadmin >> >> GROUP : oneadmin >> >> REGISTER TIME : 08/08 12:16:50 >> >> >> >> PERMISSIONS >> >> OWNER : um- >> >> GROUP : --- >> >> OTHER : --- >> >> >> >> TEMPLATE CONTENTS >> >> CONTEXT=[ >> >> NETWORK="YES" ] >> >> CPU="1" >> >> DISK=[ >> >> IMAGE_ID="0" ] >> >> FEATURES=[ >> >> PCIBRIDGE="0" ] >> >> MEMORY="2048" >> >> NIC=[ >> >> MODEL="e1000", >> >> NETWORK_ID="0" ] >> >> OS=[ >> >> GUESTOS="windows7Server64Guest" ] >> >> RAW=[ >> >> DATA="<devices><controller type='scsi' index='0' >> model='lsilogic'/></devices>", >> >> TYPE="vmware" ] >> >> RAW=[ >> >> DATA_VMX="scsi0.present = \"true\"\nscsi0.sharedBus = >> \"none\"\nscsi0.virtualDev = \"lsisas1068\"\nscsi0:0.present = \"true >> \"\nscsi0:0.deviceType = \"scsi-hardDisk\"\nsched.scsi0:0.shares = >> \"normal\"\nsched.scsi0:0.throughputCap = \"off\"\nscsi0.pciSlotNumber >> = \"160\"", >> >> TYPE="vmware" ] >> >> REQUIREMENTS="ID=\"0\" | ID=\"1\"" >> >> >> >> >> >> >> >> Michael Curran | connectsolutions | Lead Network Architect >> >> Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com >> >> >> >> >> _______________________________________________ >> Users mailing list >> [email protected] >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >> > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org ------------------------------ Message: 2 Date: Thu, 22 Aug 2013 10:02:05 +0000 From: Michael Curran <[email protected]> To: Tino Vazquez <[email protected]> Cc: "[email protected]" <[email protected]> Subject: Re: [one-users] vmware and scsi disk setup Message-ID: <5543a30027d64646956e930105530...@bl2pr04mb131.namprd04.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" Uniquely enough if I look at the VMDK driver ddb.adapterType , they both state lsilogic The VMX file is being created using the lsilogic definition by opennebula. So there must be something different being done by VMware -- I will try to set the following in data_vmx and see if that will work scsi0.virtualDev = "lsisas1068" Michael Curran | connectsolutions | Lead Network Architect Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com -----Original Message----- From: Tino Vazquez [mailto:[email protected]] Sent: Thursday, August 22, 2013 5:05 AM To: Michael Curran Cc: [email protected] Subject: Re: [one-users] vmware and scsi disk setup Hi Michael, At first sight, it looks like the first .vmx refers to a VM with a SCSI SAS disk, while the second uses a LSI logic driver for it. Does changing the second VM to use a lsisas driver work? Regards, -Tino -- Constantino V?zquez Blanco, PhD, MSc Senior Infrastructure Architect at C12G Labs www.c12g.com | @C12G | es.linkedin.com/in/tinova -- Confidentiality Warning: The information contained in this e-mail and any accompanying documents, unless otherwise expressly indicated, is confidential and privileged, and is intended solely for the person and/or entity to whom it is addressed (i.e. those identified in the "To" and "cc" box). They are the property of C12G Labs S.L.. Unauthorized distribution, review, use, disclosure, or copying of this communication, or any part thereof, is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify us immediately by e-mail at [email protected] and delete the e-mail and attachments and any copy from your system. C12G thanks you for your cooperation. On Wed, Aug 21, 2013 at 7:21 PM, Michael Curran <[email protected]> wrote: > So -- the issue is I have a windows VM in ESXi that is currently > installed and runs fine with SCSI disks set -- but when I deploy it > with OpenNebula , windows boots in recovery mode because of a > suspected change in hardware > > This is scsi is identified in the VMX file, by VMWare > > scsi0.present = "true" > scsi0.sharedBus = "none" > scsi0.virtualDev = "lsisas1068" > scsi0:0.present = "true" > scsi0:0.fileName = "Vanilla-w2k8r2.vmdk" > scsi0:0.deviceType = "scsi-hardDisk" > sched.scsi0:0.shares = "normal" > sched.scsi0:0.throughputCap = "off" > scsi0:0.redo = "" > scsi0.pciSlotNumber = "160" > scsi0.sasWWID = "50 05 05 66 41 49 80 90" > > > This is how the SCSI device is created in VMX, by OpenNebula (not sure > why it creates the VM with a snapshot diskname, and not just > disk.vmdk) > > scsi0.present = "true" > scsi0.virtualDev = "lsilogic" > scsi0:0.present = "true" > scsi0:0.deviceType = "scsi-hardDisk" > scsi0:0.fileName = "disk-000001.vmdk" > scsi0.pciSlotNumber = "-1" > scsi0:0.redo = "" > > There appears to be several fields missing > > Michael Curran | connectsolutions | Lead Network Architect Phone > 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com > > -----Original Message----- > From: Tino Vazquez [mailto:[email protected]] > Sent: Wednesday, August 21, 2013 6:28 AM > To: Michael Curran > Cc: [email protected] > Subject: Re: [one-users] vmware and scsi disk setup > > Hi Michael, > > The SCSI configuration of a disk is better left our to OpenNebula, rather > than setting it manually. Could you try setting a disk like: > > DISK=[IMAGE_ID="0", DEV_PREFIX="sd"] > > and remove the DATA_VMX field altogether (although keeping the DATA field)? > > Best regards, > > -Tino > -- > Constantino V?zquez Blanco, PhD, MSc > Senior Infrastructure Architect at C12G Labs www.c12g.com | @C12G | > es.linkedin.com/in/tinova > > -- > Confidentiality Warning: The information contained in this e-mail and any > accompanying documents, unless otherwise expressly indicated, is confidential > and privileged, and is intended solely for the person and/or entity to whom > it is addressed (i.e. those identified in the "To" and "cc" box). They are > the property of C12G Labs S.L.. > Unauthorized distribution, review, use, disclosure, or copying of this > communication, or any part thereof, is strictly prohibited and may be > unlawful. If you have received this e-mail in error, please notify us > immediately by e-mail at [email protected] and delete the e-mail and attachments > and any copy from your system. C12G thanks you for your cooperation. > > > On Tue, Aug 20, 2013 at 6:54 PM, Michael Curran > <[email protected]> wrote: >> I am trying to get my windows hosts to deploy with SCSI devices >> instead of IDE >> >> >> >> I have modified the disk type to be SD instead of HD - and it starts >> up with SCSI now , however I don't think its building the VMX file >> correctly as I get this error >> >> >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: out: >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: error: Failed to start domain >> one-24 >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: error: internal error Could not >> start >> domain: GenericVmConfigFault - >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: Failed to configure scsi0. >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: ExitCode: 1 >> >> Tue Aug 20 09:44:08 2013 [VMM][I]: Failed to execute virtualization >> driver >> operation: deploy. >> >> Tue Aug 20 09:44:08 2013 [VMM][E]: Error deploying virtual machine >> >> Tue Aug 20 09:44:08 2013 [DiM][I]: New VM state is FAILED >> >> >> >> >> >> I have tried setting the RAW settings for SCSI env. In the VMX file, >> but it puts the disk name before it finds if the SCSI device is present. >> >> >> >> scsi0:0.fileName = >> "/vmfs/volumes/51ff8fa7-5a076f91-1cb4-b499bac14752/24/disk.0/disk.vmdk" >> >> scsi0.present = "true" >> >> scsi0.sharedBus = "none" >> >> scsi0.virtualDev = "lsisas1068" >> >> scsi0:0.present = "true " >> >> scsi0:0.deviceType = "scsi-hardDisk" >> >> sched.scsi0:0.shares = "normal" >> >> sched.scsi0:0.throughputCap = "off" >> >> scsi0.pciSlotNumber = "21" >> >> scsi0.sasWWID = "50 05 05 60 ed 9f 4c 80" >> >> >> >> Are there any recommended best practices for this type of setup? Here >> is what my template looks like >> >> >> >> TEMPLATE 0 INFORMATION >> >> ID : 0 >> >> NAME : Windows 2k8r2 >> >> USER : oneadmin >> >> GROUP : oneadmin >> >> REGISTER TIME : 08/08 12:16:50 >> >> >> >> PERMISSIONS >> >> OWNER : um- >> >> GROUP : --- >> >> OTHER : --- >> >> >> >> TEMPLATE CONTENTS >> >> CONTEXT=[ >> >> NETWORK="YES" ] >> >> CPU="1" >> >> DISK=[ >> >> IMAGE_ID="0" ] >> >> FEATURES=[ >> >> PCIBRIDGE="0" ] >> >> MEMORY="2048" >> >> NIC=[ >> >> MODEL="e1000", >> >> NETWORK_ID="0" ] >> >> OS=[ >> >> GUESTOS="windows7Server64Guest" ] >> >> RAW=[ >> >> DATA="<devices><controller type='scsi' index='0' >> model='lsilogic'/></devices>", >> >> TYPE="vmware" ] >> >> RAW=[ >> >> DATA_VMX="scsi0.present = \"true\"\nscsi0.sharedBus = >> \"none\"\nscsi0.virtualDev = \"lsisas1068\"\nscsi0:0.present = \"true >> \"\nscsi0:0.deviceType = \"scsi-hardDisk\"\nsched.scsi0:0.shares = >> \"normal\"\nsched.scsi0:0.throughputCap = >> \"off\"\nscsi0.pciSlotNumber = \"160\"", >> >> TYPE="vmware" ] >> >> REQUIREMENTS="ID=\"0\" | ID=\"1\"" >> >> >> >> >> >> >> >> Michael Curran | connectsolutions | Lead Network Architect >> >> Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com >> >> >> >> >> _______________________________________________ >> Users mailing list >> [email protected] >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >> > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org ------------------------------ Message: 3 Date: Thu, 22 Aug 2013 18:12:25 +0800 (CST) From: hansz <[email protected]> To: [email protected] Subject: [one-users] vnc grep Message-ID: <[email protected]> Content-Type: text/plain; charset="gbk" centos 6.4 +opennebula 4.2 (1)now in my opennebula i can see vnc ,but the clour is grep ,if i click it ?can show an window ?but it is blank ,and i can see VNC Server disconnection(code 1006) (2)i am sure i install the novnc ,python-setuptools,python-websockify rpm package. i also set the language english. (3) this is the nonvc.log 190 I, [2013-08-22T16:00:03.567586 #9629] INFO -- : Killing VNC proxy 191 I, [2013-08-22T16:00:04.589507 #9629] INFO -- : Deleting stale lock file 192 I, [2013-08-22T16:00:04.841151 #9656] INFO -- : Starting VNC proxy: python /usr/share/one/websockify/websocketproxy.py --target-config=/var/lib/one/sunstone_vnc_tokens 29876 193 WARNING: no 'numpy' module, HyBi protocol is slower or disabled 194 WebSocket server settings: 195 - Listen on :29876 196 - Flash security policy server 197 - No SSL/TLS support (no cert file) 198 - proxying from :29876 to targets in /var/lib/one/sunstone_vnc_tokens 199 200 1: 10.24.12.132: SSL connection but '/root/self.pem' not found -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130822/1a17900f/attachment-0001.htm> ------------------------------ Message: 4 Date: Thu, 22 Aug 2013 10:46:25 +0000 From: Michael Curran <[email protected]> To: hansz <[email protected]>, "[email protected]" <[email protected]> Subject: Re: [one-users] opennebula + esxi 5.1 Message-ID: <f8b60f8d8b354c88a27f4cab5e2c7...@bl2pr04mb131.namprd04.prod.outlook.com> Content-Type: text/plain; charset="iso-2022-jp" What kind of issues are you having - hard to help without understanding what your errors are. Michael Curran | connectsolutions | Lead Network Architect Phone 614.568.2285 | Mobile 614.403.6320 | www.connectsolutions.com<http://www.connectsolutions.com> From: [email protected] [mailto:[email protected]] On Behalf Of hansz Sent: Thursday, August 22, 2013 4:24 AM To: [email protected] Subject: [one-users] opennebula + esxi 5.1 i have already do this test for 2 weeks, but no one successful , could you give me some help, how to make it work, pls give some more detail steps?ok? I use centos 6.4 and opennebula ?when i install my centos6.4 os i only select desktop. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130822/703dea68/attachment.htm> ------------------------------ _______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org End of Users Digest, Vol 66, Issue 76 ************************************* NOTICE: Protect the information in this message in accordance with the company's security policies. If you received this message in error, immediately notify the sender and destroy all copies. _______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
