Hi, I think you should just configure your networking to use a single bridge 'br0' created with openvswitch. I don't really get why you need br10?
cheers, Jaime On Thu, Sep 5, 2013 at 1:09 PM, [email protected] <[email protected]>wrote: > thx man for reply :) > > hmm. u mean, I'm creating br0 from */etc/network/interfaces* ? that's my > config > > > iface p5p1 inet manual > pre-up ifconfig $IFACE up > pre-down ifconfig $IFACE down > auto br0 > iface br0 inet static > address 172.20.0.14 > network 172.20.0.0 > netmask 255.255.255.0 > gateway 172.20.0.1 > bridge_ports p5p1 > dns-nameservers 8.8.8.8 > > with this config, i think so ubuntu use brctrl, > > *brctl show > bridge name bridge id STP enabled interfaces > br0 8000.3085a9b07cae no p5p1* > ovs-vsctl add-br br0 > and then use this command *ovs-vsctl add-br br0* ? > > or i changing my config to below? > > auto p5p1 > iface p5p1 inet static > address 172.20.0.14 > network 172.20.0.0 > netmask 255.255.255.0 > gateway 172.20.0.1 > dns-nameservers 8.8.8.8 > > and then use *ovs-vsctl add-br br0*? > 2013/9/4 Dmitri Chebotarov <[email protected]> > >> Can you create br0 with real interfaces before you add host to ONE and >> use br0 in network config section? The same way you created fake br10, but >> use ethXX . This should work... >> >> You don't need brctl, OVS takes care of creating br0 with 'ovs-vsctl >> addbr'. >> >> ------------------------------ >> *From:* [email protected] < >> [email protected]> on behalf of [email protected] < >> [email protected]> >> *Sent:* Wednesday, September 04, 2013 6:28 AM >> *To:* [email protected] >> *Subject:* [one-users] haveing problem with vswitch >> >> I read openvswitch document completely about openvswitch >> http://opennebula.org/documentation:rel4.2:openvswitch >> >> there is 2 way for using openvswitch, i can implant second way >> (*ovswitch_brcompat) >> *but this way is deprecated >> *Bridge compatibility is deprecated and may be removed no earlier than >> February 2013* >> >> now but when I'm using first way, (using from openvswith without * brcompat >> *and use from brctrl instead), opennebula when deploying new vm get >> error. >> >> >> >> Wed Sep 4 06:05:28 2013 [VMM][I]: post: Executed "sudo /usr/bin/ovs-vsctl >> set Port vnet0 tag=550". >> Wed Sep 4 06:05:28 2013 [VMM][I]: ovs-ofctl: br0 is not a bridge or a >> socket >> Wed Sep 4 06:05:28 2013 [VMM][E]: post: Command "sudo /usr/bin/ovs-ofctl >> add-flow br0 >> in_port=,dl_src=02:00:ac:14:04:04,priority=40000,actions=normal" failed. >> Wed Sep 4 06:05:28 2013 [VMM][E]: post: ovs-ofctl: >> dl_src=02:00:ac:14:04:04: bad syntax for in_port >> Wed Sep 4 06:05:28 2013 [VMM][E]: ovs-ofctl: dl_src=02:00:ac:14:04:04: >> bad syntax for in_port >> >> the main problem is that br0 is not created with openvswitch and create >> with brctl :) >> >> but for solve this problem, I create fake bridge with openvswith >> >> # ovs-vsctl add-br br0 >> # ovs-vsctl add-port br0 eth1 >> # ovs-vsctl add-br br10 br0 10 >> # ovs-vsctl list-br >> br0 >> br10 >> >> so I inform to opennebula, br10 is my bridge >> now problem is ovs-ofctl using br10 instead br0 and i get error from >> ovs-ofctl >> . >> >> in this situation, ovs-vsctl must use fake bridge (br10) and ovs-ofctl >> must use real bridge (br0) until anything work well >> >> >> > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > > -- Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> in Berlin, 24-26 September, 2013 -- Jaime Melis Project Engineer OpenNebula - The Open Source Toolkit for Cloud Computing www.OpenNebula.org | [email protected]
_______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
