Dear OpenNebula Community, 1) To create VM using OpenNebula 3.6.0 in Ubuntu 12.04 with iSCSI datastore, I create Front-end, NodeServer and iSCSIHost (an iSCSI target VM created within the NodeServer. The IP of iSCSIHost is 192.168.1.7).
The required setup, configuration for Front-end, NodeServer and iSCSIHost looks fine. The host, image, vnet and datastore creation under NodeServer are ok (except of the VM creation in below 2) ), but when "oneimage show 0", can't see output of "SOURCE: iqn.2013-12.iSCSIHost:192.168.1.7.vg-one.lv-one-13 PATH: /var/lib/images/win-xp.qcow2" while only can see "SOURCE: /var/lib/images/win-xp.qcow2". the opennebula 3.6.0 used was downloaded in more than one year ago. is it the correct version of opennebula to use? 2) the VM creation is failed and got "error executing image transfer script: error cloning NodeServer:/dev//var/lib/image/win-xp-2/qcow2-0". Below is the vm.log for this VM creation: Wed Dec 4 17:38:56 2013 [DiM][I]: New VM state is ACTIVE. Wed Dec 4 17:38:56 2013 [LCM][I]: New VM state is PROLOG. Wed Dec 4 17:38:56 2013 [TM][I]: Command execution fail: /var/lib/one/var/remotes/tm/iscsi/clone Front-end:/var/lib/image/win-xp-2.qcow2 NodeServer:/var/lib/one/var//datastores/0/0/disk.0 0 101 Wed Dec 4 17:38:56 2013 [TM][E]: clone: Command " set -e Wed Dec 4 17:38:56 2013 [TM][I]: Wed Dec 4 17:38:56 2013 [TM][I]: # get size Wed Dec 4 17:38:56 2013 [TM][I]: SIZE=$(sudo lvs --noheadings -o lv_size "/dev//var/lib/image/win-xp-2/qcow2") Wed Dec 4 17:38:56 2013 [TM][I]: Wed Dec 4 17:38:56 2013 [TM][I]: # create lv Wed Dec 4 17:38:56 2013 [TM][I]: sudo lvcreate -L${SIZE} /var/lib/image/win-xp-2 -n qcow2-0 Wed Dec 4 17:38:56 2013 [TM][I]: Wed Dec 4 17:38:56 2013 [TM][I]: # clone lv with dd Wed Dec 4 17:38:56 2013 [TM][I]: sudo dd if=/dev//var/lib/image/win-xp-2/qcow2 of=/dev//var/lib/image/win-xp-2/qcow2-0 bs=64k Wed Dec 4 17:38:56 2013 [TM][I]: Wed Dec 4 17:38:56 2013 [TM][I]: # new iscsi target Wed Dec 4 17:38:56 2013 [TM][I]: TID=$(sudo tgtadm --lld iscsi --op show --mode target | grep "Target" | tail -n 1 | awk '{split($2,tmp,":"); print tmp[1]+1;}') Wed Dec 4 17:38:56 2013 [TM][I]: Wed Dec 4 17:38:56 2013 [TM][I]: sudo tgtadm --lld iscsi --op new --mode target --tid $TID --targetname Front-end:/var/lib/image/win-xp-2.qcow2-0 Wed Dec 4 17:38:56 2013 [TM][I]: sudo tgtadm --lld iscsi --op bind --mode target --tid $TID -I ALL Wed Dec 4 17:38:56 2013 [TM][I]: sudo tgtadm --lld iscsi --op new --mode logicalunit --tid $TID --lun 1 --backing-store /dev//var/lib/image/win-xp-2/qcow2-0 Wed Dec 4 17:38:56 2013 [TM][I]: sudo tgt-admin --dump |sudo tee /etc/tgt/targets.conf >& /dev/null" failed: ssh: Could not resolve hostname /var/lib/image/win-xp-2.qcow2: Name or service not known Wed Dec 4 17:38:56 2013 [TM][E]: Error cloning NodeServer:/dev//var/lib/image/win-xp-2/qcow2-0 Wed Dec 4 17:38:56 2013 [TM][I]: ExitCode: 255 Wed Dec 4 17:38:56 2013 [TM][E]: Error executing image transfer script: Error cloning NodeServer:/dev//var/lib/image/win-xp-2/qcow2-0 Wed Dec 4 17:38:56 2013 [DiM][I]: New VM state is FAILED 3) the iSCSI INITIATOR is only installed in the NodeServer. the tgt (for tgt admin) is only installed in the iSCSIHost, so the /etc/tgt/targets.conf is only in the iSCSIHost. >From the result, it doesn't look like the Front-end and NodeServer can well communicate with the iSCSIHost, can access the iSCSI storage partition created under the iSCSIHost target. It is much appreciated if anyone can help with the above. Thanks kindly, Q.S.
_______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org