Hi,
As you may work out Im not an expert in this, hopefully for those of you that
are this is a pretty straight forward question.
Im trying to implement something like this:
Cisco_as5300 <-----> OpenSER <------> Atersisk
PSTN Gateway SIP Proxy PBX
^
Radius
I am attempting to setup OpenSER as a SIP proxy for a Cisco PSTN Gateway, on
the other side of OpenSER I have an Asterisk system. My confusion centres
around the connection between the end users (SNOM or whatever) which hang off
Asterisk and the connection between Asterisk and OpenSER. I have configure
Asterisk to SIP register to OpenSER, all works ok here and Asterisk sees
OpenSER as a SIP peer and channel. The bit Im not getting is that when someone
dials a number from a handset connected to Asterisk that needs to route out via
OpenSER, Asterisk seems to pass the username and password credentials of the
handset to OpenSER. Firstly if its going to do this, then what is the point of
SIP registering Asterisk as its authenticating ever session as individual
entities anyway, secondly this isnt scaleable :( it seems to mean I have to
configure each SNOM user both in Asterisk and in OpenSER. All of which doesnt
seem very logical, can anyone tell me if I'm doing something wrong or if Im
approaching this in the wrong way or if I need to approach the problem in some
other way...
The end goal of this is that Id like the ability to bill on a per SIP peer
basis customer Asterisk boxes, I dont want to end up in a situation were I have
to know about every SNOM a customer has.
many many thanks in advance, Im a bit stuck at the mo! thanks Andy._______________________________________________
Users mailing list
Users@lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
