Hi group,
Im new in the mailing list, and starting again with Openser, last time
I used was first release like an alternative to SER. Later dont run
any SIP service. Actually Im testing OpenSer for a new service, voice
service with PSTN, etc, and Im testing accounting via radius.
I use this help to work basic things.
www.openser.org/docs/openser-radius-1.0.x.html thanks for this
documentation very helpful for me.
But I dont get same result.
My version Openser 1.2.2.
I get this fields in start and stop, very less than example.
Wed Dec 12 17:33:12 2007
Acct-Status-Type = Start
Service-Type = SIP
Sip-Response-Code = 200
Sip-Method = 1
Event-Timestamp = "Dec 12 2007 17:33:05 ART"
Sip-From-Tag = "94ab8960-c82d7718-13c4-7db17-4cc178eb-7db17"
Sip-To-Tag = "94b908a0-c82d7717-13c4-3815-ecb28f3-3815"
Acct-Session-Id =
"[EMAIL PROTECTED]"
NAS-Port = 5060
Acct-Delay-Time = 0
NAS-IP-Address = xxx.xxx.xxx.3
Client-IP-Address = xxx.xxx.xxx.3
Acct-Unique-Session-Id = "49ff3575432365d6"
Timestamp = 1197491592
Wed Dec 12 17:33:19 2007
Acct-Status-Type = Stop
Service-Type = SIP
Sip-Response-Code = 200
Sip-Method = Bye
Event-Timestamp = "Dec 12 2007 17:33:11 ART"
Sip-From-Tag = "94b908a0-c82d7717-13c4-3815-ecb28f3-3815"
Sip-To-Tag = "94ab8960-c82d7718-13c4-7db17-4cc178eb-7db17"
Acct-Session-Id =
"[EMAIL PROTECTED]"
NAS-Port = 5060
Acct-Delay-Time = 0
NAS-IP-Address = xxx.xxx.xxx.3
Client-IP-Address = xxx.xxx.xxx.3
Acct-Unique-Session-Id = "49ff3575432365d6"
Timestamp = 1197491599
I think is about default fields to send for accounting via radius, How
to get full info??? With radius_extra modparam???
Thanks in advanced.
Fernando Yubero
Communication Partner
_______________________________________________
Users mailing list
[email protected]
http://lists.openser.org/cgi-bin/mailman/listinfo/users
