Hi,
I have problem with CPL. This is my config file for openser:
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes # Set to no to enter debugging mode
log_stderror=no # (cmd line: -E) Set to yes to enter debugging mode
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"
#
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify = 1
#tls_require_certificate = 0
#tls_method = TLSv1
#tls_certificate =
"/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-cert.pem"
#tls_private_key =
"/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-privkey.pem"
#tls_ca_list =
"/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-calist.pem"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
# mysql.so must be loaded !
loadmodule "/usr/lib/openser/modules/mysql.so"
loadmodule "/usr/lib/openser/modules/sl.so"
loadmodule "/usr/lib/openser/modules/tm.so"
loadmodule "/usr/lib/openser/modules/rr.so"
loadmodule "/usr/lib/openser/modules/maxfwd.so"
loadmodule "/usr/lib/openser/modules/usrloc.so"
loadmodule "/usr/lib/openser/modules/registrar.so"
loadmodule "/usr/lib/openser/modules/textops.so"
#cpl modul -- dopisali sme tu my !!!!!!
loadmodule "/usr/lib/openser/modules/cpl-c.so"
# Uncomment this if you want digest authentication
#loadmodule "/usr/lib/openser/modules/auth.so"
#loadmodule "/usr/lib/openser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
#---CPL-C Parameter
modparam("cpl-c","db_url","mysql://openser:[EMAIL PROTECTED]/openser")
modparam("cpl-c","cpl_table","cpl")
modparam("cpl-c","cpl_dtd_file","/etc/openser/cpl-06.dtd")
modparam("cpl-c","log_dir","/var/log/openser/cpl")
#modparam("cpl-c","proxy_recurse",2)
#modparam("cpl-c","proxy_route",0)
#modparam("cpl-c","nat_flag",6)
modparam("cpl-c","lookup_domain","location")
#cpl_run_script("incoming","force_statefull")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
#if(uri=~"@tls_domain1.net") {
# t_relay("tls:domain1.net");
# exit;
#} else if(uri=~"@tls_domain2.net") {
# t_relay("tls:domain2.net");
# exit;
#}
route(1);
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
#if (!www_authorize("openser.org", "subscriber")) {
# www_challenge("openser.org", "0");
# exit;
#};
cpl_process_register();
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
route[1] {
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
and this is easy cpl script:
<?xml version="1.0" encoding="UTF-8"?>
<cpl>
<incoming>
<reject status="400" reason="Busy" />
</incoming>
</cpl>
Upload of this cpl script to DB is correct, record in table "cpl" is created
for "user" but when I am calling to this "user", openser ignores this script
and phone is ringing.
I don't know what is problem, could somebody help me?
thanks
Martin
--
View this message in context:
http://www.nabble.com/Ignore-CPL-script-tp14438450p14438450.html
Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.
_______________________________________________
Users mailing list
[email protected]
http://lists.openser.org/cgi-bin/mailman/listinfo/users
