On Thursday 03 January 2008 12:36:24 Jesus Rodriguez wrote: > Hola Iñaki, > > > The problem is that this "200 OK" from OpenSer to Linksys PAP is not > > recognized by Linksys PAP > > who doesn't reply with an ACK (just ignores the "200 OK"), so the > > "200 OK" is resent again > > and again by Asterisk. > > > > This issue just occurs with the Linksys PAP: > > Product Name: PAP2-NA > > Software Version: 2.0.12(LS) Hardware Version: 0.03.4 > > I would recommend to upgrade the firmware version of the PAP2. Version > 2.0.12 is a pretty old.
Yes, I upgraded to 3.1.22(LS) and the issue has dissapeared. Anyway it scares me a little if some UAC don't allow certains parameters as: vsf=AAAAAAAAAB8AAAAAAAAAAAAAAAAAAAAAAEBvcGVuc2VyLmlsaW1pdC5lcw-- Maybe Linksys with old firmware didn't accepted that parameter because it's very long. Other parameters as "dialog" were allowed in Record-Route header. Obviosly it's a bug in Linksys, but hope it doesn't occur in other common UACs. Thank a lot ;) -- Iñaki Baz Castillo [EMAIL PROTECTED] _______________________________________________ Users mailing list [email protected] http://lists.openser.org/cgi-bin/mailman/listinfo/users
