Hello, changes in configuration script take place once you restart openser.
Cheers, Daniel On 03/20/08 09:01, Devesh wrote: > Hi Daniel, > > Thank you very much. > Now it's resolved. > It was exactly authorization problem. Thanks for your support. > One question (may not be good) but, Is there any timer internally used to > refresh all cache because same script(after a change) was working after few > hours.(i.e. changes took place after few hrs.) > Or is it m/c dependent? > > > Thanks & Regards > Devesh Bissa > persistent system ltd. > > > > -----Original Message----- > From: Daniel-Constantin Mierla [mailto:[EMAIL PROTECTED] > Sent: Tuesday, March 18, 2008 4:51 PM > To: Devesh > Cc: Users@lists.openser.org > Subject: Re: [OpenSER-Users] openser msilo problem > > Hello, > > On 03/18/08 13:02, Devesh wrote: > >> Hi Daniel, >> Again thanks. >> I have commented authentication part from file openser.cfg . But this is >> > not > >> working for me . >> > there might be other problems. > >> Where should I change in file. >> >> > that is hard to tell :-) > > I would recommend you to install ngrep, wireshark or other network > sniffing tool and watch the sip traffic. It will help to troubleshoot > better, you will see where sip messages are sent and where (if) are blocked. > > Cheers, > Daniel > > PS. please cc to mailing list. > > >> Thanks & Regards >> Devesh Bissa >> persistent system ltd. >> >> >> >> -----Original Message----- >> From: Daniel-Constantin Mierla [mailto:[EMAIL PROTECTED] >> Sent: Tuesday, March 18, 2008 3:27 PM >> To: Devesh >> Cc: [EMAIL PROTECTED] >> Subject: Re: [OpenSER-Users] openser msilo problem >> >> Hello, >> >> seems that you authenticate the MESSAGEs sent by msilo -- filter out >> these ones, the source IP should be localhost. >> >> Cheers, >> Daniel >> >> >> On 03/18/08 11:49, Devesh wrote: >> >> >>> Hi Daniel, >>> Thanks for your reply. >>> I am not able to grep any message because this utility is not on my >>> >>> >> machine. >> >> >>> I am sending you MSILO log.(attached) >>> Please guide me where I am wrong. >>> >>> >>> Thanks & Regards >>> Devesh Bissa >>> persistent system ltd. >>> >>> >>> >>> -----Original Message----- >>> From: Daniel-Constantin Mierla [mailto:[EMAIL PROTECTED] >>> Sent: Tuesday, March 18, 2008 2:30 PM >>> To: Deveshb >>> Cc: users@lists.openser.org >>> Subject: Re: [OpenSER-Users] openser msilo problem >>> >>> Hello, >>> >>> On 03/14/08 16:17, Deveshb wrote: >>> >>> >>> >>>> Hi, >>>> I have install openser with msilo module . Offline messages stored >>>> >>>> >>>> >>> there >>> >>> >>> >>>> but it's not deliver to client( I am using X-Lite). >>>> it gives me following error >>>> DBG:maxfwd:is_maxfwd_present: max_forwards header not found! >>>> DBG:uri:has_totag: no totag >>>> DBG:tm:t_lookup_request: start searching: hash=3841, isACK=0 >>>> DBG:tm:matching_3261: RFC3261 transaction matching failed >>>> DBG:tm:t_lookup_request: no transaction found >>>> >>>> >>>> >>>> >>> these are not errors, are debug messages. >>> >>> Grab the SIP traffic for this case and and send here, that will show >>> where the message is delivered. Sample command: >>> >>> ngrep -d any -qt -W byline port 5060 >>> >>> Cheers, >>> Daniel >>> >>> >>> >>> >>> >>> >>>> Could you please help me . >>>> >>>> Thank you >>>> Devesh >>>> >>>> >>>> >>>> >>> DISCLAIMER >>> ========== >>> This e-mail may contain privileged and confidential information which is >>> >>> >> the property of Persistent Systems Ltd. It is intended only for the use of >> the individual or entity to which it is addressed. If you are not the >> intended recipient, you are not authorized to read, retain, copy, print, >> distribute or use this message. If you have received this communication in >> error, please notify the sender and delete all copies of this message. >> Persistent Systems Ltd. does not accept any liability for virus infected >> mails. >> >> >>> >>> >>> >> DISCLAIMER >> ========== >> This e-mail may contain privileged and confidential information which is >> > the property of Persistent Systems Ltd. It is intended only for the use of > the individual or entity to which it is addressed. If you are not the > intended recipient, you are not authorized to read, retain, copy, print, > distribute or use this message. If you have received this communication in > error, please notify the sender and delete all copies of this message. > Persistent Systems Ltd. does not accept any liability for virus infected > mails. > >> >> > > > DISCLAIMER > ========== > This e-mail may contain privileged and confidential information which is the > property of Persistent Systems Ltd. It is intended only for the use of the > individual or entity to which it is addressed. If you are not the intended > recipient, you are not authorized to read, retain, copy, print, distribute or > use this message. If you have received this communication in error, please > notify the sender and delete all copies of this message. Persistent Systems > Ltd. does not accept any liability for virus infected mails. > _______________________________________________ Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users