Hi Victor, if a UAC wants to have asymmetric signalling, just send from IP_A:PORT_A and put in top most via IP_B:PORT_B - via is used for routing back the reply.
regards, Bogdan Victor Cartes wrote: > Thanks, Iñaki. But It is not what I really need. > > I need to send to an UAS a SIP Request, like OPTIONS, and tell it to > send the reply to a different transport address (IP Addr + Port) than > the source address of the request. > > This is, basically, in order to perform NAT discovering and typing > from the server. > > Thanks in advance, > > Víctor > > > > > 2008/4/7, Victor Cartes <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > Actually not. What I need the UAS exactly to do is to send the SIP > reply to a different IP address than the source of the SIP Request > that it is replying to. Just how it sends the replies to the UDP > port specified in top most Via HF. > > > 2008/4/7, Bogdan-Andrei Iancu <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > Hi Victor, > > Not sure I got your question correctly, but you mean like > something like "received" via param used to route back the > replies? > > Regards, > Bogdan > > Victor Cartes wrote: > > Hello to all, > > About SIP/UDP: Is there any way to specify the IP address > for SIP responses, in a similar fashion as port specified > on top most Via HF? > > Thanks in advance, > > Víctor > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > [email protected] <mailto:[email protected]> > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > > > > _______________________________________________ Users mailing list [email protected] http://lists.openser.org/cgi-bin/mailman/listinfo/users
