Can u tell me how do I load the sipauth module without the sipauth.so file?
Cheers, Flo Elena-Ramona Modroiu-2 wrote: > > Hi, > > check if the print.so exists. Also change in the config file the print > module loading directive to > > module= print.so > > Regards, > Ramona > > > > Florian Schildger wrote: >> >> Hi @ all, >> >> I want to built a Diameter-Client and –Server with disc, but it is >> very tricky. Can someone help me? >> >> My plan is, a UA gives an invite to a SIP Express Router, this one >> forwards the request to a DISC Client, which forwards the request to >> the DISC Server and authenticate the UA. >> My first problem is to start the DISC. >> >> What I did: >> >> 1. Download the disc with cvs and Install it >> >> cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/disc >> <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de1361741099.1214292288.7541f343&to=-d%3Apserver%3Aanonymous%40cvs.disc.berlios.de> >> >> login >> cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/disc >> <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de1361741099.1214292288.7541f343&to=-d%3Apserver%3Aanonymous%40cvs.disc.berlios.de> >> >> co disc >> ./rebuild >> make >> make install >> >> 2. Then Configure aaa_client.cfg >> >> 17 aaa_realm= 192.160.45 >> 18 aaa_fqdn = 192.160.45:1810 >> >> 21 module_path= usr/local/lib/disc/client/ >> 22 module= usr/local/lib/disc/client/print.so >> >> 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server >> 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER >> >> 42 route= aaa://192.168.0.45:1812;transport=tcp >> >> # For the Modules I don't know what to do, because I couldn't find any >> module!!! Only the print one, but I think I don'tneed it, do I? >> >> 3. After that I could't not start disc, because I had no File disc.cfg >> in /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg >> to disc.cfg >> >> cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg >> >> 4. Then I start in the Console: >> >> debian:~# disc >> qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) >> qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 >> (size=12) on 1 -th hit >> qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) >> qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 >> (size=16) on 1 -th hit >> qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) >> qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 >> (size=28) on 1 -th hit >> before loading the modules >> loading module >> usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, 35) called >> from cfg_parser.c: cfg_getstr(213) >> qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c >> (size=36) on 1 -th hit >> ERROR: load_module: failed to load >> <usr/local/lib/disc/client/print.so> in <client/modules>: >> usr/local/lib/disc/client/print.so: cannot open shared object file: No >> such file or directory >> FAILED >> ERROR (-1): on line 25 >> ERROR: cannot init the core >> ERROR:AAAClose: AAA library is not initialized >> INFO:init_trans_manager: transaction manager stoped! >> INFO:destroy_peer_manager: peer manager stoped >> INFO:destroy_timer: timer thread stoped >> qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: >> destroy_aaa_core(576) >> qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: >> cfg_getstr(213) >> qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: >> destroy_aaa_core(577) >> qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: >> cfg_getstr(213) >> qm_status (0xb7cab008): >> heap size= 1022872 >> used= 68, used+overhead=26012, free=996860 >> max used (+overhead)= 26040 >> dumping all allocked. fragments: >> 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 >> alloc'd from shm_mem.c: shm_mem_init_mallocs(185) >> start check=f0f0f0f0, end check= c0c0c0c0, abcdefed >> 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 >> alloc'd from cfg_parser.c: cfg_getstr(213) >> start check=f0f0f0f0, end check= c0c0c0c0, abcdefed >> 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 >> alloc'd from cfg_parser.c: cfg_getstr(213) >> start check=f0f0f0f0, end check= c0c0c0c0, abcdefed >> dumping free list stats : >> hash= 3. fragments no.: 1 >> hash= 4. fragments no.: 1 >> hash= 521. fragments no.: 1 >> ----------------------------- >> shm_mem_destroy >> destroying the shared memory lock >> >> >> He could not load the module right? But where I can get it? How can I >> use disc as Client and Server? I did only the configure for the >> client! I read out, that disc only can work as an client or as an server. >> >> Can someone give me a hint? >> >> Cheers, Flo >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Users mailing list >> Users@lists.openser.org >> http://lists.openser.org/cgi-bin/mailman/listinfo/users >> > > > _______________________________________________ > Users mailing list > Users@lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > -- View this message in context: http://www.nabble.com/Re%3A-I-can%27t-configure-Diameter-Client-Server-%28DISC%29-tp18088677p18091663.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com. _______________________________________________ Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
