TLS uses a different port than TCP. TCP is 5060 and TLS is 5061. Regards, Bogdan
[EMAIL PROTECTED] wrote: > Hi Bogdan-Andrei Iancu, > > Thanks for your reply . > > When Sending a INVITE request without (no-TLS) proxy establishes TCP > connection successfully & call Succeeds. > But, when tried INVITE with (TLS) proxy fails to establish TCP > connection & get the below error. > > Am I missing something?? > Is there any configurable parameter which has to be used in ser.cfg > > Regards, > Pravin.swami > > > > > > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] > Sent: Monday, July 14, 2008 2:02 PM > To: Pravin Sidram swami (WT01 - MCE-Mobile Devices) > Cc: users@lists.openser.org > Subject: Re: [OpenSER-Users] FW: OpenSER 1.3.2-tls - error > tcp_blocking_connect > > Hi, > > The error message specks for it self : > Connection refused > > So, your OpenSER tried to open a TCP/TLS connection to an address where > nobody was listening. > > Regards, > Bogdan > > > [EMAIL PROTECTED] wrote: > >> >> Hi... All , >> >> I have Configured OpenSER 1.3.2-tls source code & compiled >> successfully . >> >> Registration is successful with TLS handshake . >> >> Below is the scenario of my test . >> >> UA1 & UA2 clients Registers on TLS. >> >> When UA1 send INVITE request to UA2 >> >> I got the Following Error : >> >> : SIP/2.0 477 Send failed (477/TM) >> >> When i scanned through the logs of openser I got the following Message >> > > >> : proxy always trying to establish TCP connection but it Fails. >> >> Jul 11 23:55:20 [22415] DBG:core:check_via_address: params >> 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] >> DBG:core:tcp_send: no open tcp connection found, opening new one Jul >> 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: poll error: >> flags 18 >> Jul 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: failed to >> retrieve SO_ERROR (111) Connection refused Jul 11 23:55:20 [22415] >> ERROR:core:tcpconn_connect: >> tcp_blocking_connect failed >> Jul 11 23:55:20 [22415] ERROR:core:tcp_send: connect failed Jul 11 >> 23:55:20 [22415] ERROR:tm:msg_send: tcp_send failed Jul 11 23:55:20 >> [22415] ERROR:tm:t_forward_nonack: sending request failed Jul 11 >> 23:55:20 [22415] DBG:tm:t_relay_to: t_forward_nonack returned error >> Jul 11 23:55:20 [22415] DBG:core:parse_headers: flags=ffffffffffffffff >> > > >> Jul 11 23:55:20 [22415] DBG:core:check_via_address: params >> 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] >> DBG:tm:run_trans_callbacks: trans=0xb5db7e50, callback type 128, id 0 >> entered >> ACC: call missed: >> timestamp=1215800720;method=INVITE;from_tag=20282693445eido3yklvo4;to_ >> tag=;call_id=8307080595eido3erlzgw;code=477;reason=Request >> Failure >> >> - Presently i don't have any DNS server , is that >> really matters ?? >> - While openser tries to open TCP connection with >> UAS it's sending port ' 0 ' , but fails is it ok .?? , or Anything >> I'm missing in Configuration . >> I have Attahced config file Also. >> >> Thanks & Regards, >> Pravin.swami >> >> _______________________________________________ Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
