Have you read the RATING.txt document?
3. Determination of the destination id
This section is relevant and you have not done any Radius setup to
store the CanonicalURI in your openser and mediaproxy as far as I can
see from your examples:
Adrian
On Nov 18, 2008, at 9:43 AM, Dilip wrote:
Hi Adrian,
I have paste the radacct ticket below.
Mon Nov 10 03:14:46 2008
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = INVITE
Event-Timestamp = "Nov 10 2008 03:14:46 EST"
Sip-From-Tag = "e4714a611fffea51"
Sip-To-Tag = "10114108130863030106211833"
Acct-Session-Id = "[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>"
Called-Station-Id = "sip:[EMAIL PROTECTED]:3300;user=phone
"
Calling-Station-Id = "sip:[EMAIL PROTECTED]:3300;user=phone"
X-Ascend-IPX-Peer-Mode =
0x7369703a31333033333337323530304036372e3230352e38352e3131393a333330303b757365723d70686f6e65
User-Name = "10009"
Attr-111 = 0x36372e3230352e38352e313139
X-Ascend-Send-Secret = 0x35382e36382e3132332e3531
X-Ascend-Receive-Secret = 0x3634353235
X-Ascend-FR-Direct-DLCI =
0x2275726d6922203c7369703a31303030394036372e3230352e38352e3131393a333330303b757365723d70686f6e653e3b7461673d65343731346136313166666665613531
X-Ascend-Handle-IPX =
0x4772616e6473747265616d20425431323020312e312e302e32
NAS-IP-Address = 192.168.1.56
NAS-Port = 5060
Acct-Delay-Time = 0
Client-IP-Address = 192.168.1.56
Acct-Unique-Session-Id = "4a99b229fe5c3e83"
Timestamp = 1226304886
Mon Nov 10 03:14:46 2008
Acct-Status-Type = Stop
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = BYE
Event-Timestamp = "Nov 10 2008 03:14:46 EST"
Sip-From-Tag = "e4714a611fffea51"
Sip-To-Tag = "10114108130863030106211833"
Acct-Session-Id = "[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>"
Called-Station-Id = "sip:
[EMAIL PROTECTED]:3300;user=phone"
Calling-Station-Id = "sip:[EMAIL PROTECTED]:3300;user=phone"
X-Ascend-IPX-Peer-Mode =
0x7369703a31333033333337323530304036372e3230352e38352e3131393a333330303b757365723d70686f6e65
User-Name = "10009"
Attr-111 = 0x36372e3230352e38352e313139
X-Ascend-Send-Secret = 0x35382e36382e3132332e3531
X-Ascend-Receive-Secret = 0x3634353235
X-Ascend-FR-Direct-DLCI =
0x2275726d6922203c7369703a31303030394036372e3230352e38352e3131393a333330303b757365723d70686f6e653e3b7461673d65343731346136313166666665613531
X-Ascend-Handle-IPX =
0x4772616e6473747265616d20425431323020312e312e302e32
NAS-IP-Address = 192.168.1.56
NAS-Port = 5060
Acct-Delay-Time = 0
Client-IP-Address = 192.168.1.56
Acct-Unique-Session-Id = "4a99b229fe5c3e83"
Timestamp = 1226304886
Please give me any idea so that i can complete it.
Regards,
Dilip
Adrian Georgescu wrote:
Hi Dilip,
I canot see any calls at all in your syslog entries. As a wild guess
most probably your destination field is not formatted correctly, it
should start with 00 to be matched by the standard destination lookup
logic.
Can you paste the Radius accounting tickets for one OpenSER session
(START, STOP, UPDATE radius tickets)?
You can find the radius tickets under /var/log/freeradius/radacct/*
Regards,
Adrian
On Nov 17, 2008, at 1:25 PM, Dilip wrote:
hello Sir,
Actually i could not see the price in the CDRTool GUI.
I have configured it according to the rating document.but Still
there is
not any calculation is start by cdrtool.
What may be the problem ???
I have paste here the syslog message...so please guide me.
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
