Also I'm using SIP 3.0.3.x load in case that matters. -Steve
-----Original Message----- From: Anca Vamanu [mailto:[email protected]] Sent: Thursday, January 15, 2009 7:47 AM To: Yehavi Bourvine Cc: Steven C. Blair; users Subject: Re: [OpenSIPS-Users] BLF under OpenSIPS tutorial? Hi Yehavi, I have browsed through the OpenSIPS config file and it looks ok. For the phone, you need to set the thirdPartyName to have BLA working. I have mentioned in the last e-mail - Subscribe for line-size is not needed. To check that the messages go as they should please send a message trace. Include the following events: - one phone registering( restart it by unplugging it) - lift the hand set on one phone. You can use ngrep command: 'ngrep -qt -d any -W byline port 5060'. regards, Anca Yehavi Bourvine wrote: > There is no proxy between the phones and the OpenSIPS server. As far > as I understood OpenSIPS is the prensence server in the way I work, or > maybe I am missing something fundamental... > > Thanks, __Yehavi: > > 2009/1/14 Steven C. Blair <[email protected] > <mailto:[email protected]>> > > > > Yehavi: > > > > In your proxy do you: > > > > 1) Simply relay SUBSCRIBE > > 2) Simply relay PUBLISH messages which originate from the > presence server > > 3) Simply relay NOTIFY messages? > > > > These steps can be refined later but for now I would do each of > these as well as replicate REGISTER request for shared lines to > the presence server > > > > -Steve > > *From:* Yehavi Bourvine [mailto:[email protected] > <mailto:[email protected]>] > *Sent:* Wednesday, January 14, 2009 10:43 AM > *To:* Steven C. Blair; [email protected] <mailto:[email protected]> > > *Subject:* Re: [OpenSIPS-Users] BLF under OpenSIPS tutorial? > > > > > Hello Anca & Steven, > > > > Since I've tried all the sugestions that the two of you have > sent me to no avail, I am appending here the config files which I > think are relevant and will be thankfull for your help. > > > > But first, to make sure we call the same child with the same > name... I have two Ploycom-501 phones, version 3.1.1; Each phone > has a line/extension (the top button) and two speed dials > (buddies). BLA stands sharing the same line, and BLF is using the > buddies to see the buddy's status. > > > > on Asterisk BLF works, BLA is cumbersome to do so I didn't try. On > OpenSIPS I understand that BLA is working but BLF not... So I am > now trying the BLA feature. > > > > Hence, I want the two phones to share the same extension number > and see the status of each one. Thus, the xxxxxx-settings.cfg is > identical for both phones, like: > > <? > > xml version="1.0" encoding="UTF-8" standalone="yes"?> > > < > > reginfo> > > < > > reg reg.1.displayName="80622" reg.1.address="80622" > reg.1.label="80622" > > reg.1.type="shared" reg.1.auth.userId="80622" > > reg.1.auth.password="XXXXXX" /> > > </ > > reginfo> > > > > Note: With the above config, when I lift the handset the phone > sends SUBSCRIBE for itself with "line-seize". If I add > reg.1.thirdPartyName="80622" then it doesn't generate it. > > > > I attach as files the local-sip.cfg, local-phone.cfg and OpenSIPS > config file. > > > > Thank you in advance! __Yehavi: > > > > > _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
