Hi Khan, The xlite UAC does not work as it is in a different network and media cannot flow directly between the caller and callee - for this to work you need to use a media relay.
Regards, Bogdan Khan Friend wrote: > Hi everyone, > > I have installed OpenSIPS 1.4.4 recently on a ubuntu 8.04, I have 3 > UAC configured. Two of them are SJphone which are within the same > network. One of them (Xlite) is outside the network and behind NAT. I > am facing two problems. > > 1. The SJphone within network works fine but user hear his own echo. > 2. XLite outside network giving the error "Error no audio devices > available" > > The config file is as follows: > > ####### Global Parameters ######### > > fork=yes > children=4 > > /* uncomment the following lines to enable debugging */ > debug=6 > log_stderror=no > log_facility=LOG_LOCAL0 > > /* uncomment the next line to disable TCP (default on) */ > disable_tcp=yes > > /* uncomment the next line to enable the auto temporary blacklisting of > not available destinations (default disabled) */ > #disable_dns_blacklist=no > > /* uncomment the next line to enable IPv6 lookup after IPv4 dns > lookup failures (default disabled) */ > #dns_try_ipv6=yes > > > port=5060 > > /* uncomment and configure the following line if you want opensips to > bind on a specific interface/port/proto (default bind on all > available) */ > listen=udp:mydomain.com:5060 <http://mydomain.com:5060> > listen=udp:999.999.1.2:5060 > listen=udp:127.0.0.1:5060 <http://127.0.0.1:5060> > > #set module path > mpath="/usr/local/lib/opensips/modules/" > alias=mydomain.com <http://mydomain.com> > > /* uncomment next line for MySQL DB support */ > loadmodule "db_mysql.so" > loadmodule "sl.so" > loadmodule "tm.so" > loadmodule "rr.so" > loadmodule "maxfwd.so" > loadmodule "usrloc.so" > loadmodule "registrar.so" > loadmodule "textops.so" > loadmodule "mi_fifo.so" > loadmodule "uri_db.so" > loadmodule "uri.so" > loadmodule "xlog.so" > loadmodule "acc.so" > /* uncomment next lines for MySQL based authentication support > NOTE: a DB (like db_mysql) module must be also loaded */ > loadmodule "auth.so" > loadmodule "auth_db.so" > /* uncomment next line for aliases support > NOTE: a DB (like db_mysql) module must be also loaded */ > loadmodule "alias_db.so" > /* uncomment next line for multi-domain support > NOTE: a DB (like db_mysql) module must be also loaded > NOTE: be sure and enable multi-domain support in all used modules > (see "multi-module params" section ) */ > loadmodule "domain.so" > /* uncomment the next two lines for presence server support > NOTE: a DB (like db_mysql) module must be also loaded */ > #loadmodule "presence.so" > #loadmodule "presence_xml.so" > > > # ----------------- setting module-specific parameters --------------- > modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") > modparam("rr", "enable_full_lr", 1) > modparam("rr", "append_fromtag", 0) > modparam("registrar", "method_filtering", 1) > modparam("uri_db", "use_uri_table", 0) > modparam("uri_db", "db_url", "") > > modparam("acc", "early_media", 1) > modparam("acc", "report_ack", 1) > modparam("acc", "report_cancels", 1) > modparam("acc", "detect_direction", 0) > modparam("acc", "failed_transaction_flag", 3) > modparam("acc", "log_flag", 1) > modparam("acc", "log_missed_flag", 2) > modparam("acc", "db_flag", 1) > modparam("acc", "db_missed_flag", 2) > > > modparam("usrloc", "db_mode", 2) > modparam("auth_db", "calculate_ha1", yes) > modparam("auth_db", "password_column", "password") > > > > ####### Routing Logic ######## > route{ > > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > } > > if (has_totag()) { > # sequential request withing a dialog should > # take the path determined by record-routing > if (loose_route()) { > if (is_method("BYE")) { > setflag(1); # do accounting ... > setflag(3); # ... even if the transaction fails > } > route(1); > } else { > /* uncomment the following lines if you want to enable > presence */ > ##if (is_method("SUBSCRIBE") && $rd == > "your.server.ip.address") { > ## # in-dialog subscribe requests > ## route(2); > ## exit; > ##} > if ( is_method("ACK") ) { > if ( t_check_trans() ) { > # non loose-route, but stateful ACK; must be an ACK after > a 487 or e.g. 404 from upstream server > t_relay(); > exit; > } else { > # ACK without matching transaction ... ignore and > discard.\n"); > exit; > } > } > sl_send_reply("404","Not here"); > } > exit; > } > > #initial requests > > # CANCEL processing > if (is_method("CANCEL")) > { > if (t_check_trans()) > t_relay(); > exit; > } > > t_check_trans(); > > > # record routing > if (!is_method("REGISTER|MESSAGE")) > record_route(); > > # account only INVITEs > if (is_method("INVITE")) { > setflag(1); # do accounting > } > if (!uri==myself) > /* replace with following line if multi-domain support is used */ > ##if (!is_uri_host_local()) > { > append_hf("P-hint: outbound\r\n"); > route(1); > } > > # requests for my domain > > /* uncomment this if you want to enable presence server > and comment the next 'if' block > NOTE: uncomment also the definition of route[2] from below */ > ##if( is_method("PUBLISH|SUBSCRIBE")) > ## route(2); > > if (is_method("PUBLISH")) > { > sl_send_reply("503", "Service Unavailable"); > exit; > } > > > if (is_method("REGISTER")) > { > # authenticate the REGISTER requests (uncomment to enable auth) > if (!www_authorize("", "subscriber")) > { > www_challenge("", "0"); > exit; > } > > > if (!save("location")) > sl_reply_error(); > > exit; > } > > if ($rU==NULL) { > # request with no Username in RURI > sl_send_reply("484","Address Incomplete"); > exit; > } > > # apply DB based aliases (uncomment to enable) > ##alias_db_lookup("dbaliases"); > > if (!lookup("location")) { > switch ($retcode) { > case -1: > case -3: > t_newtran(); > t_reply("404", "Not Found"); > exit; > case -2: > sl_send_reply("405", "Method Not Allowed"); > exit; > } > } > > # when routing via usrloc, log the missed calls also > setflag(2); > > route(1); > } > > > route[1] { > # for INVITEs enable some additional helper routes > if (is_method("INVITE")) { > t_on_branch("2"); > t_on_reply("2"); > t_on_failure("1"); > } > > if (!t_relay()) { > sl_reply_error(); > }; > exit; > } > > > branch_route[2] { > xlog("new branch at $ru\n"); > } > > > onreply_route[2] { > xlog("incoming reply\n"); > } > > > failure_route[1] { > if (t_was_cancelled()) { > exit; > } > > } > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
