hi all, i have some problems with the configuration from opensips for the openxcap. the route from the file opensips.cfg must be configure my problem is with the "main request routing logic" I paste my main from the opensips.cfg now i must configure it with this help "http://openxcap.org/wiki/Installation";
when i copy and paste the main from the homepage and adjust the IP i get errors when i compile the file (/etc/init.d/ opensips start). can somewhere help me to configure the main or can somewhere paste his/her main which works with opensips and opnexcap? regards michael # # $Id: opensips.cfg 5503 2009-03-22 16:22:32Z bogdan_iancu $ # # OpenSIPS basic configuration script # by Anca Vamanu <[email protected]> # # Please refer to the Core CookBook at: # http://www.opensips.org/index.php?n=Resources.DocsCookbooks # for a explanation of possible statements, functions and parameters. # ####### Global Parameters ######### debug=6 log_stderror=yes log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ #auto_aliases=no /* uncomment the following lines to enable TLS support (default off) */ #disable_tls = no #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/etc/opensips/tls/user/user-cert.pem" #tls_private_key = "/etc/opensips/tls/user/user-privkey.pem" #tls_ca_list = "/etc/opensips/tls/user/user-calist.pem" port=5065 /* uncomment and configure the following line if you want opensips to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:192.168.2.5:5065 alias=presence.open-ims.test:5065 #alias=open-ims.test:5065 #alias=scscf.open-ims.test:5065 #alias=presence-server.open-ims.test:5065 ####### Modules Section ######## #set module path mpath="/usr/lib/opensips/modules/" /* uncomment next line for MySQL DB support */ loadmodule "db_mysql.so" loadmodule "signaling.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" #loadmodule "mi_datagram.so" #loadmodule "mysql.so" #loadmodule "presence_mwi.so" #loadmodule "presence_xcapdiff.so" #loadmodule "pua.so" #loadmodule "pua_mi.so" #loadmodule "rls.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like db_mysql) module must be also loaded */ loadmodule "auth.so" loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like db_mysql) module must be also loaded */ loadmodule "presence.so" loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- usrloc params ----- #modparam("usrloc", "db_mode", 0) /* uncomment the following lines if you want to enable DB persistency for location entries */ modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://opensips:opensip...@localhost/opensips") # ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "") # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) # ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://opensips:opensip...@localhost/opensips") modparam("auth_db", "load_credentials", "") # ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ modparam("alias_db", "db_url", "mysql://opensips:opensip...@localhost/opensips") # ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ modparam("domain", "db_url", "mysql://opensips:opensip...@localhost/opensips") modparam("domain", "db_mode", 1) # Use caching # ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ #modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1) # ----- presence params ----- /* uncomment the following lines if you want to enable presence */ modparam("presence|presence_xml", "db_url", "mysql://opensips:opensip...@localhost/opensips") modparam("presence_xml", "force_active", 1) modparam("presence", "server_address", "sip:192.168.2.6:5060") ####### Routing Logic ######## # main request routing logic route{ # Testlog log(1, "irgendwas kommt beim Presence Server an \n"); # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; #if (has_totag()) { # # sequential request withing a dialog should # # take the path determined by record-routing # if (loose_route()) { # if (is_method("BYE")) { # setflag(1); # do accouting ... # setflag(3); # ... even if the transaction fails # } # route(1); # } else { # /* uncomment the following lines if you want to enable presence */ # if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") { # # in-dialog subscribe requests # route(2); # exit; # } # if ( is_method("ACK") ) { # if ( t_check_trans() ) { # # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server # t_relay(); # exit; # } else { # # ACK without matching transaction ... ignore and discard.\n"); # exit; # } # } # sl_send_reply("404","Not here"); # } # exit; #} #initial requests # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authenticate if from local subscriber (uncomment to enable auth) ##if (!(method=="REGISTER") && from_uri==myself) ##{ ## if (!proxy_authorize("", "subscriber")) { ## proxy_challenge("", "0"); ## exit; ## } ## if (!check_from()) { ## sl_send_reply("403","Forbidden auth ID"); ## exit; ## } ## ## consume_credentials(); ## # caller authenticated ##} # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(1); # do accouting } #if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) #{ # append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ##if($rd=="tls_domain1.net") { ## t_relay("tls:domain1.net"); ## exit; ##} else if($rd=="tls_domain2.net") { ## t_relay("tls:domain2.net"); ## exit; ##} # route(1); #} # requests for my domain /* uncomment this if you want to enable presence server and comment the next 'if' block NOTE: uncomment also the definition of route[2] from below */ if( is_method("PUBLISH|SUBSCRIBE")) { route(2); } else { log(1, "kein publish oder subscribe \n"); } ##if (is_method("PUBLISH")) ##{ ## sl_send_reply("503", "Service Unavailable"); ## exit; ##} if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) ##if (!www_authorize("", "subscriber")) ##{ ## www_challenge("", "0"); ## exit; ##} ## ##if (!check_to()) ##{ ## sl_send_reply("403","Forbidden auth ID"); ## exit; ##} if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases"); if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also setflag(2); route(1); } route[1] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { t_on_branch("2"); t_on_reply("2"); t_on_failure("1"); } if (!t_relay()) { sl_reply_error(); }; exit; } # Presence route /* uncomment the whole following route for enabling presence NOTE: do not forget to enable the call of this route from the main route */ route[2] { log(1, "Presence Route [2] \n"); if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); #t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); #t_release(); } exit; } branch_route[2] { xlog("new branch at $ru\n"); } onreply_route[2] { xlog("incoming reply\n"); } failure_route[1] { if (t_was_cancelled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} # uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("192.168.2.100:5060"); ## append_branch(); ## # do not set the missed call flag again ## t_relay(); ##} } _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
