Hello, I have attached a whole trace as below. http://n2.nabble.com/file/n2818688/MAILING_10.10.2.5_ACK_sipp.log MAILING_10.10.2.5_ACK_sipp.log
Some IP as referenced in the above trace are as below: <Caller_IP> : IP address of Caller Gateway <Opensips_local_IP> : IP address of Opensips Server <Firewall_Public_IP> : IP address of Firewall <Called_IP> : IP address of provider Thanks, msp Bogdan-Andrei Iancu wrote: > > Hi, > > You need to post the whole trace (from the begining of the calls) to see > what the problem is. > > Regards, > Bogdan > > msp wrote: >> Hi all, >> >> My Opensips server is behind firewall. All the messages comes at port >> 5060 on firewall are routed to Opensips Server. Then calls are routed >> based on LCR. See below: >> >> Caller ===> | | >> | Firewall |<====> Opensips Server >> Callee <=== | | >> >> Currently calls are being routed properly from caller server to >> callee, but when Caller sends ACK in respond to callee 's 200-OK, >> Opensips doesn't route it back to Callee, and ACK message is sent to >> Opensips Server itself which creates loop. At the end Opensips server >> responds to Caller "483-Too many hops" as maximum hops reaches. >> >> Have any body done anything like this before. Let me know what should >> be missing or possible fault. >> >> thanks, >> msp. >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Users mailing list >> [email protected] >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > -- View this message in context: http://n2.nabble.com/ACK-message-loops-while-behind-firewall-tp2753844p2818688.html Sent from the OpenSIPS - Users mailing list archive at Nabble.com. _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
