I am storing the u...@domain for the client in the tag column of the trusted
table, so when I
authorize the IP I place the u...@domain information in the variables. Don't
know if I am doing
all the correct settings because I am a real newbie. But CDRTool is working
perfectly for post paid.
I am having an issue with not decrementing prepaid value and will be posting
this in a few minutes,
but I don't think its related to this IP issue.
Alberto
----- Original Message -----
From: Adrian Georgescu
To: Alberto Listas
Cc: DanB ; [email protected]
Sent: Thursday, July 23, 2009 7:20 AM
Subject: Re: [OpenSIPS-Users] CDRTool does not identify by IP origin from
OpenSips
CDRTool was designed to rate while using u...@domain format for SIP URIs.
IPs/hostnames only without username are not fully supported, something
somewhere will likely break as you have already noticed.
Adrian
On Jul 22, 2009, at 7:41 PM, Alberto Listas wrote:
Hi Dan,
Thanks for the info, the doc/Rating.txt is very good but
sometimes you need previous experience to understand
the details.
I was already using the param:
Source-IP=$avp(s:source_ip);
But I wasn't setting any values so the SourceIP column was blank.
I added a line to the cfg to set the value:
$avp(s:source_ip) = $si;
And now the rating identifies the origin by SourceIP
when the CallingStationId is in the form [email protected]
(and hence the domain is set to the IP of the source)
but when CallingStationId is in the form 1.1.1.1 (just the IP)
the Domain in the info of the call is blank and the rating does not work.
When the Domain is blank the rating engine use the profile
"Customer: [email protected]" from the default Customer
configuration of CDRTool. I suppose this is because this customer
has a blank domain field. But this is an error since it should use
the default profile instead.
Anyway, Thanks for your help, now it can rate by IP.
Cheers,
Alberto
----- Original Message -----
From: DanB
To: Alberto Listas
Cc: [email protected]
Sent: Wednesday, July 22, 2009 4:23 AM
Subject: Re: [OpenSIPS-Users] CDRTool does not identify by IP origin from
OpenSips
Hi Alberto,
By default CDRTool takes the gateway parameter out of Source IP (nicely
explained also in the doc/RATING.TXT) and if you don't modify the defaults, out
of radacct.SourceIP column.
In order to identify the gateway, you need to enforce that SourceIP
inside opensips script to whatever IP you want to be used as your gateway.
Example of params in opensips.cfg:
modparam("acc", "radius_extra", " Source-IP=$avp(s:mygtw)")
Another trick you can use is to write your own radius sql query which
places the SourceIP from another radius attribute received.
Cheers,
DanB
On Tue, Jul 21, 2009 at 9:44 PM, Alberto Listas <[email protected]> wrote:
Hi,
I am having a difficulty with the rating in CDRTool. When I telnet and
give this command:
ShowPrice From=sip:[email protected] To=sip:[email protected]
Gateway=10.0.0.4 Duration=30
(IPs where changed)
The rating engine identifies the customer by the gateway and rates
correctly.
When the call comes from the OpenSips it doesn't identify the customer
and uses
the default profile:
Start time: 2009-07-21 14:55:24
Stop time: 2009-07-21 14:55:59
Method:Invite from :
From:[email protected]
Domain:10.0.0.4
To (dialed URI):[email protected]
Canonical URI: [email protected]
Next hop URI:[email protected]
Destination: BRAZIL CELL (55218)
Billing Party:[email protected]
Reseller:
Duration: 35 s
App: audio
Destination: 55218
Customer: default
Connect: 0.0000 ......
Should I set some different variable to FreeRadius for it to identify
the GATEWAY?
Thanks,
Alberto
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
