Hi Jeremy , A bit strange what you describe there......
first of all, do you do any nat traversal processing in your script? or does your UA uses STUN ? Regards, Bogdan jerecell wrote: > Hi, > > The Contact address used by OpenSer (1.1.0) seems to be incorrect -- but > only when I REGISTER from a machine in the 192.168.1.x subnet. Note that my > topology is: > > user agent (192.168.1.14) <---> home router <----> internet <---> OpenSer > > For example, I see in the 200 OK to my REGISTER, req_src_ip=192.168.1.14 (in > the Warning header). Also, INVITEs sent *to* this endpoint have the private > 192.168.1.14 IP address as their target address (i.e. the first line) after > they pass through OpenSer. This causes calls to fail. However if I simply > change my home router to use 192.168.0.x as its subnet, then I see my public > IPs showing up in both places (and calls work). > > So this seems to be either a bug or a configuration issue. Does anyone have > any idea where to look first? > > Thanks, > Jeremy > -- Bogdan-Andrei Iancu www.voice-system.ro _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
