I still have a problem with binding all IP some headers do not have the IP set : Record-Route: <sip:0.0.0.0;lr;>. Via: SIP/2.0/UDP 0.0.0.0;branch=z9hG4bKfc58.1427b764.0. Is there a way to tell Opensip to use the routing source IP, or other alternative ?
________________________________ From: [email protected] on behalf of Julien Chavanton Sent: Tue 02/02/2010 1:44 PM To: OpenSIPS users mailling list; OpenSIPS users mailling list; OpenSIPS users mailling list Subject: Re: [OpenSIPS-Users] high-availability - senario This was well documented in opensips.cfg listen=udp:0.0.0.0:5060 or for both TCP/UDP listen=0.0.0.0:5060 ________________________________ From: [email protected] on behalf of Julien Chavanton Sent: Tue 02/02/2010 12:47 PM To: OpenSIPS users mailling list; OpenSIPS users mailling list Subject: Re: [OpenSIPS-Users] high-availability - senario I deceided not to use a loadbalancer because, the IP address for outbound call would have been different and we want it to be completely transparent for existing Interco. I went with heartbeat + mon I created sip.monitor When the fail over take effect it is not listening on the virtual IP, how do I configure opensips to bind to 0.0.0.0:5060 ? ________________________________ From: [email protected] on behalf of Nigel Daniels Sent: Tue 26/01/2010 11:45 PM To: OpenSIPS users mailling list Subject: Re: [OpenSIPS-Users] high-availability - senario have you considerd using keepalived with vrrp instead ? On Tue, Jan 26, 2010 at 7:03 AM, Julien Chavanton <[email protected]> wrote: I am configuring high-availability with heart-beat + LVS + ldirector I do not want to load balance but mostly make sure it will fail over quickly, I have found situation where the in LVS (UDP/TCP) connection never timeout when the remote IP send periodic OPTIONS request for example. I beleive I will have to set very low UDP/TCP time-out, however with such a low time-out I can not load-balance so I will use weighted Round-Robin with very high priority 65535 on the active one and weith 1 on the passive server. Any other suggested way to cluster without load-balancing ? _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users -- Nigel Daniels Network & Systems Administrator ConnectAndSell inc. (650)-533-2542
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
