Hi Albert,
Please, try this command : netstat -tlnp . See if opensips is listening
also on port 8000 (this should be the xmlrpc port - if this is what
you've set up in your opensips config)
and also see if monit is configured to listen on 127.0.0.1:2812. If this
info is not shown in the output of the command then in means something
is not working correctly.
Also see monit's config file : monitrc. See if it is set up to listen on
the same IP:PORT that you have set up in the OpensipsCP config
(boxes.global.inc.php)
Regards,
Alex
On 5/25/2010 15:31, Albert Paijmans wrote:
Hi,
I have some problems connecting to monit and mi
Installed xmlrpc (deb packages) and running monit -t gives an ok
Starting OpenSIPS gives an ok to.
But in the control panel I get these error messages:
Cannot connect to OpenSIPS Server via Management Interface
(127.0.0.1/8000 <http://127.0.0.1/8000>)
And cannot connect tot 127.0.0.1:2812 <http://127.0.0.1:2812> (monit
tool)
OpenSIPS seems to run and listening on udp ports for sip messages.
So I am missing something? Did the install for monit from the readme.
Thanks,
Albert
On Tue, May 25, 2010 at 10:43 AM, Aman <[email protected]
<mailto:[email protected]>> wrote:
Greetings,
Need a help, i am getting the error on monit on
OpenSIPS-CP that "I can't connect!", when i run
monit -t for syntax check, its shows error,
May 24 10:17:26 opensips monit: /etc/monit/monitrc:241: Warning:
include files not found '/etc/monit/conf.d/*'
May 24 10:50:49 opensips monit: /etc/monit/monitrc:241: Warning:
include files not found '/etc/monit/conf.d/*'
May 24 11:08:14 opensips monit: /etc/monit/monitrc:241: Warning:
include files not found '/etc/monit/conf.d/*'
But this file does not exist on defined path, i have also skipped
the following configuration part in 'monitrc'
" check process opensips with pidfile /var/run/opensips.pid
#Below is actions taken by monit when service got stuck.
start program = "/etc/init.d/opensips start"
stop program = "/etc/init.d/opensips stop"
# Admin will notify by mail if below of the condition satisfied.
if cpu is greater than 70% for 2 cycles then alert
if cpu > 90% for 5 cycles then restart "
as this shows error opensips already icluded, please advice to
make the monit work.
Any suggestions are really appreciable.
--
Amanpreet Singh
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
--
Alex Ionescu
www.voice-system.ro
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
