Hi Saul Thank you very much for the info and feedback.
I looked at ICE before, but was not able to successfully implement it. Then I did a search for 2 UAs behind same NAT device and came about info here: http://www.kamailio.org/dokuwiki/doku.php/examples:caller-callee-behind-same-nat and http://www.mail-archive.com/[email protected]/msg11197.html Thus leading me to the config I supplied. So you suggest I just change the use_mediaproxy to engage_mediaproxy? Should I remove if ( $dd == $si ) { xlog("L_INFO", "Both users behind same NAT, so we dont use MediaProxy\n"); resetbflag(6); # Unset NAT flag general. resetbflag(7); # Unset NAT flag general. } else Should I add modparams("mediaproxy","ice_candidate","low-priority") modparams("mediaproxy","ice_candidate_avp","$avp(s:ice_candidate)") Could you perhaps help me with a sample for the rest/correct configurations? I use X-lite and counterpath bria Professional as my SIP softphones. I guess for X-lite the Topology config should just be Auto-detect (ICE, recommended), for Bria Professional I should set "Use local IP", "(STUN) discover from server and Select Enable ICE. Thanks again. I really appreciate all the help and assistance. Best Regards Deon On 02 Nov 2010, at 8:15 PM, Saúl Ibarra Corretgé wrote: > On 11/02/2010 07:11 PM, Deon Vermeulen wrote: >> Hi Kennard >> >> Thanks for the ideas. >> I really appreciate it. >> >> I got the config as an example from the Building Telephony systems >> with OpenSER. >> I choose the OpenSER implementation as it describes the implenetation >> of MediaProxy. >> Reason for choosing MediaProxy is because I am very, very interested >> in getting the ICE feature. >> >> I thought best to first get this config working before playing around >> with the ICE configuration. >> >> Could you be so kind and perhaps show me where I should call up >> route(6)? >> >> I use fully qualified domain names (i.e domaina.com) for the domain. >> At the moment I specify the proxy with the IP of my Server as I >> haven't setup the DNS records yet. >> >> I really appreciate your feedback and assistance. >> > > Hi, > > If you are setting up OpenSIPS + MediaProxy for the first time, use > the > engage_mediaproxy function instead of the separated functions because > even if they provide more flexibility you'll most likely not need it > at > the moment (or on very rare cases). > > It will be a lot easier to get it working and test the ICE > functionality. > > > Regards, > > -- > Saúl Ibarra Corretgé > AG Projects > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
