Your problem may be caused by your network setup or particular configuration as the software can handle such small amount of calls without any problem. Upgrading the software will likely not help as you already noticed.
Adrian On Nov 3, 2010, at 8:12 AM, Krunal Patel wrote: > Hello, > > List of components with version: > > OpenSIPS 1.5.3 notls > call-control 2.0.6 > CDRTool 6.9.5 > FreeRADIUS 2.1.6 > > Current setup: > The platform is implemented to have prepaid & postpaid billing support with > prefix based routing using carrierroute. > call-control & opensips are installed on the same server. CDRTool & > FreeRADIUS are installed on the separate servers. > For calls from or to postpaid accounts, we are not sending request to > call-control. But when the account is prepaid, then opensips will send > request to call-control to set call limitation. > > Issue: > When there's more than 40 prepaid simultaneous calls, call-control introduces > delay in processing requests from opensips, which leads to PDD more than 10 > sec. As we set fr_timer to 10 seconds, opensips sends 408 Request Timeout. > We debug opensips & call-control code for the whole flow. > What we found is, call-control stores all requests from opensips to queue & > processes it one by one. When there's more than 40 calls, the queue > processing in call-control introduces delay. > Btw CDRTool responds within less than half a second for each request from > call-control. So we think there's something wrong with call-control, > basically in queue processing. > One more thing , we tried to upgrade call-control to 2.0.8 version. But it > didn't resolve the issue. > > Is anybody there who can help us out to resolve the issue, we would > appreciate the help. > > Regards, > Krunal Patel > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
