I've made a simple config, and openSIPS still crashes. Please see my config here http://pastebin.com/mfabxGJJ And please see a full log file http://pastebin.com/0VXQ6vwT
WBR, Anton Zagorskiy VoIP Developer, Oyster Telecom Phone.: +7 812 601-0666 Fax: +7 812 601-0593 [email protected] www.oyster-telecom.ru > -----Original Message----- > From: [email protected] [mailto:users- > [email protected]] On Behalf Of Anton Zagorskiy > Sent: Thursday, December 16, 2010 11:54 AM > To: 'OpenSIPS users mailling list' > Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b > > Hi! > > What about investigation my crash? > Should I send any additional information? > > > > > -----Original Message----- > > From: [email protected] [mailto:users- > > [email protected]] On Behalf Of Anton Zagorskiy > > Sent: Tuesday, December 14, 2010 5:01 PM > > To: 'OpenSIPS users mailling list' > > Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b > > > > Yes, openSIPS crashed because of there are "INFO:core:sig_usr: signal > > 15 received" messages in a log file. > > I've tested on new VM with CentOS 5.5 with sources from svn stable > > release > > > > Please see bt and bt full results in the attach. > > > > > > Code: > > > > route > > { > > [skipped] > > > > if (!do_routing()) > > { > > xlog("*** !!! route[invite]: No rules found for do_routing(). > > STOP"); > > send_reply("503", "Error"); > > exit; > > }; > > xlog("*** route[invite]: do_routing() passed"); > > xlog("*** route[invite]: dr_attrs: $avp(s:dr_attrs); ruri: > > $avp(s:dr_ruri)"); > > route(main_route); > > > > [skipped] > > } > > > > > > > > route[main_route] > > { > > xlog("*** +++ route[main_route] has started"); > > > > if (is_method("INVITE")) > > { > > t_on_branch("2"); > > t_on_reply("2"); > > t_on_failure("1"); > > }; > > > > if (!t_relay()) > > { > > sl_reply_error(); > > }; > > > > xlog("*** --- route[main_route] has finished"); } > > > > > > > > > > > > WBR, Anton Zagorskiy > > VoIP Developer, Oyster Telecom > > Phone.: +7 812 601-0666 > > Fax: +7 812 601-0593 > > [email protected] > > www.oyster-telecom.ru > > > > > > > -----Original Message----- > > > From: [email protected] [mailto:users- > > > [email protected]] On Behalf Of Bogdan-Andrei Iancu > > > Sent: Tuesday, December 14, 2010 4:25 PM > > > To: OpenSIPS users mailling list > > > Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b > > > > > > Hi Anton, > > > > > > Why do you say it crashes ? do you have a corefile ? > > > > > > your logs do not show any t_relay() after do_routing()....could you > > > post the relevant snip of your cfg? > > > > > > Regards, > > > Bogdan > > > > > > Anton Zagorskiy wrote: > > > > Hi! > > > > > > > > I'm trying to use drouting module, but something says to me that > I > > > using it > > > > wrong because openSIPS goes to crash. > > > > > > > > I've inserted following values in the DB: > > > > > > > > 1. dr_gateways: > > > > > > > > gwid(2) > > > > type(1) > > > > address(192.168.0.10) > > > > strip(0) > > > > pri_prefix(1000) > > > > attrs("") > > > > probe_mode(0) > > > > description(Gateway1) > > > > > > > > 2. dr_groups: > > > > id(1) > > > > username(100) > > > > domain(mydomain.com) > > > > groupid(1) > > > > description(All-Test) > > > > > > > > 3. dr_gw_lists: > > > > id(2) > > > > gwlist(2) > > > > description(Test) > > > > > > > > 4. dr_rules: > > > > ruleid(1) > > > > groupid(1) > > > > prefix(89112599077) > > > > timerec("") > > > > priority(1) > > > > routeid("") > > > > gwlist(#2) > > > > description(Test) > > > > attrs("") > > > > > > > > > > > > So, I'm calling from [email protected] to 89112599077. > > > > I'm expecting that this will be routed to 192.168.0.10 with R-URI > > > > 100089112599...@.. Right? > > > > > > > > But when I'm calling do_routing() the same INVITE is passed to > the > > > main > > > > route block and I'm again calling do_routing (Nothing changed in > > the > > > script > > > > :)) and opensips is crashing... > > > > > > > > Log file hasn't helpful messages: > > > > > > > > [8031]: *** route[invite]: call do_routing() > > > > [8031]: DBG:core:db_new_result: allocate 28 bytes for result set > at > > > > 0x81ddb78 > > > > [8031]: DBG:db_mysql:db_mysql_get_columns: 1 columns returned > from > > > the query > > > > [8031]: DBG:core:db_allocate_columns: allocate 16 bytes for > result > > > columns > > > > at 0x81ddba4 > > > > [8031]: DBG:db_mysql:db_mysql_get_columns: > > > RES_NAMES(0x81ddba8)[0]=[groupid] > > > > [8031]: DBG:db_mysql:db_mysql_get_columns: use DB_INT result type > > > > [8031]: DBG:core:db_allocate_rows: allocate 28 bytes for result > > rows > > > and > > > > values at 0x81ddbd0 > > > > [8031]: DBG:db_mysql:db_mysql_str2val: converting INT [1] > > > > [8031]: DBG:core:db_free_columns: freeing result columns at > > > > 0x81ddba4 > > > > [8031]: DBG:core:db_free_rows: freeing 1 rows > > > > [8031]: DBG:core:db_free_row: freeing row values at 0x81ddbd8 > > > > [8031]: DBG:core:db_free_rows: freeing rows at 0x81ddbd0 > > > > [8031]: DBG:core:db_free_result: freeing result set at 0x81ddb78 > > > > [8031]: DBG:drouting:do_routing: using dr group 1 > > > > [8031]: DBG:drouting:internal_check_rt: found rgid 1 (rule list > > > 0xb60c0d0c) > > > > [8034]: DBG:tm:utimer_routine: timer routine:4,tl=0xb60c34b4 > > > next=(nil), > > > > timeout=11900000 > > > > [8034]: DBG:tm:retransmission_handler: retransmission_handler : > > > request > > > > resending (t=0xb60c3368, INVITE si ... ) > > > > [8034]: DBG:tm:set_timer: relative timeout is 2000000 > > > > [8034]: DBG:tm:insert_timer_unsafe: [5]: 0xb60c34b4 (13900000) > > > > [8034]: DBG:tm:retransmission_handler: retransmission_handler : > > done > > > > [8032]: DBG:core:parse_msg: SIP Request: > > > > [8032]: DBG:core:parse_msg: method: <INVITE> (# The same INVITE > > is > > > > coming!) > > > > > > > > What I'm doing wrong? > > > > > > > > > > > > > > > > > _______________________________________________ > > > Users mailing list > > > [email protected] > > > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
