Hi Danny,
There is something wrong with your cfg - you are sending 2 final replies
(403 and 401) to a single request. As the first is the 403, the default
behaviour for an UAC is to do nothing.
Re-try with credentials is done only for 401/407.
So fix your script and take out that 403 for the REGISTER.
Regards,
Bogdan
Danny Dias wrote:
Thanks Jose,
I've changed some parameters into my UAC and now they have the rport
parameter and opensips is now sending the response to the right
IP:PORT...the problem is that the UAC never answer with the new
REGISTER, take a look:
#
U 2010/12/15 14:38:35.256795 95.22.68.138:38318 -> 212.230.19.191:5060
REGISTER sip:212.230.19.191 SIP/2.0'
Via: SIP/2.0/UDP 192.168.1.15:5070;branch=z9hG4bK-72e3efa3;rport'
From: "1002" <sip:[email protected]>;tag=e00120622626c16co0'
To: "1002" <sip:[email protected]>'
Call-ID: [email protected]'
CSeq: 54050 REGISTER'
Max-Forwards: 70'
Contact: "1002" <sip:[email protected]:5070>;expires=3600'
User-Agent: Linksys/SPA942-5.2.5(a)'
Content-Length: 0'
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER'
Supported: replaces'
'
#
U 2010/12/15 14:38:35.256795 212.230.19.191:5060 -> 95.22.68.138:38318
SIP/2.0 403 Not Here'
Via: SIP/2.0/UDP
192.168.1.15:5070;branch=z9hG4bK-72e3efa3;rport=38318;received=95.22.68.138'
From: "1002" <sip:[email protected]>;tag=e00120622626c16co0'
To: "1002" <sip:[email protected]>;tag=1b47e1bbb59b4fcc885b2040cbaae1a6.772d'
Call-ID: [email protected]'
CSeq: 54050 REGISTER'
Server: OpenSIPS (1.6.3-notls (x86_64/linux))'
Content-Length: 0'
'
#
U 2010/12/15 14:38:35.256795 212.230.19.191:5060 -> 95.22.68.138:38318
SIP/2.0 401 Unauthorized'
Via: SIP/2.0/UDP
192.168.1.15:5070;branch=z9hG4bK-72e3efa3;rport=38318;received=95.22.68.138'
From: "1002" <sip:[email protected]>;tag=e00120622626c16co0'
To: "1002" <sip:[email protected]>;tag=1b47e1bbb59b4fcc885b2040cbaae1a6.772d'
Call-ID: [email protected]'
CSeq: 54050 REGISTER'
....
2010/12/15 jose luis millan <[email protected]>:
There is no rport parameter in the request's via header field.
On Wed, Dec 15, 2010 at 10:45 AM, Danny Dias <[email protected]> wrote:
Hello,
Attached you will find a sip trace of my problem, as you can see,
OpenSIPS is answering to the public IP (that's ok) but not to the
public port, instead it sends the answer to the port of the contact,
obviously, the 401 doesn't reach the UAc and that's why it doesn't
resend the REGISTER with the "Authorization" header...What should i
check in my opensips.cfg?
Thanks in advance
--
Ing. Danny Dias
www.DannTEL.net
--
Ing. Danny Dias
www.DannTEL.net
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
--
Bogdan-Andrei Iancu
OpenSIPS Event - expo, conf, social, bootcamp
2 - 4 February 2011, ITExpo, Miami, USA
www.voice-system.ro
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
