Jeff, Thanks for your response.
It's for our wifi network and i know for a fact they expect 5 & 6, i checked that to be sure. I'll take a look at your links. Thank you! Peter On Mon, Feb 28, 2011 at 4:53 PM, Jeff Pyle <[email protected]> wrote: > Peter, > > Additionally, and slightly off list topic… If there's a standard, I would > suspect it's AF31 for SIP (0x68) and EF for RTP (0xb8). I've seen several > gateway manufacturers' equipment use these values by default. CS6 and CS7 > are generally reserved for network operations only. I haven't done any > research to see if there is anything official to this. > > > - Jeff > > > From: Jeff Pyle <[email protected]> > > Reply-To: OpenSIPS users mailling list <[email protected]> > Date: Mon, 28 Feb 2011 10:50:03 -0500 > > To: OpenSIPS users mailling list <[email protected]> > Subject: Re: [OpenSIPS-Users] QoS/ToS Opensips > > Peter, > > See the "tos" option to set SIP ToS values: > http://www.opensips.org/Resources/DocsCoreFcn16#toc89 > > A CS5 value would be tos=0xa0 I believe. EF may be a more compatible value > (0xb8), and it will also be detected as CS5. Here's a great QoS cheatsheet: > http://packetlife.net/media/library/19/QoS.pdf > > Opensips does not handle RTP, so there is no relevant setting. > > > - Jeff > > > From: Peter den Hartog <[email protected]> > Reply-To: OpenSIPS users mailling list <[email protected]> > Date: Mon, 28 Feb 2011 10:42:38 -0500 > To: OpenSIPS users mailling list <[email protected]> > Subject: [OpenSIPS-Users] QoS/ToS Opensips > > Is there a way to set these values for Opensips? > I would like to use CS5 for signaling and CS6 for RTP/Voice. > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > >
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
