Duong, Yea missed that. :-) To check basic CP connection to opensips, go to System, MI Commands. In box under Execute MI Command, put "ps" and click "execute". It should show a bunch of lines about the opensips processes that are running.
As far as showing Online Users, it may be using presence module/table rather than active registrations to qualify a user as "online". Someone else will have to answer that or you can look at the CP source code for that answer. Dave On Wed, Mar 23, 2011 at 12:35 PM, Duong Manh Truong <[email protected]> wrote: > Thank David, > But i found that in my opensips.cfg file: > " > # ----- usrloc params ----- > # modparam("usrloc", "db_mode", 0) > /* uncomment the following lines if you want to enable DB persistency > for location entries */ > modparam("usrloc", "db_mode", 2) > modparam("usrloc", "db_url", > "mysql://opensips:opensipsrw@localhost/opensips") > " > So i think that my "db_mode" is not the cause of my failed CP > " 2 - Write-Back scheme. This is a combination of previous two schemes. All > changes are made to memory and database synchronization is done in the > timer. The timer deletes all expired contacts and flushes all modified or > new contacts to database. Use this scheme if you encounter high-load peaks > and want them to process as fast as possible. The mode will not help at all > if the load is high all the time. Also, latency of this mode is much lower > than latency of mode 1, but slightly higher than latency of mode 0." > My CP still does not work :-( , even the simple function like "show online > user" --- "no data found" > (While checking by using opensipsctl is ok) > opensipsctl online > database engine 'MYSQL' loaded > Control engine 'FIFO' loaded > 1001 > > Please tell me how to check my CP and its connection to Opensips server? > Thanks ! > > > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 22 Mar 2011 21:06:21 -0700 > From: Dave Singer <[email protected]> > Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not take > effect into Opensips Server > To: OpenSIPS users mailling list <[email protected]> > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > The key I think is usrloc db mode is 0, which means db is not used. > http://www.opensips.org/html/docs/modules/1.6.x/usrloc.html#id292029 > > On Tue, Mar 22, 2011 at 6:47 PM, Duong Manh Truong > <[email protected]> wrote: >> Dear Dave! >> Thanks for your help. >> I've checked the opensips.cfg again but i still can not find out what >> stuff >> is incorrect ! :-( >> I attached my config file in this email, hope that will help my problem to >> be?clearer! >> If anyone has had the same issue, please tell me how can i check or fix >> it. >> (Hope to receive relatively specific informations) >> Thanks and Best Regards. >> >> >> >> Date: Mon, 21 Mar 2011 08:45:03 -0700 >> From: Dave Singer <[email protected]> >> Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not take >> ? ? ? ?effect into Opensips Server >> To: OpenSIPS users mailling list <[email protected]> >> Message-ID: >> ? ? ? ?<[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> Duong, >> >> Some modules, like drouting, you have to click a reload module button >> in the control pannel. >> However, I think your problem is that you haven't implemented the >> needed stuff in opensips.cfg script. >> CP only provides an interface to managing/accessing the databases >> tables. You still have to impliment the logic in opensips.cfg. >> >> Dave >> >> On Sat, Mar 19, 2011 at 3:04 AM, Duong Manh Truong >> <[email protected]> wrote: >>> Hi all, >>> I have followed all instructions about Opensips CP installations >>> After done all configurations, the Web interface is appeared >>> but unfortunately, when i use modules in this interfaces, it seems there >>> is >>> no connection between Opensips CP and Opensips Server Core! >>> Take add/manage users module as an example: I registered user 1001, then >>> i >>> selected this module to show online users >>> => But the result was "no data found" :-( >>> I've created opensips database, correctly insert parameters to opensips >>> CP >>> config files (including mysql user/pass to connect to opensips database) >>> No error found ! >>> But i still can not use Opensips CP, someone help me to figure out why >>> Opensips CP has no effect ?? >>> Do i misconfig ?(or forget to config) some important parameters to make >>> Opensips CP connect properly to Opensips Server Core? >>> (Something likes authentications........etc) >>> Thanks a lot! >>> _______________________________________________ >>> Users mailing list >>>[email protected] >>>?http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>> >>> >> >> >> >> _______________________________________________ >> Users mailing list >> [email protected] >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
