Hello
Yes.
It's my config.
Thanks for your support.
Nick
On 2011?12?13? 14:35, Schneur Rosenberg wrote:
Did u do record_route() on initial invite?
On Dec 13, 2011 8:02 AM, "Nick" <[email protected]
<mailto:[email protected]>> wrote:
Hello
I used ngrep .
U 220.130.6.180:55260 <http://220.130.6.180:55260> ->
192.168.20.118:5060 <http://192.168.20.118:5060>
BYE sip:[email protected]:17882 <http://sip:[email protected]:17882>
SIP/2.0.
Via: SIP/2.0/UDP 192.168.20.153:55260;branch=z9hG4bK1489712528;rport.
From: <sip:[email protected]
<mailto:sip%[email protected]>>;tag=1735203887.
To: "Tony-opensips"<sip:[email protected]
<mailto:sip%[email protected]>>;tag=2e7b1572.
Call-ID: ZDgzYzY5NjcxY2UzYmU0YzkwMWUzZWFiODA4NzlmY2I..
CSeq: 859463759 BYE.
Content-Length: 0.
Max-Forwards: 70.
Accept-Contact: *;+g.oma.sip-im.
Accept-Contact: *;language="en,fr".
Accept-Contact:
*;+g.3gpp.icsi-ref="urn%3Aurn-7%3A3gpp-service.ims.icsi.mmtel".
Route: <sip:192.168.20.118;lr;did=827.ee7aaf17>.
Accept-Contact:
*;+g.3gpp.icsi-ref="urn%3Aurn-7%3A3gpp-service.ims.icsi.mmtel".
P-Preferred-Service: urn:urn-7:3gpp-service.ims.icsi.mmtel.
Allow: INVITE, ACK, CANCEL, BYE, MESSAGE, OPTIONS, NOTIFY, PRACK,
UPDATE, REFER.
Privacy: none.
P-Access-Network-Info: ADSL;utran-cell-id-3gpp=00000000.
User-Agent: IM-client/OMA1.0 ios-ngn-stack/v00 (doubango r000).
P-Preferred-Identity: <sip:[email protected]
<mailto:sip%[email protected]>>.
.
U 192.168.20.118:5060 <http://192.168.20.118:5060> ->
220.130.6.180:55260 <http://220.130.6.180:55260>
SIP/2.0 404 Not here.
Via: SIP/2.0/UDP
192.168.20.153:55260;received=220.130.6.180;branch=z9hG4bK1489712528;rport=55260.
From: <sip:[email protected]
<mailto:sip%[email protected]>>;tag=1735203887.
To: "Tony-opensips"<sip:[email protected]
<mailto:sip%[email protected]>>;tag=2e7b1572.
Call-ID: ZDgzYzY5NjcxY2UzYmU0YzkwMWUzZWFiODA4NzlmY2I..
CSeq: 859463759 BYE.
Server: OpenSIPS (1.7.0-tls (i386/linux)).
Content-Length: 0.
When 118 send BYE to Server.
But Server tell 118 " Not Here".
It's my config for BYE
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the
transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is
useless, do RR for
# re-INVITEs alos, as some buggy
clients do change route set
# during the dialog.
record_route();
}
# route it out to whatever destination was
set by loose_route()
# in $du (destination URI).
route(1);
} else {
/* uncomment the following lines if you
want to enable presence */
if (is_method("SUBSCRIBE") && $rd ==
"192.168.20.118") {
# in-dialog subscribe requests
route(presence_handling);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but
stateful ACK; must be an ACK after
# a 487 or e.g. 404 from
upstream server
t_relay();
exit;
} else {
# ACK without matching
transaction ->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
Why is Not here??
Can everyone help me? Thanks
Nick
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
#
# $Id: opensips.cfg 8141 2011-07-08 12:17:13Z vladut-paiu $
#
# OpenSIPS basic configuration script
# by Anca Vamanu <[email protected]>
#
# Please refer to the Core CookBook at:
# http://www.opensips.org/Resources/DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#
####### Global Parameters #########
debug=3
log_stderror=no
log_facility=LOG_LOCAL0
fork=yes
children=4
alias=220.130.6.180
/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes
/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes
/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes
/* uncomment the next line to disable the auto discovery of local aliases
based on revers DNS on IPs (default on) */
#auto_aliases=no
/* uncomment the following lines to enable TLS support (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"
# default db_url to be used by modules requiring DB connection
db_default_url="mysql://opensips:opensipsrw@localhost/Titan"
port=5060
/* uncomment and configure the following line if you want opensips to
bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:192.168.1.2:5060
####### Modules Section ########
#set module path
mpath="/usr/local/lib/opensips/modules/"
/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "mi_datagram.so"
loadmodule "uri.so"
loadmodule "acc.so"
loadmodule "uac_auth.so"
/* uncomment next lines for MySQL based authentication support
NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
NOTE: a DB (like db_mysql) module must be also loaded
NOTE: be sure and enable multi-domain support in all used modules
(see "multi-module params" section ) */
loadmodule "domain.so"
/* uncomment the next two lines for presence server support
NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "group.so"
loadmodule "drouting.so"
loadmodule "avpops.so"
#loadmodule "mi_xmlrpc.so"
loadmodule "dialplan.so"
loadmodule "dialog.so"
loadmodule "rtpproxy.so"
loadmodule "nathelper.so"
loadmodule "call_control.so"
loadmodule "siptrace.so"
loadmodule "aaa_radius.so"
loadmodule "sst.so"
# ----------------- setting module-specific parameters ---------------
#modparam("dialog", "default_timeout", 5)
modparam("dialog", "timeout_avp", "$avp(i:10)")
# Set the sst modules timeout_avp to be the same value
modparam("sst", "timeout_avp", "$avp(i:10)")
modparam("sst", "sst_flag", 6)
modparam("sst", "min_se", 90)
modparam("sst", "sst_interval", 30)
modparam("registrar","received_avp", "$avp(i:42)")
modparam("nathelper","received_avp", "$avp(i:42)")
modparam("usrloc","nat_bflag",6)
#modparam("rtpproxy","rtpproxy_sock","udp:127.0.0.1:19999")
modparam("nathelper","natping_interval",5)
modparam("nathelper","ping_nated_only",1)
modparam("nathelper","sipping_bflag",7)
modparam("nathelper","sipping_from","sip:[email protected]:5060")
modparam("rtpproxy", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
# ----- rr params -----
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- registrar params -----
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# ----- usrloc params -----
#modparam("usrloc", "db_mode", 0)
/* uncomment the following lines if you want to enable DB persistency
for location entries */
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
# ----- uri params -----
modparam("uri", "use_uri_table", 0)
# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
modparam("acc", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
modparam("acc", "db_extra", "caller_id=$avp(caller);callee_id=$avp(callee)")
modparam("aaa_radius", "radius_config", "/etc/raddb/client.conf")
modparam("acc", "aaa_flag", 1)
modparam("acc", "aaa_missed_flag", 1)
modparam("acc", "aaa_extra", "User-Name=$Au; \
Calling-Station-Id=$from; \
Called-Station-Id=$to; \
Sip-Translated-Request-URI=$ru; \
Sip-RPid=$avp(s:rpid); \
Source-IP=$avp(s:source_ip); \
Source-Port=$avp(s:source_port); \
SIP-Proxy-IP=$avp(s:sip_proxy_ip); \
Canonical-URI=$avp(s:can_uri); \
Billing-Party=$avp(billing_party); \
Divert-Reason=$avp(s:divert_reason); \
User-Agent=$hdr(user-agent); \
Contact=$hdr(contact); \
Event=$hdr(event); \
ENUM-TLD=$avp(s:enum_tld); \
From-Header=$hdr(from); \
SIP-Application-Type=$avp(s:sip_application_type)")
modparam("siptrace", "db_url", "mysql://opensips:opensipsrw@localhost/Titan")
modparam("siptrace", "traced_user_avp", "$avp(s:traced_user)")
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_flag", 2)
# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
aliases */
modparam("alias_db", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
support */
modparam("domain", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
modparam("domain", "db_mode", 1) # Use caching
# ----- group parameters ---- #
modparam("group", "use_domain", 1)
modparam("group", "table", "grp")
modparam("group", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
in the modules (dafault off) */
modparam("auth_db|usrloc|uri", "use_domain", 1)
# ----- drouting params -----
modparam("drouting", "use_domain", 1)
modparam("drouting","db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
# ---- dialplan params ----
modparam("auth_db", "load_credentials", "")
modparam("dialplan", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
## attribute of the matched line will be store in the $avp(dest)
modparam("dialplan", "attrs_pvar", "$avp(dest)")
#------ avpops params -----
modparam("avpops", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
modparam("avpops", "avp_table", "usr_preferences")
#------ tm params ----
modparam("tm", "fr_inv_timer",20)
modparam("tm", "fr_timer", 5)
# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
modparam("presence|presence_xml", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address", "sip:192.168.20.118:5090")
# ----- presence params -----
modparam("dialog", "db_url",
"mysql://opensips:opensipsrw@localhost/Titan")
modparam("dialog", "dlg_match_mode", 1)
modparam("dialog", "db_mode", 1)
# ----- call control params ----
modparam("call_control", "disable", 0)
# ----- mi_datagram params -----
modparam("mi_datagram", "socket_name", "/var/run/opensips.sock")
####### Routing Logic ########
# main request routing logic
route{
$avp(caller) = $fu;
xlog("ROUTE BEGIN $fu");
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
#---- NAT Detection ----#
force_rport();
if (nat_uac_test("19")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else {
fix_nated_contact();
#---- Insert nat=yes at the end of the Contact header
----#
#---- This helps with REINVITEs,
----#
#--- nat=yes will be included in the R-URI for
sequential requests ---#
#search_append('Contact:.*sip:[^>[:cntrl:]]*',
';nat=yes');
}
setflag(5);
}
#---- Sequential requests section ----#
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless, do
RR for
# re-INVITEs alos, as some buggy clients do
change route set
# during the dialog.
record_route();
}
# route it out to whatever destination was set by
loose_route()
# in $du (destination URI).
route(1);
} else {
/* uncomment the following lines if you want to enable
presence */
if (is_method("SUBSCRIBE") && $rd == "192.168.20.118") {
# in-dialog subscribe requests
route(presence_handling);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK;
must be an ACK after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#initial requests
# CANCEL processing
if (is_method("CANCEL"))
{
xlog("CANCEL METHOD CALLED");
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
#---- check request relaying ----#
if ( !is_from_local() && !is_uri_host_local() ) {
send_reply("403","No relaying");
exit;
}
# authenticate if from local subscriber (uncomment to enable auth)
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain
version*/
if (!is_method("REGISTER") && is_from_local()) /*multidomain version*/
{
if(!is_from_gw())
{
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (!db_check_from()) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
consume_credentials();
}
# caller authenticated
}
# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE") && !has_totag()) {
setflag(1); # do accounting
$avp(caller) = $fu;
create_dialog("BPp");
call_control();
$var(cc_retcode) = $retcode;
switch ($var(cc_retcode)) {
case 2:
# Call with no limit
case 1:
# Call with a limit under callcontrol management (either
prepaid or postpaid)
break;
case -1:
# Not enough credit (prepaid call)
xlog("L_INFO", "Call control: not enough credit for prepaid
call\n");
sl_send_reply("402", "Not enough credit");
exit;
break;
case -2:
# Locked by call in progress (prepaid call)
xlog("L_INFO", "Call control: prepaid call locked by
another call in progress\n");
sl_send_reply("403", "Call locked by another call in
progress");
exit;
break;
case -3:
# Duplicated callid
xlog("L_INFO", "Call control: Duplicated call id\n");
sl_send_reply("400", "Duplicated callid");
exit;
break;
case -4:
# Call limit reached
xlog("L_INFO", "Call control: Call limit reached\n");
sl_send_reply("503", "Too many concurrent calls");
exit;
break;
default:
# Internal error (message parsing, communication, ...)
xlog("L_INFO", "Call control: internal server error\n");
sl_send_reply("500", "Internal server error");
exit;
}
}
##if (!uri==myself)
## replace with following line if multi-domain support is used
if (!is_uri_host_local())
{
##append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
$avp(callee) = $ru;
route(1);
exit;
}
# requests for my domain
## uncomment this if you want to enable presence server
## and comment the next 'if' block
## NOTE: uncomment also the definition of route[2] from below
if( is_method("PUBLISH|SUBSCRIBE"))
{
route(presence_handling);
exit;
}
# if (is_method("PUBLISH"))
# {
# sl_send_reply("503", "Service Unavailable");
# exit;
# }
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}
if (!db_check_to())
{
sl_send_reply("403","Forbidden auth ID");
exit;
}
#---- Request is behind NAT(flag5) save with bflag 6 ----#
#---- Use bflag 7 to start SIP pinging (Options) ----#
if (isflagset(5)) {
setbflag(6);
setbflag(7);
};
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# apply DB based aliases (uncomment to enable)
alias_db_lookup("dbaliases");
#--- handle local numbers ----#
if(!dp_translate("0","$ruri.user/$ruri.user")){
send_reply("420", "Invalid Destination");
exit;
}
xlog("$avp(dest)");
$avp(callee) = $ru;
if ($avp(dest)=="usrloc") {
#Route to usrloc
route(user_location);
}
# if ($avp(dest)=="pstn") {
# #route to pstn
# route(pstn_routing);
# }
#
if ($avp(dest)=="media") {
#route to media server
route(media_routing);
}
send_reply("420", "Invalid Extension");
exit;
}
route[1] {
$avp(caller) = $fu;
xlog("ROUTE 1 $fu");
# for INVITEs enable some additional helper routes
#---- Helper route, if nat=yes in the R-URI set flag 6 ----#
#---- This is used to Process REINVITES ----#
if (subst_uri('/((sip:.*)||(sip:.*:.*));nat=yes/\1/')){
setbflag(6);
};
#---- If caller(flag 5) or callee(flag 6) are behind NAT ---#
#---- Call the route(6) to force the use of the RTP Proxy ---#
if (isflagset(5)||isbflagset(6)) {
route(nat_fixups);
};
if (!t_relay()) {
sl_reply_error();
};
exit;
}
route[user_location]{
xlog("ROUTE USER LOCATION");
if (!lookup("location", "m")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
send_reply("404", "Not Found");
exit;
case -2:
send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2); # Account missed calls
t_on_failure("user_failure");
route(1);
}
route[nat_fixups] {
xlog("ROUTE NAT_FIXUPS");
#---- RTP Proxy handling ---#
if (is_method("BYE|CANCEL")) {
unforce_rtp_proxy();
} else if (is_method("INVITE")){
#---- Activates the RTP Proxy for the CALLEE ---#
rtpproxy_offer();
t_on_failure("user_failure");
};
# catch and fix replies
t_on_reply("2");
}
# Presence route
/* uncomment the whole following route for enabling presence
NOTE: do not forget to enable the call of this route from the main
route */
route[presence_handling]
{
xlog("HANDLING PRESENCE");
if (!t_newtran())
{
sl_reply_error();
exit;
};
if(is_method("PUBLISH"))
{
handle_publish();
}
else
if( is_method("SUBSCRIBE"))
{
handle_subscribe();
}
exit;
}
route[media_routing] {
xlog("MEDIA ROUTING");
#---- Route to media servers ----#
#xlog("route to media servers");
rewritehostport("192.168.20.118:5080");
route(1);
}
branch_route[2] {
xlog("new branch at $ru\n");
}
# CANCEL and BYE Message Handling
# ----------------------------------
#route[4]{
#xlog("ROUTE 4");
# setflag(7);
# force_rport();
# fix_nated_contact();
# exit;
#}
onreply_route[2] {
# xlog("incoming reply\n");
xlog("ONREPLY ROUTE 2");
# if (is_method ( "BYE|CANCEL")) {
# route(4);
# }
#---- Handling of the SDP for the 200 or 183 reply ----#
#---- If behind nat (flags 5 or 6) start RTP Proxy ----#
#---- Activates the RTP Proxy for the CALLER ----#
if ( is_method("INVITE") &&
(isflagset(5) || isbflagset(6)) &&
has_body("application/sdp") ){
rtpproxy_answer();
}
if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])"){
#force_rtp_proxy();
append_hf("P-hint: onreply_route|force_rtp_proxy \r\n");
}
#---- If the CALLEE is behind NAT, fix the CONTACT HF ----#
if (isbflagset(6)) {
search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
fix_nated_contact();
}
exit;
}
failure_route[user_failure] {
xlog("FAIL USER ROUTE");
#---- If a failure has ocurred, deactivate the RTP Proxy ----#
if (isflagset(5) || isbflagset(6)){
unforce_rtp_proxy();
}
if (t_was_cancelled()) {
xlog("FAIL USER ROUTE CANCEL");
exit;
}
if ( db_is_user_in("from","voicemail") ) {
# Redirect busy calls to a media server
$ru = $avp(callee);
sethostport("192.168.20.118:5080");
t_relay();
}
}
#failure_route[miss_call] {
#Miss Call Status check fail route
##if (t_check_status("480|408")) {
## sethostport("192.168.2.100:5060");
## # do not set the missed call flag again
## t_relay();
##}
#}
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
