Hey, considering that you get free help, culminating with the fact you
have almost 0 knowledge in basic stuff (like making a simple network
capture), I would not complain AT ALL about taking too long. So please
be at least grateful for the help you get.
The problem is your setup - to spare some time, you should mention that
you actually run opensips behind NAT and you receive traffic from public
internet. OpenSIPS is adding a RR header with a private IP which is not
routable from the caller side (public internet), so caller cannot fire
the ACK as response to the received 200 OK.
So, your setup is bogus.
Regards,
Bogdan
On 03/16/2012 04:40 PM, talha jilal wrote:
Hi,
Here you find output ,
http://pastebin.com/ivWcFaXi
Thanks for your help, can I get reply soon. Its taking too long.
Thanks !
------------------------------------------------------------------------
Date: Fri, 16 Mar 2012 13:52:36 +0200
From: [email protected]
To: [email protected]
CC: [email protected]
Subject: Re: Users Digest, Vol 44, Issue 25
Hi,
To get ngrep to filter the capturing on "300" do :
ngrep -d any -W byline -t *300* port 5060
upload the output somewhere on pastebin or similar - this mailing list
is limited to attachments of 40K.
Regards,
Bogdan
On 03/15/2012 04:54 PM, talha jilal wrote:
Hello Bogdan,
Here is my ngrep output, for only 300 extension where I am
calling. I also attached ngrep full out put from when I start
calling till end.
To: <sip:[email protected];user=phone>;tag=4249013220.
Contact: "300" <sip:[email protected]:5060;transport=udp>.
i="300"<sip:>.
a=X-NameLabel:300.
To: <sip:[email protected];user=phone>;tag=4249013220.
Contact: "300" <sip:[email protected]:5060;transport=udp>.
i="300"<sip:>.
^C
*
*
*
*
*Thanks !
Talha Jilal
*
------------------------------------------------------------------------
Date: Wed, 14 Mar 2012 14:22:23 +0200
From: [email protected] <mailto:[email protected]>
To: [email protected] <mailto:[email protected]>
CC: [email protected] <mailto:[email protected]>
Subject: Re: Users Digest, Vol 44, Issue 25
I mentioned ngrep, not grep :D .
Do :
ngrep -d any -W byline -t . port 5060
Regards,
Bogdan
On 03/12/2012 08:54 PM, talha jilal wrote:
Hi,
Here is output with grep
Please advise me full command if I am doing some thing wrong,
I am using centos 6.0 32 bit.
-bash-4.1# tcpdump -i eth2 -n -s0 -vvv tcp port 5060 | grep 300
tcpdump: listening on eth2, link-type EN10MB (Ethernet),
capture size 65535 bytes
07:51:21.257355 IP (tos 0x0, ttl 118, id 27728, offset 0,
flags [DF], proto TCP (6), length 1300)
07:51:27.511152 IP (tos 0x10, ttl 64, id 6173, offset 0, flags
[DF], proto TCP (6), length 1300)
07:51:28.015258 IP (tos 0x10, ttl 64, id 6175, offset 0, flags
[DF], proto TCP (6), length 1300)
07:51:29.022329 IP (tos 0x10, ttl 64, id 6177, offset 0, flags
[DF], proto TCP (6), length 1300)
Thanks
------------------------------------------------------------------------
Date: Mon, 12 Mar 2012 20:30:10 +0200
From: [email protected] <mailto:[email protected]>
To: [email protected] <mailto:[email protected]>;
[email protected] <mailto:[email protected]>
Subject: Re: Users Digest, Vol 44, Issue 25
Hi,
1) please keep the list at CC all the time !
2) the tcpdump output is no enough - use ngrep as I need to
see the actual content of the SIP package ; or make a pcap
capture and upload it somewhere for download.
Regards,
Bogdan
--
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
--
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
