Hi Andrew, Thanks you very much for your Reply.
Yes, I have indeed tried the patch from the link but I was not able to connect calls with my wifi connections. I was also getting the following error, when I used the patch, # INFO:handle_command: lookup request failed: session 1617348899, tags 896913887;1/766887591;1 not found # ERROR:nathelper:force_rtp_proxy_body: incorrect port 0 in reply from rtp proxy Does this error mean that thr rtp proxy is unable to communicate back to the openSIP Server? Is the issue resolvable? Thanks, Arjun ----- Original Message ----- From: "Andrew Pogrebennyk" <[email protected]> To: "OpenSIPS users mailling list" <[email protected]> Cc: "Arjun Shankar K S" <[email protected]> Sent: Friday, June 1, 2012 5:44:09 PM GMT +05:30 Chennai, Kolkata, Mumbai, New Delhi Subject: Re: [OpenSIPS-Users] RTP Proxy Between Public and Private IPs Arjun, I'm not sure if running rtpproxy behind NAT is a good idea, but there is a patch on internet for adding "advertised address" setting to rtpproxy: http://opensips-open-sip-server.1449251.n2.nabble.com/Rtpproxy-behind-the-NAT-td5008041.html I've used it ok for some experiment. Also I can suggest looking at Sipwise sip:provider, which supports advertised_address setting for both signaling and RTP out of the box. If you are looking for paid support for setting up a RTP proxy behind a NAT, please contact me off list. Good luck. Andrew On 06/01/2012 11:16 AM, Arjun Shankar K S wrote: > Hi All, > > Greeting to everyone!! > > I have openSIPS installed successfully behind NAT. I am facing issues in > setting up RTP Proxy in the same network where we have a Public IP and > an Private IP. > > I have configured RTP Proxy V1.2.0 in the same machine as openSIPS which > has an internal IP as 10.196.15.212 and I have started the RTP Proxy > using the following command, > > ./rtpproxy -l PublicIP/10.196.15.212 -s udp:127.0.0.1:7890 -F > > I am still facing issue where the Call do not get established properly > due to improper NAT Traversal. Can anybody provide some support in > setting up a RTP proxy behind a NAT. > > Any help is sincerely appreciated. > > Thanks, > Arjun >
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
