Hello, Arjun!
Are you sure rtpproxy is running and listening on that port? Have you
checked rtpproxy log for errors?
Regards,
Razvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com
On 06/25/2012 05:58 PM, Arjun Shankar K S wrote:
Hi All,
Greeting to All!!
I have opensips and rtp proxy in the same machine with a public IP.
When I start the opensips with rtp proxy I get the below error.
/usr/local/sbin/opensips[1691]: WARNING:nathelper:rtpp_test: can't get
version of the RTP proxy
/usr/local/sbin/opensips[1691]: WARNING:nathelper:rtpp_test: support
for RTP proxy <udp:127.0.0.1:7890> has been disabled temporarily
/usr/local/sbin/opensips[1683]: ERROR:nathelper:send_rtpp_command:
can't send command to a RTP proxy
/usr/local/sbin/opensips[1683]: ERROR:nathelper:send_rtpp_command:
proxy <udp:127.0.0.1:7890> does not respond, disable it
I started the rtp proxy with the below command,
./rtpproxy -l my_public_ip -s udp:127.0.0.1:7890 -F
My opensip.cfg file has the following additions for NAT Traversal,
#------Nat Params-------------
modparam("usrloc","nat_bflag", 6)
modparam("nathelper","rtpproxy_sock", "udp:127.0.0.1:7890")
modparam("nathelper","natping_interval", 30)
modparam("nathelper","ping_nated_only", 0)
modparam("nathelper","sipping_bflag", 7)
modparam("nathelper","sipping_from", "sip:pinger@PROXY_IP")
modparam("registrar","received_avp", "$avp(i:42)")
modparam("nathelper","received_avp", "$avp(i:42)")
Please let me know where is the mistake. Any help is deeply appreciated.
Thanks,
Arjun
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
