Well, that means your script execution does not get there....try to
place more xlogs in the beginning of the script to see what's the exec
path in there.
Regards,
Bogdan
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 08/16/2012 01:58 PM, Gomtesh Jain wrote:
Hi Bogdan,
I put 2 log messages before and after record_route to make sure it
gets executed.
But I dont's see those messages in log 1st scenario (2 route headers)
while I can see both the message in log in 2nd scenario (1 route header).
Here I give INVITE messages in 1st scenario...
INVITE sip:[email protected]:5506
<http://sip:[email protected]:5506> SIP/2.0
Via: SIP/2.0/TCP
192.168.3.134:1323;rport;branch=z9hG4bKPj564512b7c47d4f1c91bf69b2616eea18
Max-Forwards: 70
From:
sip:[email protected]:5506;tag=9fa0b4f78ee640dba4c6e0522c9c63a8
To: sip:[email protected]:5506
<http://sip:[email protected]:5506>
Contact: <sip:[email protected]:1321;transport=TCP;ob>
Call-ID: 8ba1014b656e4cdc968bcf4a9c92ae66
CSeq: 3514 INVITE
*Route: <sip:23.20.79.160:7060;transport=TCP;lr>
Route: <sip:208.109.191.105:8060;lr>*
Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, SUBSCRIBE, NOTIFY,
REFER, MESSAGE, OPTIONS
Supported: replaces, 100rel, timer, norefersub
Session-Expires: 300
Min-SE: 90
User-Agent: WebAstra
X-Info: normal;;P=;L=;S=Out;A=aa1;CI=;CS=1;PI=1;CP=1
Content-Type: application/sdp
Content-Length: 259
TCP Proxy fwds ...
INVITE sip:[email protected]:5506
<http://sip:[email protected]:5506> SIP/2.0
Via: SIP/2.0/UDP 23.20.79.160:7060;branch=z9hG4bK9618.b76ba1d3.0;i=fe
Via: SIP/2.0/TCP
192.168.3.134:1323;received=115.252.66.182;rport=1323;branch=z9hG4bKPj564512b7c47d4f1c91bf69b2616eea18
Max-Forwards: 69
From:
sip:[email protected]:5506;tag=9fa0b4f78ee640dba4c6e0522c9c63a8
To: sip:[email protected]:5506
<http://sip:[email protected]:5506>
Contact: <sip:[email protected]:1323;transport=TCP;ob>
Call-ID: 8ba1014b656e4cdc968bcf4a9c92ae66
CSeq: 3514 INVITE
Route: <sip:208.109.191.105:8060;lr>
Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, SUBSCRIBE, NOTIFY,
REFER, MESSAGE, OPTIONS
Supported: replaces, 100rel, timer, norefersub
Session-Expires: 300
Min-SE: 90
User-Agent: WebAstra
X-Info: normal;;P=;L=;S=Out;A=aa1;CI=;CS=1;PI=1;CP=1
Content-Type: application/sdp
Content-Length: 25
Thanx,
Gomtesh
On Thu, Aug 16, 2012 at 4:05 PM, Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
You say you do record_route(), but no RR header is added to the
request ? this is a bit hard to believe ....are you sure your
script ends to the RR function ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 08/16/2012 01:23 PM, Gomtesh Jain wrote:
Hi Bogdan,
I am doing ...
if (!method=="REGISTER")
{
xlog("L_NOTICE", "Before Add Record Route TCP
OPENSIPS \n");
record_route();
xlog("L_NOTICE", "Add Record Route TCP OPENSIPS \n");
}
in my config .
But in 1st scenario it does not add record route .So UA1 tries to
send ACK directly to "Other proxy". Which is wrong.
While it adds record route in 2nd scenario and all signalling
works fine.
Thanx,
Gomtesh
On Thu, Aug 16, 2012 at 3:43 PM, Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
Hi Gomtesh,
On 08/14/2012 04:10 PM, Gomtesh Jain wrote:
Hi,
I am running opensips 1.6 as TCP proxy. I am facing
problem when I use multiple proxy in my N/w.
UA1------> TCP proxy(opensips 1.6)------->Other
Proxy--------> UA2
UA1 adds 2 Route headers in INVITE.
In this scenario TCP proxy does not add Record Route in
INVITE.
How comes ?? don;t you do record_route() on the opensips ??
UA1------> TCP proxy(opensips 1.6)------------> UA2
UA1 add only 1 Route header.
In this scenario It works fine with the same conf.
What "fine" means ? It means opensips adds on route ? or ?
Regards,
Bogdan
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
