Hi All, I'm still having this issue. However, I went on with my investigation and I've discovered that this issue only happens with my SIP over TCP connections (I have 10 TCP connections) I've upgraded to version: Server:: OpenSIPS (1.7.2-notls (i386/linux))
And the issue is still there. Do you have any other ideas? (Disabling TCP is not an option) Thanks Diego > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Ali Pey > Sent: viernes, 10 de agosto de 2012 01:30 p.m. > To: OpenSIPS users mailling list > Subject: Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK response > under high load > > > > I can't think of anything else. > > > > Dear opensips team, > > > > Hope you had a good flight-terminator :) > > Can you take a look at this please? > > > > Thanks, > > Ali Pey > > > > > > On Fri, Aug 10, 2012 at 12:05 PM, Diego Barberio > <[email protected]> wrote: > > Hi Ali, > > > > Thanks again for rour feedbak. > > Unfortunately that's not the case. I'm attaching an example with the same > Via that works perfectly. > > > > Also, opensips works perfectly all day and only stops sending some OKs > during peak hour. > > > > Do you have any other idea? > > > > Thanks > > Diego > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Ali Pey > Sent: viernes, 10 de agosto de 2012 11:00 a.m. > > > To: OpenSIPS users mailling list > Subject: Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK response > under high load > > > > Hi Diego, > > > > I looked at your pcap file and I see that your second via has this: > > BC01.MBCSCR4.MSS.IMS.TIGO.COM.GT > > > > Is this a valid address? Maybe opensips can not resolve it so it ignores > the > via. Have you tried adding it to /etc/hosts. > > > > Compare a good 200OK with one of these and see if there is any difference. > > > > Regards, > > Ali Pey > > On Fri, Aug 10, 2012 at 9:20 AM, Diego Barberio > <[email protected]> wrote: > > Hi Ali, > > > > I removed set the debug flag to 0 and added the "-" before the file path, > and I sill have the same issue. > > Is there any other thing I can try? > > > > Thanks > > Diego > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Ali Pey > Sent: jueves, 09 de agosto de 2012 03:30 p.m. > To: OpenSIPS users mailling list > Subject: Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK response > under high load > > > > Hi Diego, > > > > Have you tried disabling the logging? That's usually the problem. Syslog > slows down opensips. > > > > Also in /etc/syslog.conf as '-' before the file path to make it > asynchronous. > > > > Regards, > > Ali Pey > > > > On Thu, Aug 9, 2012 at 2:19 PM, Diego Barberio > <[email protected]> wrote: > > Hello, > > I'm using opensips to forward incoming INVITEs to a set of 8 applications. > I'm using dispatcher module to achieve this. > During peak hour, opensips receives about 350 INVITEs per second, during > this period about 30 OK responses per second my application sends correctly > aren't forwarded by opensips. > > I've recompiled opensips so it can use more memory by modifing the config.h > file: > > #define PKG_MEM_POOL_SIZE 10*1024*1024 /*!< Used only if > PKG_MALLOC > is defined*/ > #define SHM_MEM_SIZE 320 /*!< Used if SH_MEM is > defined*/ > > > The incoming INVITEs come from UDP and TCP. > > > For each of the OK responses that aren't forwarded this entry appears in > the > messages file: > > usr/local/sbin/opensips[24554]: ERROR:core:forward_reply: no 2nd via found > in reply > > According to my research on the web this message means that the OK only has > one Via header, however this is not the case and the capture attached (made > on server which runs opensips) shows it. > > I've also tried to increase the log level, but it made opensips to work > slow > even in low traffic hours. > > > I run some test in my lab and opensips worked perfectly even under more > than > 350 INVITES per second, this problem only occurs in production > > I really don't know what else to do. > Could you help me to fix this issue or at least move on with the > investigation? > > Thanks > Diego > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > > >
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
