Hello everybody, i red the post and didn't work. Here is my command line to run rtpproxy and my configuration file of OPENSIPS, if some one could help me.
./rtpproxy -l PUBLICIP/192.168.1.220 -s udp:192.168.1.220:12333 -n tcp: 192.168.1.220:12333 -u user -m 35000 -M 35200 # # $Id: opensips_residential.m4 9042 2012-05-17 13:57:10Z vladut-paiu $ # # OpenSIPS residential configuration script # by OpenSIPS Solutions <[email protected]> # # This script was generated via "make menuconfig", from # the "Residential" scenario. # You can enable / disable more features / functionalities by # re-generating the scenario with different options.# # # Please refer to the Core CookBook at: # http://www.opensips.org/Resources/DocsCookbooks # for a explanation of possible statements, functions and parameters. # ####### Global Parameters ######### debug=3 log_stderror=no log_facility=LOG_LOCAL1 fork=yes children=4 /* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes /* comment the next line to enable the auto discovery of local aliases based on revers DNS on IPs */ auto_aliases=no /* It can be an IP address or string and represents the address advertised in Via header and other destination lumps (e.g RR header). If empty or not set (default value) the socket address from where the request will be sent is used. */ advertised_address="public_ip" listen=udp:192.168.1.220:5062 disable_tcp=no listen=tcp:192.168.1.220:5062 disable_tls=yes #port=5062 ####### Modules Section ######## #set module path mpath="/home/syrium/opensips_proxy/lib/opensips/modules/" #### SIGNALING module loadmodule "signaling.so" #### StateLess module loadmodule "sl.so" #### Transaction Module loadmodule "tm.so" modparam("tm", "fr_timer", 5) modparam("tm", "fr_inv_timer", 30) modparam("tm", "restart_fr_on_each_reply", 0) modparam("tm", "onreply_avp_mode", 1) #### Record Route Module loadmodule "rr.so" /* do not append from tag to the RR (no need for this script) */ modparam("rr", "append_fromtag", 0) #### MAX ForWarD module loadmodule "maxfwd.so" #### SIP MSG OPerationS module loadmodule "sipmsgops.so" #### FIFO Management Interface loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") modparam("mi_fifo", "fifo_mode", 0666) #### URI module loadmodule "uri.so" modparam("uri", "use_uri_table", 0) modparam("uri", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME #### MYSQL module loadmodule "db_mysql.so" #### USeR LOCation module loadmodule "usrloc.so" modparam("usrloc", "nat_bflag", 10) modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME #### REGISTRAR module loadmodule "registrar.so" modparam("registrar", "tcp_persistent_flag", 7) modparam("registrar", "received_avp", "$avp(received_nh)") /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) #### ACCounting module loadmodule "acc.so" /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_cancels", 0) /* by default we do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) modparam("acc", "failed_transaction_flag", 3) /* account triggers (flags) */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) modparam("acc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME #### AUTHentication modules loadmodule "auth.so" loadmodule "auth_db.so" modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME modparam("auth_db", "load_credentials", "") #### DOMAIN module loadmodule "domain.so" modparam("domain", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME modparam("domain", "db_mode", 1) # Use caching modparam("auth_db|usrloc|uri", "use_domain", 1) #### DIALOG module loadmodule "dialog.so" modparam("dialog", "dlg_match_mode", 1) modparam("dialog", "default_timeout", 21600) # 6 hours timeout modparam("dialog", "db_mode", 2) modparam("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME #### NAT modules loadmodule "nathelper.so" modparam("nathelper", "natping_interval", 10) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "received_avp", "$avp(received_nh)") loadmodule "nat_traversal.so" loadmodule "rtpproxy.so" modparam("rtpproxy", "rtpproxy_sock", "1 == udp:192.168.1.220:12333") modparam("rtpproxy", "rtpp_notify_socket","tcp:192.168.1.220:12333") modparam("rtpproxy", "rtpproxy_autobridge", 1) ####### Routing Logic ######## # main request routing logic route{ force_rport(); if (nat_uac_test("23")) { if (is_method("REGISTER")) { fix_nated_register(); setbflag(10); } else { fix_nated_contact(); setflag(10); } } if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { # validate the sequential request against dialog if ( $DLG_status!=NULL && !validate_dialog() ) { xlog("In-Dialog $rm from $si (callid=$ci) is not valid according to dialog\n"); ## exit; } if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } else if (is_method("INVITE")) { # even if in most of the cases is useless, do RR for # re-INVITEs alos, as some buggy clients do change route set # during the dialog. record_route(); } if (check_route_param("nat=yes")) setflag(10); # route it out to whatever destination was set by loose_route() # in $du (destination URI). route(1); } else { if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after # a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction -> # ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); if ( !(is_method("REGISTER") ) ) { if (is_from_local()) { # authenticate if from local subscriber # authenticate all initial non-REGISTER request that pretend to be # generated by local subscriber (domain from FROM URI is local) if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (!db_check_from()) { sl_send_reply("403","Forbidden auth ID"); exit; } consume_credentials(); # caller authenticated } else { # if caller is not local, then called number must be local if (!is_uri_host_local()) { send_reply("403","Rely forbidden"); exit; } } } # preloaded route checking if (loose_route()) { xlog("L_ERR", "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]"); if (!is_method("ACK")) sl_send_reply("403","Preload Route denied"); exit; } # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { # create dialog with timeout if ( !create_dialog("B") ) { send_reply("500","Internal Server Error"); exit; } setflag(1); # do accounting } if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); route(1); } # requests for my domain if (is_method("PUBLISH|SUBSCRIBE")) { sl_send_reply("503", "Service Unavailable"); exit; } if (is_method("REGISTER")) { # authenticate the REGISTER requests if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; } if (!db_check_to()) { sl_send_reply("403","Forbidden auth ID"); exit; } if ( proto==TCP || 0 ) setflag(7); if (client_nat_test("3")) { nat_keepalive(); } if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # do lookup with method filtering if (!lookup("location","m")) { if (!db_does_uri_exist()) { send_reply("420","Bad Extension"); exit; } t_newtran(); t_reply("404", "Not Found"); exit; } if (isbflagset(10)) setflag(10); # when routing via usrloc, log the missed calls also setflag(2); route(1); } route[1] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { if (isflagset(10)) { set_rtp_proxy_set("1"); rtpproxy_offer("ro"); } t_on_branch("2"); t_on_reply("2"); t_on_failure("1"); if (client_nat_test("3")) { nat_keepalive(); } } if (isflagset(10)) { add_rr_param(";nat=yes"); } if (!t_relay()) { send_reply("500","Internal Error"); }; exit; } branch_route[2] { xlog("new branch at $ru\n"); } #onreply_route[1]{ # xlog("reply route 1: sequential requests ($rs $rr)\n"); # if ( src_ip != onebox_asterisk1_ip && src_ip != onebox_asterisk2_ip ){ # if ( nat_uac_test( "31") ) { # fix_nated_contact(); # force_rport(); # if( has_body( "application/sdp" ) ) { # fix_nated_sdp( "3" ); # } # } # } #} onreply_route[2] { if (nat_uac_test("1")) fix_nated_contact(); if ( isflagset(10) ){ set_rtp_proxy_set("1"); rtpproxy_answer("ro"); } xlog("incoming reply\n"); } failure_route[1] { if (t_was_cancelled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} } local_route { if (is_method("BYE") && $DLG_dir=="UPSTREAM") { acc_db_request("200 Dialog Timeout", "acc"); } } 2012/11/12 [email protected] <[email protected]> > Or you can follow this tutorial and mend it to your needs, > > http://saevolgo.blogspot.com/2012/03/making-rtpproxy-work.html > > Regards, > Qasim > > > > On Mon, Nov 12, 2012 at 1:40 PM, spady <[email protected]> wrote: > >> Hi, take a look at my post. Probably you will find a solution for your >> issue. >> >> >> http://opensips-open-sip-server.1449251.n2.nabble.com/Rtpproxy-connection-td7581935.html >> >> >> >> -- >> View this message in context: >> http://opensips-open-sip-server.1449251.n2.nabble.com/RTPProxy-Problem-tp7582930p7582943.html >> Sent from the OpenSIPS - Users mailing list archive at Nabble.com. >> >> _______________________________________________ >> Users mailing list >> [email protected] >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > >
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
