Just send you modified configuration file in private email. Hope this works.
Let me know if you need any further assistance. Thank you. On Sun, Nov 18, 2012 at 4:54 PM, M. KHaled W. Chehab <[email protected]>wrote: > Thank Mohammad, > > really appriciated. > waiting your script. > > khaled chehab > > Sent from my android device. > > > -----Original Message----- > From: Muhammad Shahzad <[email protected]> > To: OpenSIPS users mailling list <[email protected]> > Sent: Sun, 18 Nov 2012 4:45 PM > Subject: Re: [OpenSIPS-Users] calls have max call duration > > humm, how can this be? It always works. Something is really weird going on > in your opensips configuration. > > OK, let me prepare an alternative configuration for you and send you in > 2-3 > hours. > > BTW, you can call me Muhammad. > > Thank you. > > > On Sun, Nov 18, 2012 at 12:34 AM, M. KHaled W. Chehab > <[email protected]>wrote: > > > dears, > > > > the mediaproxy timeout didnt.suceed any more ideas? > > > > Regards > > > > Sent from my android device. > > > > > > > > -----Original Message----- > > From: "M.Khaled W Chehab" <[email protected]> > > To: 'OpenSIPS users mailling list' <[email protected]> > > Sent: Fri, 16 Nov 2012 5 <20125>:18 PM > > Subject: Re: [OpenSIPS-Users] calls have max call duration > > > > Dears,**** > > > > ** ** > > > > Thanks for your kindly reply, and I will try to arrange my opensips > > configuration file and send it back if the media configuration didn’t > > solve this problem ,**** > > > > BTW I am using a mix between a residential and trunking script ,do you > > have a config tested having a permission ,routing dialplan module > tested > > for small carrier level ,you can send me a copy of it .**** > > > > **** > > > > My old config mediaproxy was **** > > > > stream_timeout = 90**** > > > > on_hold_timeout = 3540**** > > > > so set it now to **** > > > > stream_timeout = 30**** > > > > on_hold_timeout = 600**** > > > > ** ** > > > > I will monitor it now and inform you about the result , but my > question > > is ,is there a solution using signaling function I can implement ?**** > > > > ** ** > > > > ** ** > > > > Regards**** > > > > ** ** > > > > ** ** > > > > ** ** > > > > ** ** > > > > *From:* [email protected] [mailto: > > [email protected]] *On Behalf Of *Muhammad Shahzad > > *Sent:* Friday, November 16, 2012 5 <20125>:01 PM > > *To:* OpenSIPS users mailling list > > *Subject:* Re: [OpenSIPS-Users] calls have max call duration**** > > > > ** ** > > > > Your opensips config is pretty messed up and hard to read. So, while i > try > > to read it to find the problem, as a workaround you should set RTP > timeouts > > in your mediaproxy configuration file (i.e. config.ini), e.g.**** > > > > ** ** > > > > stream_timeout = 30**** > > > > on_hold_timeout = 1800 > > > > This will result in automatic call hangup if there is no media for at > > least 30 seconds. This will reduce wrong billing problem to 30 seconds, > and > > your customer's balance will not be exhausted completely. Similarly if > call > > is on hold for more then 30 minutes and no media is transferred during > this > > time (not even music on hold) then call will hangup (change this timeout > to > > whatever appropriate for you).**** > > > > ** ** > > > > Thank you.**** > > > > ** ** > > > > On Fri, Nov 16, 2012 at 2:13 PM, M.Khaled W Chehab <[email protected]> > > > wrote:**** > > > > Dears,**** > > > > **** > > > > How to drop the call when a cancel received from UA and a 200 OK from > > the trunk in the same second, note back the client cdr will be a > canceled > > call and the trunk cdr will be 1 sec duration but on my cdr its the max > > daialog timeout duration**** > > > > **** > > > > I am searching for a solution for this since two weeks as I tried all > > trick I know and all didn’t succeed ,**** > > > > Find attached the scenario I have problem with, which you can find it at > > wireshark time line (30.877027 <30877027>) the Client with IP ( > 74.114.101.170) > > sends a cancel ,and the opensips version 1.8.2 server with IP > > 89.207.133.144 send the client 200 canceling and in its terms > forward > > the cancel to the trunk provider with IP 74.114.101.190 ,but at > 31.015333 <31015333> > > wireshark time line the trunk sends a 200 OK then 487 request > terminated > > and the billing stops from the trunk provider .**** > > > > The problem is my opensips with IP 89.207.133.144 didn’t hangup the > call > > and go for the max call duration in the dialog module .**** > > > > -how to let opensips cancel the call immediately and stop it with no > > billing .**** > > > > Please find attached my opensips.cfg configuration file **** > > > > **** > > > > Regards**** > > > > **** > > > > **** > > > > Khaled Chehab**** > > > > Senior NGN Engineer**** > > > > [image: Description: icucall]**** > > > > Operations Office - Lebanon**** > > > > Office : +961 1 515155 <+9611515155> ext 300**** > > > > Mobile : +961 3 045212 <+9613045212>**** > > > > E-mail : [email protected]**** > > > > MSN ID :[email protected] **** > > > > Skype : k_chehab **** > > > > Web Site: http://www.icucall.com**** > > > > http://www.allohi.com**** > > > > **** > > > > > > _______________________________________________ > > Users mailing list > > [email protected] > > http://lists.opensips.org/cgi-bin/mailman/listinfo/users**** > > > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > -- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +49 176 99 83 10 85 MSN: [email protected] Email: [email protected]
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
