Hi 501 was being sent by IMS server only. Messages were not passing over to opensips. Thus, I changed the config file. Now after changing the config file opensips and openIMS are starting individually. My users: [email protected] and [email protected] are able to register through xlite/linphone and myMonster, but when i try to change the status through myMonster '403 Preload route denied' comes from opensips. I am taking this trace through ngrep on port 5060.
I tried adding alias=scscf.open-ims.test:6060 in the config file but again error 403-preload route denied error comes. Kindly find my config file attached. Also, find the ngrep trace below: *root@jaytirth-desktop:/etc/opensips# ngrep -W byline -d eth0 port 5060 interface: eth0 (192.168.0.0/255.255.0.0) filter: (ip or ip6) and ( port 5060 ) # U 192.168.1.100:4060 -> 192.168.1.50:5060 . # U 192.168.1.50:5060 -> 192.168.1.100:4060 PUBLISH sip:[email protected] SIP/2.0. Call-ID: [email protected]. CSeq: 1 PUBLISH. From: <sip:[email protected]>;tag=1004. To: <sip:[email protected]>. Via: SIP/2.0/UDP 192.168.1.50:5060 ;branch=z9hG4bKf87115d70bedecfaa71e064e979efcee393437. Max-Forwards: 20. Route: <sip:[email protected]:6060;lr>. Event: presence. Accept: application/pidf+xml. Expires: 3600. Content-Type: application/pidf+xml. User-Agent: monster Version: 0.9.25. Content-Length: 607. . <?xml version='1.0' encoding='utf-8' ?><presence entity="sip:alice@open-ims.test" xmlns="urn:ietf:params:xml:ns:pidf" xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model" xmlns:rpidf="urn:ietf:params:xml:ns:pidf:rpid" xmlns:op="urn:oma:xml:prs:pidf:oma-pres" xmlns:opd="urn:oma:xml:pde:pidf:ext"><tuple id="com1"><status><basic>open</basic></status><op:willingness><opd:basic>open</opd:basic></op:willingness></tuple><dm:person id="per123"><rpidf:activities id="act1"><rpidf:away /></rpidf:activities><op:overriding-willingness><opd:basic>open</opd:basic></op:overriding-willingness></dm:person></presence> # U 192.168.1.100:4060 -> 192.168.1.50:5060 SIP/2.0 403 Preload Route denied. Call-ID: [email protected]. CSeq: 1 PUBLISH. From: <sip:[email protected]>;tag=1004. To: <sip:[email protected]>;tag=88edf4f3f0a2949424b8dd565628593e.ba90. Via: SIP/2.0/UDP 192.168.1.50:5060 ;rport=5060;branch=z9hG4bKf87115d70bedecfaa71e064e979efcee393437. Server: OpenSIPS (1.7.0-beta-notls (i386/linux)). Content-Length: 0. . # U 192.168.1.100:4060 -> 192.168.1.50:5060* Kindly help and show the way forward. On Wed, Feb 6, 2013 at 11:35 PM, Bogdan-Andrei Iancu <[email protected]>wrote: > ** > Do you see any traffic reaching OpenSIPS presence ? it is opensips sending > the 501 ? > > Regards, > > Bogdan-Andrei Iancu > OpenSIPS Founder and Developerhttp://www.opensips-solutions.com > > > On 02/06/2013 07:38 PM, garima sharma wrote: > > Hi > > I was trying to run opensips presence modile in standalone mode over port > 5065. > I want to make it act as an application server running with open IMS core. > I tried the same by using the config file given in test directory. > Now my opensips is starting without error. Similary, openIMS starts > without error, but presence is not working.It gives 501 error in SIP trace > at wireshark. > > I thought i might be missing out some step. Thus, I wanted to know what is > the correct procedure such that opensips presence modules workes as > presence server with openIMS core. > > Regards > Garima > > On Wed, Feb 6, 2013 at 9:48 PM, Bogdan-Andrei Iancu > <[email protected]>wrote: > >> Hi Garima, >> >> What do you mean by "integrate opensips presence module with openIMS" ?? >> >> Regards, >> >> Bogdan-Andrei Iancu >> OpenSIPS Founder and Developerhttp://www.opensips-solutions.com >> >> >> On 02/06/2013 07:00 AM, garima sharma wrote: >> >> >> Hello >> >> I am able to run openIMS server and opensips as presence server >> individually. >> Now as next step, I want to integrate opensips presence module with >> openIMS. >> I tried changing opensips.cfg file as per the link given below: >> >> http://uctimsclient.berlios.de/presence_server_howto.html >> But was unsuccessful. I have read many articles regarding the same and >> now I am confused >> how to start as some articles say we should configure presence server in >> standalone mode without register module. >> Others use register module. I have tried both the configuration files but >> i am unsuccessful. >> >> Kindly help me in integration by telling me how to start. My opensips >> version is 1.7.0-1. >> >> -- >> Thanks and Regards >> Garima Sharma >> >> >> _______________________________________________ >> Users mailing >> [email protected]http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> > > > -- > Thanks and Regards > Garima Sharma > > -- Thanks and Regards Garima Sharma -- Thanks and Regards Garima Sharma
opensips.cfg
Description: Binary data
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
