Well, do you want to do accouting via RADIUS (aaa) or via DB (in acc table) ???
Regards, Bogdan-Andrei Iancu OpenSIPS Founder and Developer http://www.opensips-solutions.com On 05/16/2013 01:18 PM, Michele Pinassi wrote: > Thanks Bodgan for your kindly reply but now accounting don't work: > nothing will be added to acc table ! > > Here's the full routing logic. Maybe there's something wrong: > > modparam("aaa_radius", "radius_config", > "/etc/radiusclient-ng/radiusclient.conf") > > > modparam("acc", "early_media", 0) > modparam("acc", "report_cancels", 0) > modparam("acc", "detect_direction", 0) > modparam("acc", "log_level", 1) > modparam("acc", "aaa_url", "radius:/etc/radiusclient-ng/radiusclient.conf") > modparam("acc", "aaa_flag", 1) > modparam("acc", "aaa_extra", "via=$hdr(Via[*]); \ > Digest-User-Name=$Au; \ > Calling-Station-Id=$from; \ > Called-Station-Id=$to; \ > Sip-Translated-Request-URI=$ru; \ > Sip-RPid=$avp(s:rpid); \ > Source-IP=$avp(s:source_ip); \ > Source-Port=$avp(s:source_port); \ > SIP-Proxy-IP=$avp(s:sip_proxy_ip); \ > Canonical-URI=$avp(s:can_uri); \ > > Divert-Reason=$avp(s:divert_reason); \ > User-Agent=$hdr(user-agent); \ > Contact=$hdr(contact); \ > Event=$hdr(event) ;\ > ENUM-TLD=$avp(s:enum_tld)") > > > ####### Routing Logic ######## > > route{ > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > } > > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > exit; > }; > > if (check_address("4","$si","$sp","$proto")) { > # xlog("L_INFO","IP $si Allowed"); > } else { > xlog("L_INFO","IP $si Forbidden"); > sl_send_reply("403", "Forbidden"); > } > > > if (has_totag()) { > if (loose_route()) { > if (is_method("BYE")) { > setflag(1); > } else if (is_method("INVITE")) { > record_route(); > } > route(1); > } else { > /* uncomment the following lines if you want to enable > presence */ > if (is_method("SUBSCRIBE") && $rd == "voip.unisi.it") { > route(2); > exit; > } > if ( is_method("ACK") ) { > if ( t_check_trans() ) { > t_relay(); > exit; > } else { > exit; > } > } > sl_send_reply("404","Not here"); > } > exit; > } > > if (is_method("CANCEL")) > { > if (t_check_trans()) > t_relay(); > exit; > } > > if (is_method("INVITE")) { > setflag(1); > } > > t_check_trans(); > > if (!(method=="REGISTER") && is_from_local()) > { > if(!check_source_address("0")){ > if (!proxy_authorize("", "subscriber")) { > proxy_challenge("", "0"); > exit; > } > if (!db_check_from()) { > sl_send_reply("403","Forbidden auth ID"); > exit; > } > > consume_credentials(); > # caller authenticated > } > } > > # preloaded route checking > if (loose_route()) { > xlog("L_ERR", "Attempt to route with preloaded Route's > [$fu/$tu/$ru/$ci]"); > if (!is_method("ACK")) > sl_send_reply("403","Preload Route denied"); > exit; > } > > # record routing > if (!is_method("REGISTER|MESSAGE")) > record_route(); > > if (!uri==myself) { > append_hf("P-hint: outbound\r\n"); > route(1); > } > > if( is_method("PUBLISH|SUBSCRIBE")) { > route(2); > } > > > if (is_method("REGISTER")) { > # authenticate the REGISTER requests (uncomment to enable auth) > if (!www_authorize("", "subscriber")) > { > www_challenge("", "0"); > exit; > } > > if (!db_check_to()) > { > sl_send_reply("403","Forbidden auth ID"); > exit; > } > > if (!save("location")) > sl_reply_error(); > > exit; > } > > if ($rU==NULL) { > # request with no Username in RURI > sl_send_reply("484","Address Incomplete"); > exit; > } > > # media service number? (digits starting with *) > if($rU=~"^\*") { > route(4); > } > > # apply DB based aliases (uncomment to enable) > alias_db_lookup("dbaliases"); > > # do lookup with method filtering > if (!lookup("location","m")) { > switch ($retcode) { > case -1: # Note here: check for blacklist numbers > if (!check_blacklist("globalblacklist")) { > sl_send_reply("403", "Forbidden"); > exit; > } > # Then route it ! > cr_user_carrier("$fU", "$fd", "$avp(carrier)"); > if($avp(carrier)==0) { > xlog("L_INFO","Not here: default route > [$fd/$fu/$rd/$ru/$si]\n"); > > if($(rU{s.len}) < 4) { > xlog("L_ERR", "Number > incomplete/failure for $rU\n"); > prefix("FAIL_"); > route(4); > } > > if(!cr_route("default", "$fd", "$rU", > "$rU", "call_id", > "$avp(host)")) { > xlog("L_ERR", "Number not found for > $rU\n"); > prefix("FAIL_"); > route(4); > } > } else { > xlog("L_INFO","Not here: user route > [$fd/$fu/$rd/$ru/$si/$avp(carrier)]\n"); > $avp(domain)="voip.unisi.it"; > if (!cr_route("$avp(carrier)", > "$avp(domain)", "$rU", > "$rU","call_id", "$avp(host)")) { > sl_send_reply("404", "Not found"); > xlog("L_ERR", "cr_route failed\n"); > exit; > } > } > t_on_failure("1"); > if (!t_relay()) { > sl_reply_error(); > }; > exit; > case -3: # internal error > t_newtran(); > t_reply("404", "Not Found"); > exit; > case -2: # method not supported > sl_send_reply("405", "Method Not Allowed"); > exit; > } > } > > # when routing via usrloc, log the missed calls also > # setflag(2); > > route(1); > } > > route[1] { > xlog("L_INFO","Route1 [$fd/$fu/$rd/$ru/$si/]\n"); > > > # for INVITEs enable some additional helper routes > if (is_method("INVITE")) { > t_on_branch("2"); > t_on_reply("2"); > t_on_failure("1"); > } > > if (!t_relay()) { > sl_reply_error(); > }; > exit; > } > > > # Presence route > route[2] { > xlog("L_INFO","Route2 [$fd/$fu/$rd/$ru/$si/]\n"); > > if (!t_newtran()) { > sl_reply_error(); > exit; > }; > > if(is_method("PUBLISH")) { > handle_publish(); > } else if( is_method("SUBSCRIBE")) { > handle_subscribe(); > } > > exit; > } > > route[4] { > xlog("L_INFO","Route4 [$fd/$fu/$rd/$ru/$si/]\n"); > > rewritehostport("172.20.1.5:5060"); > route(1); > } > > branch_route[2] { > xlog("L_INFO","Branch Route2 [$fd/$fu/$rd/$ru/$si/]\n"); > } > > onreply_route[1] { > xlog("L_INFO","OnReply Route1 [$fd/$fu/$rd/$ru/$si/]\n"); > > } > > onreply_route[2] { > xlog("L_INFO","OnReply Route2 [$fd/$fu/$rd/$ru/$si/]\n"); > > } > > failure_route[1] { > xlog("L_INFO","Failure Route1 [$fd/$fu/$rd/$ru/$si/]\n"); > > if (t_was_cancelled()) { > exit; > } > > if (t_check_status("408|5[0-9][0-9]")) { > if(!cr_route("default", "$fd", "$rU", "$rU", "call_id", > "$avp(host)")){ > t_reply("403", "Not allowed"); > } else { > t_on_failure("2"); > t_relay(); > } > } > } > > failure_route[2] { > xlog("L_INFO","Failure Route2 [$fd/$fu/$rd/$ru/$si/]\n"); > > if (t_was_cancelled()) { > exit; > } > > revert_uri(); > prefix("FAILURE_"); > rewritehostport("172.20.1.5:5060"); > t_relay(); > } > > > Thanks. > > Michele > > > On 16/05/2013 10:35, Bogdan-Andrei Iancu wrote: >> Hi Michele, >> >> The acc_aaa_request() function will generate a RADIUS acc request on the >> spot, so it will happen for all your INVITEs disregarding if the calls >> will establish or not in the future. >> >> If you want to account only established calls, do not use the >> acc_aaa_request() function, but trigger the accounting via flags only. >> Use the aaa_flag only (do not set aa_missed_flag) and it should do the >> trick. >> >> Regards, >> >> Bogdan-Andrei Iancu >> OpenSIPS Founder and Developer >> http://www.opensips-solutions.com > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
