Hello Bogdan,
I have validated the script and that i am passing a parameter. I also
changed the debug log statement that I displayed right before the save()
and I still get the same output. Here is the code that I use in the script:
xlog("SAVING THE SUBSCRIBER INTO THE LOCATION TABLE, test with
extra debug .......................................");
if (!save("location", "p1"))
{
xlog("L_ERR", "ERR:callerid:$ci|end|System error trying to save
Register's request location");
sl_reply_error();
}
xlog("L_INFO", "INFO:callerid:$ci|end|The subscriber has
successfully registered with Akan Voice");
exit;
Is there a better way to validate? I am not sure of what else to check.
Thanks
Nathaniel L Keeling
On 5/22/13 6:02 AM, Bogdan-Andrei Iancu wrote:
Hi Nathaniel,
Well, the logs shows that save() does not receive any flags as
params...everything indicates that you do not have the params or you
are using the wrong config file.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 05/22/2013 08:22 AM, Nathaniel L Keeling III wrote:
Hello Bogdan,
Here is the output from the opensips log. I have also attached a
snippet from the log file.
May 21 23:39:15 OpenSips[14397]: [ID 257313 local1.debug]
DBG:registrar:save_aux: xXx - flags param is
May 21 23:39:15 OpenSips[14397]: [ID 154992 local1.debug]
DBG:registrar:save_aux: xXx - flags bitmask is <0>
May 21 23:39:15 OpenSips[14397]: [ID 269964 local1.debug]
DBG:registrar:pack_ci: xXx - flags are 0
Thanks
Nathaniel L Keeling
On 5/20/13 11:56 AM, Bogdan-Andrei Iancu wrote:
Hello Nathaniel,
See the attached patch - it logs more from the part where the params
are handled .
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 05/18/2013 09:33 AM, Nathaniel L Keeling III wrote:
Hello Bogdan,
Here are snippets from my script. I only have one place where I
execute the save function. Just wondering, could it be truncating a
byte?
modparam("usrloc", "nat_bflag", 10)
modparam("usrloc", "use_domain", 1)
modparam("usrloc", "db_mode", 3)
modparam("usrloc", "db_url",
"postgres://opensips:opensip...@ama.akan.net/opensips181t")
modparam("registrar", "tcp_persistent_flag", 7)
modparam("registrar", "received_avp", "$avp(received_nh)")
xlog("SAVING THE SUBSCRIBER INTO THE LOCATION TABLE
....................................................");
if (!save("location","p1"))
{
xlog("L_ERR", "ERR:callerid:$ci|end|System error trying to
save Register's request location");
sl_reply_error();
}
xlog("L_NOTICE", "NOTICE:callerid:$ci|end|The subscriber has
successfully registered with Akan Voice");
exit;
Thanks
Nathaniel
On 5/17/13 6:07 AM, Bogdan-Andrei Iancu wrote:
Hello Nathaniel,
That is odd.....it's like you do not set the "p1" flag ....
I tested and I with "p1" flag I get:
May 17 14:05:03 [7944] DBG:registrar:pack_ci: xXx - flags are 10
Are you sure your script gets to the right save() ??
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 05/17/2013 09:37 AM, Nathaniel L Keeling III wrote:
Hello Bogdan,
I added the patch and here is what I found: "OpenSips[4378]: [ID
269964 local1.debug] DBG:registrar:pack_ci: xXx - flags are 0". I
have also included the log file.
Thanks
Nathaniel Keeling
On 5/16/13 3:47 AM, Bogdan-Andrei Iancu wrote:
Hello Nathaniel,
Attached is an extended patch - remove the old one and apply
this one. Again look for any xXx logs .
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 05/14/2013 02:47 PM, Nathaniel L Keeling III wrote:
Hello Bogdan,
here is the output from opensips's og file of the save() with
the patch and the code snippet from the opensips.cfg. I did not
see any ant logs with "xXx". Also,I have usrloc's db_mode set to 3.
xlog("SAVING THE SUBSCRIBER INTO THE LOCATION TABLE
....................................................");
if (!save("location","p1"))
{
xlog("L_ERR", "ERR:callerid:$ci|end|System error trying
to save Register's request location");
sl_reply_error();
}
xlog("L_NOTICE", "NOTICE:callerid:$ci|end|The subscriber
has successfully registered with Akan Voice");
exit;
_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
