uac_auth() is buggy. It does not increment the CSeq and that is a big
problem.
Il 25/11/2013 09.33, Walter Klomp ha scritto:
Actually, I found this before, but this only works for 1 specific
general username and password for the PSTN gateway. I need this "per
user", how do I configure that ?
I.e. call A with userA,passwordA and call B with userB, passwordB ...
Nobody can help me ?
Walter.
On 25/11/13 3:52 pm, Rik Broers wrote:
I think this article contains everything you need exactly :) (at
least for the authentication part)
http://docs.huihoo.com/opensips/tutorials/uac/ar01s06.html
You need the UAC modules for this.
Regards,
Met vriendelijke groet,
Rik Broers
Voice Engineer
Disclaimer:
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is
uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt, vragen wij u om de inhoud niet te gebruiken, een
retourbericht te sturen naar de afzender om aan te geven dat het
verkeerd geadresseerd is, en de inhoud vervolgens te vernietigen.
The information taken in this message can be confidential and is only
ment for the addressed. If you are not the rightful receiver of this
message, we ask you, not to use the information in this message,
inform the sender about the incorrectly delivered email and then
destroy the contents of this email.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Walter Klomp
Sent: zondag 24 november 2013 16:43
To: [email protected]; OpenSIPS users mailling list
Subject: Re: [OpenSIPS-Users] Can I use alias_db to change credentials?
Hi Stefano,
Thanks for the confidence it can be done easily, but I have not seen
any example of how to do it... I do not want to have to resort to
sending the call to asterisk where I then call the pstn softswitch
with the proper credentials, I'd like to do that directly in opensips...
i.e. PSTN -> opensips (replacing username/password & new destination
number) -> Softswitch -> PSTN
is there a module I can use, (using opensips 1.8.x), and how exactly
do I use it? (I know how to pull the username and password and
destination number from the database)
an example would greatly help me.
Thanks
Walter.
On 24/11/13 4:46 pm, Stefano Pisani wrote:
You can query a ad using avp_query and get new credentials, then use
them in the routing script.
This is not complicated.
Il 24/11/2013 01.38, Walter Klomp ha scritto:
Hi,
I want to enable call forwarding feature to pstn, but the outbound
calls need to be authenticated to the outbound proxy server with the
credentials of the user (callee) to be billed. How do I go around
doing this? Callerid should remain intact, would optionally want to
add the countrycode in front.
Anybody has done this before and can give me some pointers?
Thanks in advance
Walter
_______________________________________________
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
