Hi Kaan,
As said, the 405 reply is from script and is trigger if you have initial
SIP requests that are not INVITEs - check your sip traffic or, in the
script, log (via xlog) the method name when this 405 is sent.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 25.05.2014 23:45, Kaan Dandin wrote:
Hi Bogdan,
Thanks for your quick answer.
I have tried SIP REGISTER by loading and configuring Dispatcher
module , but faced same error message.
In the mean time , I have investigated a paper which used OpenSIPS as LB.
In this paper it mentions that it is using Opensips as Load Balancer
and also uses LB for SIP REGISTRATION.
,
BR,
Kaan
On 23 May 2014, at 15:47, Bogdan-Andrei Iancu <[email protected]
<mailto:[email protected]>> wrote:
Kaan,
The LB module is exclusively for calls (nothing else than INVITEs) -
because the "load" is the actual number of calls (please refer to the
documentation).
If you want to distribute/LB other methods, I recommend you using the
dispatcher module.
http://www.opensips.org/html/docs/modules/1.11.x/dispatcher.html
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 23.05.2014 13:35, Kaan Dandin wrote:
Hi Bogdan,
Thanks for the quick response.
The method is Register. I am using standard load balancer
configuration script generated by opensips version 1.9 make
menuconfig. Which lines I should add for register method.?
BR,
Kaan
Samsung Mobile tarafından gönderildi
-------- Orjinal mesaj --------
Kimden: Bogdan-Andrei Iancu
Tarih:23 05 2014 13:16 (GMT+02:00)
Alıcı: OpenSIPS users mailling list ,[email protected]
Konu: Re: [OpenSIPS-Users] Using Opensips as loadbalancer(Status 405
Method not allowed 0 bindings)
Hi Kaan,
If OpenSIPS is the one sending the 405 reply (you can check that by
simply doing a sip capture on the opensips machine), it is from the
script - check what method you have in your test traffic - that
method may be rejected from the script you use.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 22.05.2014 21:22, Kaan Dandin wrote:
Hi all,
I am building a test environment using OpenSIPS and OpenIMS.
I have successfuly installed OpenIMS and able to make registrations
and start calls from Monster client.
Between the IMS client and OpenIMS P-CSCF’s , I will put OpenSIPS
as load balancer.
I have installed OpenSIPS and “OpenSIPS Control Panel” successfully.
I have inserted the configuration for load balancing from OpenSIPS
Control Panel as following.
mysql> select * from load_balancer;
+----+----------+-----------------+-----------+------------+-------------+
| id | group_id | dst_uri | resources | probe_mode |
description |
+----+----------+-----------------+-----------+------------+-------------+
| 4 | 1 | sip:192.168.2.2 | pstn=500 | 0 |
pcscf2 |
| 3 | 1 | sip:192.168.2.1 | pstn=500 | 0 |
pcscf1 |
+----+----------+-----------------+-----------+------------+-------------+
When I start a registration from Monster IMS client I get
following error.
192.168.2.10 192.168.2.141 SIP Request: REGISTER sip:open-ims.test
192.168.2.141 192.168.2.10 SIP Status: 405 Method Not Allowed (0
bindings)
Load balancer:192.168.2.141
Client:192.168.2.10
Can someone help me to identify this problem?
BR,
Kaan
Windows Posta'dan gönderildi
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
