Dear Andrei,
Thank you for your reply. I have added the alias too but the problem
is still there.
First of all I am using the default generated residential script.
What i have figured out is that the loop is
starting here :
if (!uri==myself) {
and can't pass through to the registration method below at all:.
So it seems that uri(185.46.x.x) is different from myself variable.
is there any way to print myself variable to check what opensips sees
as myself?
opensips.cfg is started with those variables set:
-------------------------------------------------
advertised_address="185.46.X.X"
advertised_port=5060
alias="185.46.X.X:5060"
listen=udp:0.0.0.0:5060
-------------------------------------------------
first place on script I am printing some variables using the
following xlogs:
route{
xlog("L_INFO","CVAPP: route($rm/$du/$fu/$tu)\n");
xlog("L_INFO",
"------------------------------------------------------------------------------------------------\n");
xlog("L_INFO", "$ci|start|recieved $oP request $rm $ou\n");
xlog("L_INFO", "$ci|log|source $si:$sp\n");
xlog("L_INFO", "$ci|log|from $fu\n");
xlog("L_INFO", "$ci|log|to $tu\n");
xlog("L_INFO",
"------------------------------------------------------------------------------------------------\n");
.....
......
And here is a print out while trying to register. This is just FYI:
CVAPP:
route(REGISTER/<null>/sip:[email protected]/sip:[email protected])
------------------------------------------------------------------------------------------------
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|start|recieved udp request REGISTER
sip:185.46.X.X
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|source 185.46.X.X:5060
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|from sip:[email protected]
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|to sip:[email protected]
------------------------------------------------------------------------------------------------
CVAPP:
route(REGISTER/<null>/sip:[email protected]/sip:[email protected])
------------------------------------------------------------------------------------------------
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|start|recieved udp request REGISTER
sip:185.46.X.X
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|source 213.249.X.X:19017
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|from sip:[email protected]
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|to sip:[email protected]
------------------------------------------------------------------------------------------------
CVAPP:
route(REGISTER/<null>/sip:[email protected]/sip:[email protected])
------------------------------------------------------------------------------------------------
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|start|recieved udp request REGISTER
sip:185.46.X.X
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|source 213.249.X.X:19017
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|from sip:[email protected]
H4D5WH9k0OMUcXZtWUYiqhAgcev9YzSk|log|to sip:[email protected]
------------------------------------------------------------------------------------------------
As you can see, the opensips logs has many Register requests that
come from its own IP (185.46.X.X) as $si and then after many many
register requests the xlog shows the correct customer IP as Source. I
don't
know if this is a problem.
thank you in advance
----
Vasilios Tzanoudakis
On 03/02/2015 07:50 μμ, Bogdan-Andrei Iancu wrote:
Hi Vasilios,
The "too many hops" reply typically indicates a looping of the
REGISTER through OpenSIPS - OpenSIPS is sending that REGISTER to
itself via loopback interface. Why ? because of a configuration
error - the SIP domain in REGISTER RURI is not recognized by
OpenSIPS as a local domain, but it points to the OpenSIPS IP via DNS.
Be sure the domain you have in RURI is set as local domain in
OpenSIPS cfg . The 185.46.X.X IP you have there should be configured
as "alias" in OpenSIPS.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 03.02.2015 15:14, Vasilios Tzanoudakis wrote:
Dear all,
I have installed Opensips 1.11-3 on 1:1 NAT Server but registration
fails with "too many hops".
I am using the advertised_address feature with IP: 185.46.X.X but
its not working.
The configuration file with registration procedure is working fine
on a host with public IP.
I have tested the same setup with opensips 1.8.x version and the
problem is also there.
also have tested with or without alias feature enabled.
opensips config
==================================
advertised_address="185.46.x.x" #public IP here
advertised_port=5060
listen=udp:192.168.70.109:5060
==================================
I am sending you a pastebin url of debug: 5 -
http://pastebin.com/VWr68982
Thank you for your support
Vasilios Tzanoudakis
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
