Hi Andrei,
I am wanted to do lookup in location table when a call comes
from a gateway .
What should I do for that ?
I have added the gateway in the dr_gateways table like :
+----+------+------+--------------------+-------+------------+-------+------------+-------+--------+-------------+
| id | gwid | type | address | strip | pri_prefix | attrs |
probe_mode | state | socket | description |
+----+------+------+--------------------+-------+------------+-------+------------+-------+--------+-------------+
| 1 | gw1 | 0 | 192.1.1.1:5506 <http://192.1.1.1:5506> |
0 | NULL | NULL | 0 | 0 | NULL |
|
+----+------+------+--------------------+-------+------------+-------+------------+-------+--------+-------------+
And in my cfg i have written like bellow
I have added the drouting module .
loadmodule "drouting.so"
...............
modparam("drrouting", "db_url",
"mysql://root:root@localhost/opensips")
modparam("drouting", "use_domain", 1)
modparam("drouting", "drd_table", "dr_gateways")
modparam("drouting", "drr_table", "dr_rules")
modparam("drouting", "drg_table", "dr_groups")
modparam("drouting", "drc_table", "dr_carriers")
if( is_from_gw("1") || (to_uri=~"@192.1.1.161
<http://192.1.1.161>"))
{
xlog( "L_WARN", "Source IP sas : $Ri To Uri :
$tu From : $fU Request URI: $oU Call ID:$ci" );
# alias_db_lookup("dbaliases");
if ( !lookup("location")){
sl_send_reply("404","NO Match Found");
#
cache_store("redis:group1","method,$ci","$rm,$Ts");
exit;
}
}
When I am calling from 192.1.1.1:5506 <http://192.1.1.1:5506> ,
then call wont enter this loop .
What is wrong in the configuration and please let me know if
I need to do something else for this ?
*/Thanks & Regards/*
/Sasmita Panda/
/Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
On Wed, Sep 23, 2015 at 7:15 PM, Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
Sasmita,
The dr_rules table contains the routing rules - please
carefully read the module docs, as this is explained over there.
A routing rule refers to gateway directly, or via a carrier.
Using carriers is optional.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 23.09.2015 16:36, Sasmita Panda wrote:
HI Andrei ,
Thank you for your reply . what ever you said , that is
only for the gateway .
What about the route table of lcr module ? I think I need to
add the route in dr_carrier table .
But in which format ? If I am wrong then what about the
dr_carrier and dr_group table do in dynamic routing module ?
Can you please give me a brief knowledge?
*/Thanks & Regards/*
/Sasmita Panda/
/Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
On Wed, Sep 23, 2015 at 1:54 PM, Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>> wrote:
Hi Sasmita,
Build a routing group (1, for example as this):
Put in dr_rules:
+--------+---------+--------+---------+----------+---------+--------+-------+-------------+
| ruleid | groupid | prefix | timerec | priority |
routeid | gwlist | attrs | description |
+--------+---------+--------+---------+----------+---------+--------+-------+-------------+
| 100 | 1 | | | 0 | NULL
|asterisk| NULL | |
+--------+---------+--------+---------+----------+---------+--------+-------+-------------+
and it dr_gateways:
+----+--------+------+----------------+-------+------------+-------+------------+-------+--------------------+-------------+
| id | gwid | type | address | strip |
pri_prefix | attrs | probe_mode | state |
socket | description |
+----+--------+------+----------------+-------+------------+-------+------------+-------+--------------------+-------------+
| 1 |asterisk| 0 | 127.0.0.1:5080
<http://127.0.0.1:5080> | 0 | NULL | NULL
| 0 | 0 | NULL | |
+----+--------+------+----------------+-------+------------+-------+------------+-------+--------------------+-------------+
Best regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 22.09.2015 15:16, Sasmita Panda wrote:
Hi All ,
I am trying to upgrade opensips-1.6 to opensips-1.11 .
As everybody know opensips-1.11 uses dynamic routing in
place of lcr module .
I have a simple scenario and , I wanted to and a
route and a gateway for the particular route so that my
call get routed to the gw .
In lcr tables my schema is looking like bellow :
lcr routes
+----+--------+-----------------------------+--------+----------+
| id | prefix | from_uri | grp_id | priority |
+----+--------+-----------------------------+--------+----------+
| 4 | | .*@xyz.xxx.com.* | 5 | 0 |
lcr gateways
+---------------+----------------+------+------------+-----------+--------+-------+------+-------+
| gw_name | ip_addr | port | uri_scheme |
transport | grp_id | strip | tag | flags |
+---------------+----------------+------+------------+-----------+--------+-------+------+-------+
| asterisk | 127.1.1.200 | 5080 | 1 | 1 |
5 | 0 | | 0 |
I have simply add a route and for the same grp_id I
have added a gateway .
How I will do the same thing in dynamic routing ? I
have gone through the document of dynamic routing
module . But I am not able to understand the schema .
Can anyone pleas help me , how to proceed ??
*/Thanks & Regards/*
/Sasmita Panda/
/Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
